[Thu May 31 20:24:56 2012] Detection parameters:
  Position = (344.6, 311.3) = 12 4 55.50 -62 0 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.1 +/- 13.5
  Background counts = 23.3
  Rate = 0.002 +/- 0.0002

[Thu May 31 20:24:56 2012] Off-axis axis estimate = 3.48'
[Thu May 31 21:42:42 2012] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Thu May 31 21:42:42 2012] Initial guess for spatial extent in simple fitting = 8.17"
[Thu May 31 21:42:42 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.106
[Thu May 31 21:42:42 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.17"
[Thu May 31 22:27:41 2012] fullrun_mos1_xmm0109110101_pi300-10000_cl_pass0_src11.ximg exists
[Thu May 31 22:27:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109110101_pi300-10000_cl_pass0_src11.csv
[Thu May 31 22:27:41 2012] fullrun_mos1_xmm0109110101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May 31 22:27:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109110101_pi300-10000_cl_pass0_src11.csv
[Thu May 31 22:27:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109110101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109110101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 22:27:41 2012] fullrun_mos1_xmm0109110101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May 31 22:27:41 2012] fullrun_mos1_xmm0109110101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May 31 22:27:41 2012] Fit fullrun_mos1_xmm0109110101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu May 31 23:18:43 2012] Spatial fit model total counts = 275.277000, observed total counts = 271.000000
[Thu May 31 23:18:43 2012] Offset between fit and detection position for source 20 = 0.165546 pixels
[Thu May 31 23:18:43 2012] 275.607100 total counts/ 217.952000 bgd. counts: snr = 3.905326
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.165546 pixels
  Position = (344.6, 311.4) = 12 4 55.53 -62 0 33.5
  Extent = 4.4 (3.0-6.3)", rotation angle = 0
  Source counts = 57.7 +/- 16.6
  Background counts = 218.0
  Rate = 0.0008 +/- 0.0002
[Thu May 31 23:18:43 2012] Vigneting correction estimate = 1.000000
[Thu May 31 23:18:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 23:18:43 2012] Assessing source extent using major axis lower bound
[Thu May 31 23:18:43 2012] Source does appear to be extended
[Thu May 31 23:18:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 00:35:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 00:35:00 2012] Initial guess for spatial extent in simple fitting = 4.38"
[Fri Jun  1 00:35:00 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.991
[Fri Jun  1 00:35:00 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 4.38"
[Fri Jun  1 01:15:54 2012] fullrun_mos1_xmm0109110101_pi300-10000_cl_pass1_src11.ximg exists
[Fri Jun  1 01:15:54 2012] fullrun_mos1_xmm0109110101_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Jun  1 01:15:54 2012] Fit fullrun_mos1_xmm0109110101_pi300-10000_cl_pass1_src11 appears to have run properly
[Fri Jun  1 01:15:54 2012] fullrun_mos1_xmm0109110101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Jun  1 01:15:54 2012] fullrun_mos1_xmm0109110101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Jun  1 01:15:54 2012] Fit fullrun_mos1_xmm0109110101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Jun  1 01:51:11 2012] Spatial fit model total counts = 271.901000, observed total counts = 270.000000
[Fri Jun  1 01:51:11 2012] Offset between fit and detection position for source 20 = 0.033787 pixels
[Fri Jun  1 01:51:11 2012] 272.436000 total counts/ 212.969000 bgd. counts: snr = 4.074908
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.033787 pixels
  Position = (344.6, 311.4) = 12 4 55.52 -62 0 33.6
  Extent = 4.6 (3.0-6.4)", rotation angle = 0
  Source counts = 59.5 +/- 16.5
  Background counts = 213.0
  Rate = 0.0008 +/- 0.0002
[Fri Jun  1 01:51:11 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 01:51:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 01:51:11 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 01:51:11 2012] Source does appear to be extended
[Fri Jun  1 01:51:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 03:22:58 2012] XMMSAS src. selection expression = ellipse(29932.347600, 27043.803200, 273.988808, 273.988808, 0.000000, X, Y)
[Fri Jun  1 03:22:58 2012] Writing source region out to fullrun_mos1_xmm0109110101_pi300-10000_pass1_cl_src20_src.reg
[Fri Jun  1 03:22:58 2012] Extracting stamp from image fullrun_mos1_xmm0109110101_pi300-10000_cl_sm2.00.img.gz, (329, 296) - (360, 327)
[Fri Jun  1 03:22:58 2012] XMMSAS bgd. selection expression = annulus(29932.347600, 27043.803200, 456.648013, 913.296026, X, Y)
[Fri Jun  1 03:22:58 2012] Writing fullrun_mos1_xmm0109110101_pi300-10000_pass1_cl_src20.gif
[Fri Jun  1 03:25:26 2012] Mean detx,y = (1068.52, -4731.34) 
[Fri Jun  1 03:25:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 03:25:31 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 03:25:31 2012] Setting source spectrum file to fullrun_mos1_xmm0109110101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Jun  1 03:25:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109110101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri Jun  1 03:52:40 2012] Not generating rmf since there are only 59 counts
[Fri Jun  1 03:52:40 2012] rmf not generated due to insufficient counts
[Fri Jun  1 04:28:48 2012] Updating aperture counts using extracted products
[Fri Jun  1 04:28:48 2012] Error reading totcts from fullrun_mos1_xmm0109110101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Jun  1 04:28:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 04:28:48 2012] Using photon index=1.80, rate=0.000784, arf fullrun_mos1_xmm0109110101_pi300-10000_pass1_cl_src20.arf
[Fri Jun  1 04:28:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 04:28:48 2012] Updating source flux to 1.3e-14
[Fri Jun  1 04:28:51 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting