[Tue Mar  6 02:16:19 2012] Detection parameters:
  Position = (471.2, 206.0) = 5 37 7.96 -64 10 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.7 +/- 18.4
  Background counts = 12.8
  Rate = 0.008 +/- 0.0009

[Tue Mar  6 02:16:20 2012] Off-axis axis estimate = 14.20'
[Tue Mar  6 04:19:59 2012] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 04:19:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar  6 04:19:59 2012] Initial guess for spatial extent in simple fitting = 13.53"
[Tue Mar  6 04:19:59 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.940
[Tue Mar  6 04:19:59 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.53"
[Tue Mar  6 07:19:26 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src10.ximg exists
[Tue Mar  6 07:19:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src10.csv
[Tue Mar  6 07:19:26 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Mar  6 07:19:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src10.csv
[Tue Mar  6 07:19:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Mar  6 07:19:27 2012] Fit fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Mar  6 07:19:41 2012] Warning, spatial fit 10 centroid is now closest to src. 17
[Tue Mar  6 07:19:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 07:19:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 07:19:41 2012] Assessing source extent using major
[Tue Mar  6 07:19:41 2012] Source does appear to be extended
[Tue Mar  6 07:19:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 07:19:41 2012] Source is confused with source 15
[Tue Mar  6 10:19:56 2012] Using EEF radius (= 13.53 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 10:19:56 2012] Initial guess for spatial extent in simple fitting = 13.53"
[Tue Mar  6 10:19:56 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.940
[Tue Mar  6 10:19:56 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 13.53"
[Tue Mar  6 14:48:35 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src9.ximg exists
[Tue Mar  6 14:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src9.csv
[Tue Mar  6 14:48:35 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Mar  6 14:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src9.csv
[Tue Mar  6 14:48:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 14:48:36 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Mar  6 14:48:36 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Mar  6 14:48:36 2012] Fit fullrun_mos2_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Mar  6 14:48:54 2012] Warning, spatial fit 9 centroid is now closest to src. 15
[Tue Mar  6 14:48:54 2012] Spatial fit model total counts = 673.614000, observed total counts = 635.000000
[Tue Mar  6 14:48:54 2012] Offset between fit and detection position for source 16 = 4.704981 pixels
[Tue Mar  6 14:48:54 2012] Warning, changing simple spatial fit ID from 9 to 12
[Tue Mar  6 14:48:54 2012] 662.641200 total counts/ 51.579200 bgd. counts: snr = 85.084015
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 4.704981 pixels
  Position = (466.6, 207.3) = 5 37 10.98 -64 10 8.9
  Extent = 26.1 (26.1-52.3)", rotation angle = 0
  Source counts = 611.1 +/- 25.7
  Background counts = 51.6
  Rate = 0.03 +/- 0.001
[Tue Mar  6 14:48:54 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 14:48:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 14:48:54 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 14:48:54 2012] Source does appear to be extended
[Tue Mar  6 14:48:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 16:28:01 2012] XMMSAS src. selection expression = ellipse(40549.582000, 17983.518000, 1568.682045, 1568.682045, 0.000000, X, Y)
[Tue Mar  6 16:28:01 2012] Writing source region out to fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src16_src.reg
[Tue Mar  6 16:28:01 2012] Extracting stamp from image fullrun_mos2_xmm0109090101_pi300-10000_cl_sm2.00.img.gz, (376, 117) - (557, 297)
[Tue Mar  6 16:28:01 2012] XMMSAS bgd. selection expression = annulus(40549.582000, 17983.518000, 2614.470075, 5228.940150, X, Y) && !ellipse(34464.892000, 20718.187800, 1731.288050, 1731.288050, 0.000000, X, Y) && !ellipse(36223.912000, 19968.042000, 2116.384061, 2116.384061, 0.000000, X, Y) && !ellipse(36778.156400, 19690.728200, 1789.968052, 326.417609, 25.790000, X, Y) && !ellipse(39289.133575, 18576.496002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40240.740000, 18153.362000, 2164.904062, 2164.904062, 0.000000, X, Y) && !ellipse(34011.280000, 20960.820000, 1698.968049, 1698.968049, 0.000000, X, Y) && !ellipse(39789.398000, 18403.404000, 1909.152055, 1909.152055, 0.000000, X, Y) && !ellipse(34930.589691, 20453.199478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37315.786028, 19455.836453, 1192.800034, 312.253875, 22.467256, X, Y) && !ellipse(37934.477539, 19207.603211, 1466.904042, 836.975982, 0.000000, X, Y) && !ellipse(42014.863647, 17420.804230, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar  6 16:28:01 2012] Writing fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src16.gif
[Tue Mar  6 17:03:56 2012] Mean detx,y = (-167.14, 14890.02) 
[Tue Mar  6 17:03:58 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar  6 17:04:59 2012] Binned source spectrum to 10 counts/bin
[Tue Mar  6 17:04:59 2012] Setting source spectrum file to fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Mar  6 17:04:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Mar  6 21:11:17 2012] Updating aperture counts using extracted products
[Tue Mar  6 21:11:17 2012] Error reading totcts from fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Mar  6 21:11:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar  6 21:11:18 2012] Using photon index=1.80, rate=0.0306, arf fullrun_mos2_xmm0109090101_pi300-10000_pass1_cl_src16.arf
[Tue Mar  6 21:11:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar  6 21:11:18 2012] Updating source flux to 8.1e-13
[Tue Mar  6 21:15:26 2012] Flag c found in src. 16 procflags, skipping spectral fitting