[Tue Mar  6 02:16:19 2012] Detection parameters:
  Position = (411.5, 231.7) = 5 37 47.76 -64 8 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 208.4 +/- 19.3
  Background counts = 22.8
  Rate = 0.01 +/- 0.001

[Tue Mar  6 02:16:20 2012] Off-axis axis estimate = 9.52'
[Tue Mar  6 04:19:59 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 04:19:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar  6 04:19:59 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Tue Mar  6 04:19:59 2012] source mask rpix=2.6, npix_max = 37, mask sum = 33, frac = 0.874
[Tue Mar  6 04:19:59 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.19"
[Tue Mar  6 07:19:26 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src5.ximg exists
[Tue Mar  6 07:19:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src5.csv
[Tue Mar  6 07:19:26 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Mar  6 07:19:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src5.csv
[Tue Mar  6 07:19:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Mar  6 07:19:27 2012] Fit fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Mar  6 07:19:41 2012] Warning, spatial fit 5 centroid is now closest to src. 8
[Tue Mar  6 07:19:41 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 17.347902 pixels away
[Tue Mar  6 07:19:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 07:19:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 07:19:41 2012] Assessing source extent using major
[Tue Mar  6 07:19:41 2012] Source does appear to be extended
[Tue Mar  6 07:19:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 07:19:41 2012] Source is confused with source 9
[Tue Mar  6 10:19:56 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 10:19:56 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Tue Mar  6 10:19:56 2012] source mask rpix=2.6, npix_max = 37, mask sum = 33, frac = 0.874
[Tue Mar  6 10:19:56 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.19"
[Tue Mar  6 14:48:35 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src5.ximg exists
[Tue Mar  6 14:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src5.csv
[Tue Mar  6 14:48:35 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Mar  6 14:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src5.csv
[Tue Mar  6 14:48:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 14:48:36 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Mar  6 14:48:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Mar  6 14:48:36 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Mar  6 14:48:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Mar  6 14:48:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 14:48:54 2012] Warning, spatial fit 5 centroid is now closest to src. 6
[Tue Mar  6 14:48:54 2012] Spatial fit model total counts = 890.477000, observed total counts = 864.000000
[Tue Mar  6 14:48:54 2012] Offset between fit and detection position for source 7 = 5.675814 pixels
[Tue Mar  6 14:48:54 2012] Warning, changing simple spatial fit ID from 5 to 6
[Tue Mar  6 14:48:54 2012] 896.127200 total counts/ 14.915200 bgd. counts: snr = 228.173846
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 5.675814 pixels
  Position = (416.9, 230.1) = 5 37 44.15 -64 8 31.0
  Extent = 26.5 (26.4-52.9)", rotation angle = 0
  Source counts = 881.2 +/- 29.9
  Background counts = 14.9
  Rate = 0.04 +/- 0.001
[Tue Mar  6 14:48:54 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 14:48:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 14:48:54 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 14:48:54 2012] Source does appear to be extended
[Tue Mar  6 14:48:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 16:28:01 2012] XMMSAS src. selection expression = ellipse(36223.912000, 19968.042000, 1587.288046, 1587.288046, 0.000000, X, Y)
[Tue Mar  6 16:28:01 2012] Writing source region out to fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src7_src.reg
[Tue Mar  6 16:28:01 2012] Extracting stamp from image fullrun_mos2_xmm0109090101_pi300-10000_cl_sm2.00.img.gz, (326, 139) - (508, 321)
[Tue Mar  6 16:28:01 2012] XMMSAS bgd. selection expression = annulus(36223.912000, 19968.042000, 2645.480076, 5290.960152, X, Y) && !ellipse(34464.892000, 20718.187800, 1731.288050, 1731.288050, 0.000000, X, Y) && !ellipse(36778.156400, 19690.728200, 1789.968052, 326.417609, 25.790000, X, Y) && !ellipse(33551.398000, 21334.932000, 1398.328040, 1398.328040, 0.000000, X, Y) && !ellipse(39289.133575, 18576.496002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40549.582000, 17983.518000, 2091.576060, 2091.576060, 0.000000, X, Y) && !ellipse(40240.740000, 18153.362000, 2164.904062, 2164.904062, 0.000000, X, Y) && !ellipse(34011.280000, 20960.820000, 1698.968049, 1698.968049, 0.000000, X, Y) && !ellipse(39789.398000, 18403.404000, 1909.152055, 1909.152055, 0.000000, X, Y) && !ellipse(34930.589691, 20453.199478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37315.786028, 19455.836453, 1192.800034, 312.253875, 22.467256, X, Y) && !ellipse(37934.477539, 19207.603211, 1466.904042, 836.975982, 0.000000, X, Y) && !ellipse(42014.863647, 17420.804230, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar  6 16:28:01 2012] Writing fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src7.gif
[Tue Mar  6 17:00:24 2012] Mean detx,y = (-141.46, 10214.50) 
[Tue Mar  6 17:00:26 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar  6 17:01:30 2012] Binned source spectrum to 10 counts/bin
[Tue Mar  6 17:01:31 2012] Setting source spectrum file to fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Mar  6 17:01:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Mar  6 21:11:17 2012] Updating aperture counts using extracted products
[Tue Mar  6 21:11:17 2012] Error reading totcts from fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Mar  6 21:11:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar  6 21:11:18 2012] Using photon index=1.80, rate=0.0441, arf fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src7.arf
[Tue Mar  6 21:11:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar  6 21:11:18 2012] Updating source flux to 8.1e-13
[Tue Mar  6 21:15:26 2012] Flag c found in src. 7 procflags, skipping spectral fitting