[Thu May 31 20:24:28 2012] Detection parameters:
  Position = (307.1, 275.1) = 12 5 18.70 -62 3 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4682.5 +/- 82.7
  Background counts = 75.9
  Rate = 0.08 +/- 0.001

[Thu May 31 20:24:29 2012] Off-axis axis estimate = 1.80'
[Thu May 31 20:27:43 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Thu May 31 20:27:43 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Thu May 31 20:27:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Thu May 31 20:27:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.33"
[Thu May 31 21:42:41 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 31 21:42:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_src1.csv
[Thu May 31 21:42:41 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 31 21:42:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_src1.csv
[Thu May 31 21:42:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 21:42:42 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 31 21:42:42 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 31 21:42:42 2012] Fit fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 31 23:18:36 2012] Spatial fit model total counts = 4786.400000, observed total counts = 4678.000000
[Thu May 31 23:18:36 2012] Offset between fit and detection position for source 1 = 0.141157 pixels
[Thu May 31 23:18:36 2012] 4781.540000 total counts/ 1551.180000 bgd. counts: snr = 82.020011
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.141157 pixels
  Position = (307.0, 275.2) = 12 5 18.76 -62 3 11.1
  Extent = 5.6 (5.5-5.8)", rotation angle = 0
  Source counts = 3230.4 +/- 69.1
  Background counts = 1551.2
  Rate = 0.05 +/- 0.001
[Thu May 31 23:18:37 2012] Vigneting correction estimate = 1.000000
[Thu May 31 23:18:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 23:18:37 2012] Assessing source extent using major axis lower bound
[Thu May 31 23:18:37 2012] Source does appear to be extended
[Thu May 31 23:18:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 23:19:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 23:19:02 2012] Initial guess for spatial extent in simple fitting = 5.65"
[Thu May 31 23:19:02 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.237
[Thu May 31 23:19:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.65"
[Fri Jun  1 00:34:59 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  1 00:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 00:34:59 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  1 00:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 00:34:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 00:35:00 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  1 00:35:00 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  1 00:35:00 2012] Fit fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  1 01:51:05 2012] Spatial fit model total counts = 4783.890000, observed total counts = 4678.000000
[Fri Jun  1 01:51:05 2012] Offset between fit and detection position for source 1 = 0.000421 pixels
[Fri Jun  1 01:51:05 2012] 4779.960000 total counts/ 1548.560000 bgd. counts: snr = 82.115795
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000421 pixels
  Position = (307.0, 275.2) = 12 5 18.76 -62 3 11.1
  Extent = 5.6 (5.5-5.8)", rotation angle = 0
  Source counts = 3231.4 +/- 69.1
  Background counts = 1548.6
  Rate = 0.05 +/- 0.001
[Fri Jun  1 01:51:05 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 01:51:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 01:51:05 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 01:51:05 2012] Source does appear to be extended
[Fri Jun  1 01:51:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 01:51:29 2012] Counts = 3231.400000, rescaling region sizes by 2.000000
[Fri Jun  1 01:51:29 2012] XMMSAS src. selection expression = ellipse(26658.767834, 23896.802000, 677.869220, 677.869220, 0.000000, X, Y)
[Fri Jun  1 01:51:29 2012] Writing source region out to fullrun_pn_xmm0109110101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun  1 01:51:29 2012] Extracting stamp from image fullrun_pn_xmm0109110101_pi300-10000_cl_sm2.00.img.gz, (268, 236) - (346, 314)
[Fri Jun  1 01:51:29 2012] XMMSAS bgd. selection expression = annulus(26658.767834, 23896.802000, 2259.564065, 4519.128130, X, Y) && !ellipse(28752.405548, 21854.039398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25718.713318, 21791.303711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21394.740570, 21351.719803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29641.373077, 20367.387604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30892.815826, 27523.472137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24483.442220, 27163.935900, 320.001114, 320.001114, 0.000000, X, Y) && !ellipse(22421.989000, 26953.975400, 518.685615, 518.685615, 0.000000, X, Y) && !ellipse(27533.343536, 26590.789551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25706.320260, 24753.414400, 403.584012, 403.584012, 0.000000, X, Y) && !ellipse(27299.727509, 23302.612762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23733.577118, 22619.348938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21854.553146, 21983.187988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30546.045105, 19728.156113, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 01:51:29 2012] Writing fullrun_pn_xmm0109110101_pi300-10000_pass1_cl_src1.gif
[Fri Jun  1 01:51:45 2012] Mean detx,y = (77.04, -351.72) 
[Fri Jun  1 01:51:49 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 01:52:53 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 01:52:53 2012] Setting source spectrum file to fullrun_pn_xmm0109110101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  1 01:52:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109110101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun  1 04:28:45 2012] Updating aperture counts using extracted products
[Fri Jun  1 04:28:45 2012] Error reading totcts from fullrun_pn_xmm0109110101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  1 04:28:46 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 04:28:46 2012] Using photon index=1.80, rate=0.0456, arf fullrun_pn_xmm0109110101_pi300-10000_pass1_cl_src1.arf
[Fri Jun  1 04:28:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 04:28:46 2012] Updating source flux to 1.1e-13
[Fri Jun  1 04:31:38 2012] Reading fit data from xmm0109110101/analysis//spectral/fullrun_pn_xmm0109110101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun  1 04:31:38 2012] Spectral fit parameter nH value = 9.45402e+20
[Fri Jun  1 04:31:38 2012] Spectral fit parameter PhoIndex value = 2.67841
[Fri Jun  1 04:31:38 2012] Failed to get F(0.3-8.0) from xmm0109110101/analysis//spectral/fullrun_pn_xmm0109110101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun  1 04:31:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 04:31:38 2012] Using Nh = 9.5e+20, photon index=2.68, rate=0.0456, arf fullrun_pn_xmm0109110101_pi300-10000_pass1_cl_src1.arf
[Fri Jun  1 04:31:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 04:31:38 2012] Updating source flux to 8.8e-14