[Tue Mar  6 02:16:20 2012] Detection parameters:
  Position = (396.7, 237.6) = 5 37 57.60 -64 7 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.9 +/- 16.1
  Background counts = 24.2
  Rate = 0.01 +/- 0.002

[Tue Mar  6 02:16:20 2012] Off-axis axis estimate = 8.38'
[Tue Mar  6 04:19:59 2012] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 04:19:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar  6 04:19:59 2012] Initial guess for spatial extent in simple fitting = 10.62"
[Tue Mar  6 04:19:59 2012] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.838
[Tue Mar  6 04:19:59 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.62"
[Tue Mar  6 07:19:26 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src4.ximg exists
[Tue Mar  6 07:19:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src4.csv
[Tue Mar  6 07:19:26 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Mar  6 07:19:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src4.csv
[Tue Mar  6 07:19:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Mar  6 07:19:27 2012] Fit fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Mar  6 07:19:41 2012] Warning, spatial fit 4 centroid is now closest to src. 4
[Tue Mar  6 07:19:41 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 13.996785 pixels away
[Tue Mar  6 07:19:41 2012] Spatial fit model total counts = 576.705000, observed total counts = 569.000000
[Tue Mar  6 07:19:41 2012] Offset between fit and detection position for source 29 = 1.097754 pixels
[Tue Mar  6 07:19:41 2012] Warning, changing simple spatial fit ID from 4 to 15
[Tue Mar  6 07:19:41 2012] 590.307200 total counts/ 26.291200 bgd. counts: snr = 109.998362
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.097754 pixels
  Position = (396.7, 238.7) = 5 37 57.61 -64 7 54.0
  Extent = 21.6 (21.5-43.3)", rotation angle = 0
  Source counts = 564.0 +/- 24.3
  Background counts = 26.3
  Rate = 0.03 +/- 0.001
[Tue Mar  6 07:19:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 07:19:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 07:19:41 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 07:19:41 2012] Source does appear to be extended
[Tue Mar  6 07:19:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 07:19:41 2012] Source is confused with source 3
[Tue Mar  6 07:19:41 2012] Source is confused with source 4
[Tue Mar  6 07:19:41 2012] Source is confused with source 6
[Tue Mar  6 10:19:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar  6 10:19:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar  6 10:19:56 2012] Initial guess for spatial extent in simple fitting = 21.64"
[Tue Mar  6 10:19:56 2012] source mask rpix=5.0, npix_max = 119, mask sum = 86, frac = 0.717
[Tue Mar  6 10:19:56 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 21.64"
[Tue Mar  6 14:48:35 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src4.ximg exists
[Tue Mar  6 14:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src4.csv
[Tue Mar  6 14:48:35 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Mar  6 14:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src4.csv
[Tue Mar  6 14:48:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 14:48:36 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Mar  6 14:48:36 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Mar  6 14:48:36 2012] Fit fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Mar  6 14:48:54 2012] Warning, spatial fit 4 centroid is now closest to src. 3
[Tue Mar  6 14:48:54 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 14:48:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 14:48:54 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 14:48:54 2012] Source does appear to be extended
[Tue Mar  6 14:48:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 16:28:01 2012] XMMSAS src. selection expression = ellipse(34464.892000, 20718.187800, 1298.466037, 1298.466037, 0.000000, X, Y)
[Tue Mar  6 16:28:01 2012] Writing source region out to fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src29_src.reg
[Tue Mar  6 16:28:01 2012] Extracting stamp from image fullrun_mos2_xmm0109090101_pi300-10000_cl_sm2.00.img.gz, (322, 164) - (471, 313)
[Tue Mar  6 16:28:01 2012] XMMSAS bgd. selection expression = annulus(34464.892000, 20718.187800, 2164.110062, 4328.220125, X, Y) && !ellipse(36223.912000, 19968.042000, 2116.384061, 2116.384061, 0.000000, X, Y) && !ellipse(36778.156400, 19690.728200, 1789.968052, 326.417609, 25.790000, X, Y) && !ellipse(33551.398000, 21334.932000, 1398.328040, 1398.328040, 0.000000, X, Y) && !ellipse(39289.133575, 18576.496002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40549.582000, 17983.518000, 2091.576060, 2091.576060, 0.000000, X, Y) && !ellipse(40240.740000, 18153.362000, 2164.904062, 2164.904062, 0.000000, X, Y) && !ellipse(34011.280000, 20960.820000, 1698.968049, 1698.968049, 0.000000, X, Y) && !ellipse(39789.398000, 18403.404000, 1909.152055, 1909.152055, 0.000000, X, Y) && !ellipse(34930.589691, 20453.199478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37315.786028, 19455.836453, 1192.800034, 312.253875, 22.467256, X, Y) && !ellipse(37934.477539, 19207.603211, 1466.904042, 836.975982, 0.000000, X, Y)
[Tue Mar  6 16:28:01 2012] Writing fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src29.gif
[Tue Mar  6 16:59:24 2012] Mean detx,y = (-117.12, 8269.54) 
[Tue Mar  6 16:59:26 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar  6 17:00:06 2012] Binned source spectrum to 10 counts/bin
[Tue Mar  6 17:00:07 2012] Setting source spectrum file to fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Mar  6 17:00:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue Mar  6 21:11:17 2012] Updating aperture counts using extracted products
[Tue Mar  6 21:11:17 2012] Error reading totcts from fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Mar  6 21:11:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar  6 21:11:18 2012] Using photon index=1.80, rate=0.0282, arf fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src29.arf
[Tue Mar  6 21:11:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar  6 21:11:18 2012] Updating source flux to 4.8e-13
[Tue Mar  6 21:15:26 2012] Flag c found in src. 29 procflags, skipping spectral fitting