[Tue Mar  6 02:16:20 2012] Detection parameters:
  Position = (234.6, 306.2) = 5 39 45.21 -64 3 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.1 +/- 10.7
  Background counts = 50.4
  Rate = 0.004 +/- 0.0008

[Tue Mar  6 02:16:20 2012] Off-axis axis estimate = 4.66'
[Tue Mar  6 04:19:59 2012] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 04:19:59 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Tue Mar  6 04:19:59 2012] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.752
[Tue Mar  6 04:19:59 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 8.76"
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src24.ximg exists
[Tue Mar  6 07:19:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src24.csv
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src24_1.ximg exists
[Tue Mar  6 07:19:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src24.csv
[Tue Mar  6 07:19:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Tue Mar  6 07:19:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Tue Mar  6 07:19:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Tue Mar  6 07:19:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 07:19:41 2012] Spatial fit model total counts = 671.617000, observed total counts = 453.000000
[Tue Mar  6 07:19:41 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar  6 07:19:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 07:19:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 07:19:41 2012] Assessing source extent using major
[Tue Mar  6 07:19:41 2012] Source does appear to be extended
[Tue Mar  6 07:19:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 07:19:41 2012] Deleting source due to low Poisson probability 0.8