[Tue Mar  6 02:16:19 2012] Detection parameters:
  Position = (307.2, 278.0) = 5 38 57.10 -64 5 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1123212.8 +/- 1073.4
  Background counts = 46.0
  Rate = 6e+01 +/- 0.06

[Tue Mar  6 02:16:20 2012] Off-axis axis estimate = 1.61'
[Tue Mar  6 04:19:59 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 04:19:59 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Tue Mar  6 04:19:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Tue Mar  6 04:19:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Tue Mar  6 07:19:26 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar  6 07:19:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src1.csv
[Tue Mar  6 07:19:26 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar  6 07:19:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src1.csv
[Tue Mar  6 07:19:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar  6 07:19:27 2012] Fit fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar  6 07:19:41 2012] Spatial fit model total counts = 1461170.000000, observed total counts = 1335120.000000
[Tue Mar  6 07:19:41 2012] Offset between fit and detection position for source 18 = 0.619320 pixels
[Tue Mar  6 07:19:41 2012] 1452650.000000 total counts/ 25600.000000 bgd. counts: snr = 8919.062500
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.619320 pixels
  Position = (307.6, 277.4) = 5 38 56.88 -64 5 6.3
  Extent = 12.4 (12.4-12.4)", rotation angle = 0
  Source counts = 1427050.0 +/- 1205.3
  Background counts = 25600.0
  Rate = 7e+01 +/- 0.06
[Tue Mar  6 07:19:41 2012] Spatial fit model total counts = 1022920.000000, observed total counts = 735281.000000
[Tue Mar  6 07:19:41 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar  6 07:19:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 07:19:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 07:19:41 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 07:19:41 2012] Source does appear to be extended
[Tue Mar  6 07:19:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 07:19:41 2012] Source is confused with source 2
[Tue Mar  6 10:19:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar  6 10:19:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar  6 10:19:56 2012] Initial guess for spatial extent in simple fitting = 12.39"
[Tue Mar  6 10:19:56 2012] source mask rpix=2.8, npix_max = 44, mask sum = 41, frac = 0.915
[Tue Mar  6 10:19:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.39"
[Tue Mar  6 14:48:35 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar  6 14:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src1.csv
[Tue Mar  6 14:48:35 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar  6 14:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src1.csv
[Tue Mar  6 14:48:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 14:48:36 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar  6 14:48:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar  6 14:48:36 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar  6 14:48:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar  6 14:48:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 14:48:54 2012] Spatial fit model total counts = 1660690.000000, observed total counts = 1442663.000000
[Tue Mar  6 14:48:54 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar  6 14:48:54 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 14:48:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 14:48:54 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 14:48:54 2012] Source does appear to be extended
[Tue Mar  6 14:48:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 16:28:01 2012] Counts = 1427050.000000, rescaling region sizes by 3.000000
[Tue Mar  6 16:28:01 2012] XMMSAS src. selection expression = ellipse(26708.756800, 24089.500000, 2229.408064, 2229.408064, 0.000000, X, Y)
[Tue Mar  6 16:28:01 2012] Writing source region out to fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src18_src.reg
[Tue Mar  6 16:28:01 2012] Extracting stamp from image fullrun_mos2_xmm0109090101_pi300-10000_cl_sm2.00.img.gz, (179, 149) - (436, 406)
[Tue Mar  6 16:28:01 2012] XMMSAS bgd. selection expression = annulus(26708.756800, 24089.500000, 11147.040321, 22294.080642, X, Y) && !ellipse(26309.372375, 23483.821167, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27349.567719, 23102.582855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34464.892000, 20718.187800, 1731.288050, 1731.288050, 0.000000, X, Y) && !ellipse(36223.912000, 19968.042000, 2116.384061, 2116.384061, 0.000000, X, Y) && !ellipse(36778.156400, 19690.728200, 1789.968052, 326.417609, 25.790000, X, Y) && !ellipse(33551.398000, 21334.932000, 1398.328040, 1398.328040, 0.000000, X, Y) && !ellipse(39289.133575, 18576.496002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40549.582000, 17983.518000, 2091.576060, 2091.576060, 0.000000, X, Y) && !ellipse(40240.740000, 18153.362000, 2164.904062, 2164.904062, 0.000000, X, Y) && !ellipse(34011.280000, 20960.820000, 1698.968049, 1698.968049, 0.000000, X, Y) && !ellipse(39789.398000, 18403.404000, 1909.152055, 1909.152055, 0.000000, X, Y) && !ellipse(34930.589691, 20453.199478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37315.786028, 19455.836453, 1192.800034, 312.253875, 22.467256, X, Y) && !ellipse(37934.477539, 19207.603211, 1466.904042, 836.975982, 0.000000, X, Y) && !ellipse(31686.515800, 12822.178600, 547.514416, 547.514416, 0.000000, X, Y) && !ellipse(42014.863647, 17420.804230, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar  6 16:28:01 2012] Writing fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src18.gif
[Tue Mar  6 16:29:58 2012] Mean detx,y = (-105.30, -163.12) 
[Tue Mar  6 16:30:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar  6 16:42:27 2012] Binned source spectrum to 10 counts/bin
[Tue Mar  6 16:42:27 2012] Setting source spectrum file to fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Mar  6 16:42:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue Mar  6 21:11:17 2012] Updating aperture counts using extracted products
[Tue Mar  6 21:11:17 2012] Error reading totcts from fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Mar  6 21:11:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar  6 21:11:18 2012] Using photon index=1.80, rate=71.4, arf fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src18.arf
[Tue Mar  6 21:11:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar  6 21:11:18 2012] Updating source flux to 7.4e-10
[Tue Mar  6 21:15:26 2012] Flag p found in src. 18 procflags, skipping spectral fitting
[Tue Mar  6 21:15:26 2012] Flag c found in src. 18 procflags, skipping spectral fitting
[Tue Mar  6 21:18:04 2012] Reading fit data from xmm0109090101/analysis//spectral/fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src18_pl.csv
[Tue Mar  6 21:18:04 2012] Spectral fit parameter nH value = 1.43989e+21
[Tue Mar  6 21:18:04 2012] Spectral fit parameter PhoIndex value = 1.8268
[Tue Mar  6 21:18:04 2012] Failed to get F(0.3-8.0) from xmm0109090101/analysis//spectral/fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src18_pl.csv, possibly due to different flux energy range selected
[Tue Mar  6 21:18:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar  6 21:18:04 2012] Using Nh = 1.4e+21, photon index=1.83, rate=71.4, arf fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src18.arf
[Tue Mar  6 21:18:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar  6 21:18:04 2012] Updating source flux to 8.3e-10