[Sat Jun  1 16:44:40 2013] Detection parameters:
  Position = (284.9, 397.1) = 13 27 6.73 -61 56 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20.4 +/- 6.3
  Background counts = 4.0
  Rate = 0.003 +/- 0.0008

[Sat Jun  1 16:44:40 2013] Off-axis axis estimate = 7.22'
[Sat Jun  1 16:45:45 2013] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 16:45:45 2013] Initial guess for spatial extent in simple fitting = 10.04"
[Sat Jun  1 16:45:45 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.142
[Sat Jun  1 16:45:45 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 10.04"
[Sat Jun  1 16:45:47 2013] fullrun_mos1_xmm0109100201_pi300-10000_cl_pass0_src27.ximg exists
[Sat Jun  1 16:45:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109100201_pi300-10000_cl_pass0_src27.csv
[Sat Jun  1 16:45:47 2013] fullrun_mos1_xmm0109100201_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Jun  1 16:45:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109100201_pi300-10000_cl_pass0_src27.csv
[Sat Jun  1 16:45:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109100201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109100201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 16:45:48 2013] fullrun_mos1_xmm0109100201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Jun  1 16:45:48 2013] fullrun_mos1_xmm0109100201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Jun  1 16:45:48 2013] Fit fullrun_mos1_xmm0109100201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Jun  1 16:46:23 2013] Spatial fit model total counts = 91.399700, observed total counts = 88.000000
[Sat Jun  1 16:46:23 2013] Offset between fit and detection position for source 31 = 4.391588 pixels
[Sat Jun  1 16:46:23 2013] 84.799200 total counts/ 13.885000 bgd. counts: snr = 19.030941
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 4.391588 pixels
  Position = (288.3, 399.9) = 13 27 4.63 -61 56 8.5
  Extent = 20.1 (5.7-40.2)", rotation angle = 0
  Source counts = 70.9 +/- 9.2
  Background counts = 13.9
  Rate = 0.007 +/- 0.0009
[Sat Jun  1 16:46:23 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 16:46:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 16:46:23 2013] Assessing source extent using major axis lower bound
[Sat Jun  1 16:46:23 2013] Source does appear to be extended
[Sat Jun  1 16:46:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 16:47:18 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  1 16:47:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  1 16:47:18 2013] Initial guess for spatial extent in simple fitting = 20.08"
[Sat Jun  1 16:47:18 2013] source mask rpix=4.6, npix_max = 104, mask sum = 94, frac = 0.898
[Sat Jun  1 16:47:18 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 20.08"
[Sat Jun  1 16:47:19 2013] fullrun_mos1_xmm0109100201_pi300-10000_cl_pass1_src20.ximg exists
[Sat Jun  1 16:47:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109100201_pi300-10000_cl_pass1_src20.csv
[Sat Jun  1 16:47:19 2013] fullrun_mos1_xmm0109100201_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Jun  1 16:47:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109100201_pi300-10000_cl_pass1_src20.csv
[Sat Jun  1 16:47:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109100201_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109100201_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 16:47:19 2013] fullrun_mos1_xmm0109100201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Jun  1 16:47:19 2013] fullrun_mos1_xmm0109100201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Jun  1 16:47:19 2013] Fit fullrun_mos1_xmm0109100201_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sat Jun  1 16:47:45 2013] Warning, spatial fit 20 centroid is now closest to src. 12
[Sat Jun  1 16:47:45 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 16:47:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 16:47:45 2013] Assessing source extent using major axis lower bound
[Sat Jun  1 16:47:45 2013] Source does appear to be extended
[Sat Jun  1 16:47:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 16:48:39 2013] XMMSAS src. selection expression = ellipse(25037.926000, 34740.166800, 1204.602035, 1204.602035, 0.000000, X, Y)
[Sat Jun  1 16:48:39 2013] Not overwriting source region fullrun_mos1_xmm0109100201_pi300-10000_pass1_cl_src31_src.reg
[Sat Jun  1 16:48:39 2013] Extracting stamp from image fullrun_mos1_xmm0109100201_pi300-10000_cl_sm2.00.img.gz, (219, 331) - (358, 469)
[Sat Jun  1 16:48:39 2013] XMMSAS bgd. selection expression = annulus(25037.926000, 34740.166800, 2007.670058, 4015.340116, X, Y) && !ellipse(20454.890360, 31363.767800, 1166.536034, 1166.536034, 0.000000, X, Y)
[Sat Jun  1 16:48:39 2013] Writing fullrun_mos1_xmm0109100201_pi300-10000_pass1_cl_src31.gif
[Sat Jun  1 16:55:38 2013] Mean detx,y = (5788.70, 3403.35) 
[Sat Jun  1 16:55:40 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 16:56:59 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 16:57:00 2013] Setting source spectrum file to fullrun_mos1_xmm0109100201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Jun  1 16:57:00 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109100201_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat Jun  1 17:25:35 2013] Not generating rmf since there are only 70 counts
[Sat Jun  1 17:25:35 2013] rmf not generated due to insufficient counts
[Sat Jun  1 17:27:22 2013] Updating aperture counts using extracted products
[Sat Jun  1 17:27:22 2013] Total counts from fullrun_mos1_xmm0109100201_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 193.00
[Sat Jun  1 17:27:22 2013] Total counts from fullrun_mos1_xmm0109100201_pi300-10000_pass1_cl_src31_bgd.pi.gz = 1076.00
[Sat Jun  1 17:27:22 2013] Got source and background scale factors 4198741.000000, 33735743.000000
[Sat Jun  1 17:27:23 2013] User source parameters:
  Position = (288.3, 399.9) = 13 27 4.63 -61 56 8.5
  Extent = 20.1 (5.7-40.2)", rotation angle = 0
  Source aperture counts = 59.1 +/- 14.9
  Background aperture counts = 133.9
  Rate = 0.006 +/- 0.002

[Sat Jun  1 17:27:24 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 17:27:24 2013] Using photon index=1.80, rate=0.00714, arf fullrun_mos1_xmm0109100201_pi300-10000_pass1_cl_src31.arf
[Sat Jun  1 17:27:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 17:27:24 2013] Updating source flux to 1.4e-13
[Sat Jun  1 17:27:34 2013] Source 31 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  1 17:27:44 2013] xmm0109100201/analysis//spectral/fullrun_mos1_xmm0109100201_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete