[Thu May 31 20:25:23 2012] Detection parameters:
  Position = (316.0, 351.1) = 12 5 13.21 -61 57 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.8 +/- 13.2
  Background counts = 23.4
  Rate = 0.001 +/- 0.0002

[Thu May 31 20:25:24 2012] Off-axis axis estimate = 4.02'
[Thu May 31 22:27:41 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Thu May 31 22:27:41 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Thu May 31 22:27:41 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.840
[Thu May 31 22:27:41 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.44"
[Thu May 31 23:18:25 2012] fullrun_mos2_xmm0109110101_pi300-10000_cl_pass0_src15.ximg exists
[Thu May 31 23:18:25 2012] fullrun_mos2_xmm0109110101_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu May 31 23:18:25 2012] Fit fullrun_mos2_xmm0109110101_pi300-10000_cl_pass0_src15 appears to have run properly
[Thu May 31 23:18:25 2012] fullrun_mos2_xmm0109110101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu May 31 23:18:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109110101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu May 31 23:18:25 2012] fullrun_mos2_xmm0109110101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu May 31 23:18:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109110101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu May 31 23:18:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109110101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109110101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 23:18:49 2012] Warning, spatial fit 15 centroid is now closest to src. 14
[Thu May 31 23:18:49 2012] Vigneting correction estimate = 1.000000
[Thu May 31 23:18:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 23:18:49 2012] Assessing source extent using major
[Thu May 31 23:18:49 2012] Source does appear to be extended
[Thu May 31 23:18:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 01:15:55 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 01:15:55 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Fri Jun  1 01:15:55 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.840
[Fri Jun  1 01:15:55 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 8.44"
[Fri Jun  1 01:50:53 2012] fullrun_mos2_xmm0109110101_pi300-10000_cl_pass1_src14.ximg exists
[Fri Jun  1 01:50:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109110101_pi300-10000_cl_pass1_src14.csv
[Fri Jun  1 01:50:53 2012] fullrun_mos2_xmm0109110101_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Jun  1 01:50:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109110101_pi300-10000_cl_pass1_src14.csv
[Fri Jun  1 01:50:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109110101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109110101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 01:50:53 2012] fullrun_mos2_xmm0109110101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Jun  1 01:50:53 2012] fullrun_mos2_xmm0109110101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Jun  1 01:50:53 2012] Fit fullrun_mos2_xmm0109110101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Jun  1 01:51:17 2012] Spatial fit model total counts = 320.114000, observed total counts = 316.000000
[Fri Jun  1 01:51:17 2012] Offset between fit and detection position for source 13 = 0.243549 pixels
[Fri Jun  1 01:51:17 2012] 312.534600 total counts/ 266.071000 bgd. counts: snr = 2.848486
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.243549 pixels
  Position = (315.8, 351.0) = 12 5 13.36 -61 57 41.5
  Extent = 4.4 (2.7-5.8)", rotation angle = 0
  Source counts = 46.5 +/- 17.7
  Background counts = 266.1
  Rate = 0.0006 +/- 0.0002
[Fri Jun  1 01:51:17 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 01:51:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 01:51:17 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 01:51:17 2012] Source does appear to be extended
[Fri Jun  1 01:51:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 03:55:32 2012] XMMSAS src. selection expression = ellipse(27423.357800, 30488.544600, 262.735808, 262.735808, 0.000000, X, Y)
[Fri Jun  1 03:55:32 2012] Writing source region out to fullrun_mos2_xmm0109110101_pi300-10000_pass1_cl_src13_src.reg
[Fri Jun  1 03:55:32 2012] Extracting stamp from image fullrun_mos2_xmm0109110101_pi300-10000_cl_sm2.00.img.gz, (301, 336) - (331, 366)
[Fri Jun  1 03:55:32 2012] XMMSAS bgd. selection expression = annulus(27423.357800, 30488.544600, 437.893013, 875.786025, X, Y) && !ellipse(26703.563800, 30206.396400, 436.096013, 436.096013, 0.000000, X, Y)
[Fri Jun  1 03:55:32 2012] Writing fullrun_mos2_xmm0109110101_pi300-10000_pass1_cl_src13.gif
[Fri Jun  1 03:59:43 2012] Mean detx,y = (5699.00, -3284.81) 
[Fri Jun  1 03:59:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 03:59:51 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 03:59:52 2012] Setting source spectrum file to fullrun_mos2_xmm0109110101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jun  1 03:59:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109110101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Jun  1 04:25:31 2012] Not generating rmf since there are only 46 counts
[Fri Jun  1 04:25:31 2012] rmf not generated due to insufficient counts
[Fri Jun  1 04:28:49 2012] Updating aperture counts using extracted products
[Fri Jun  1 04:28:49 2012] Error reading totcts from fullrun_mos2_xmm0109110101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jun  1 04:28:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 04:28:49 2012] Using photon index=1.80, rate=0.000613, arf fullrun_mos2_xmm0109110101_pi300-10000_pass1_cl_src13.arf
[Fri Jun  1 04:28:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 04:28:49 2012] Updating source flux to 1.1e-14
[Fri Jun  1 04:29:28 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting