[Tue Mar  6 02:16:20 2012] Detection parameters:
  Position = (224.1, 312.1) = 5 39 52.18 -64 2 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.5 +/- 12.5
  Background counts = 43.9
  Rate = 0.007 +/- 0.001

[Tue Mar  6 02:16:20 2012] Off-axis axis estimate = 5.48'
[Tue Mar  6 04:19:59 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 04:19:59 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Tue Mar  6 04:19:59 2012] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.066
[Tue Mar  6 04:19:59 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.17"
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src18.ximg exists
[Tue Mar  6 07:19:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src18.csv
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Mar  6 07:19:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src18.csv
[Tue Mar  6 07:19:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Mar  6 07:19:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Mar  6 07:19:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Tue Mar  6 07:19:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 07:19:41 2012] Source 25 is offset by -0.226571 and -3.080115 pixels which is larger than
2 X fitted extent = 2.520901 x 1.634998, not incorporating fit results
[Tue Mar  6 07:19:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 07:19:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 07:19:41 2012] Assessing source extent using major
[Tue Mar  6 07:19:41 2012] Source does appear to be extended
[Tue Mar  6 07:19:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 07:19:41 2012] Deleting source due to low Poisson probability 0.9