[Tue Mar  6 02:16:19 2012] Detection parameters:
  Position = (443.3, 218.6) = 5 37 26.55 -64 9 17.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.1 +/- 19.2
  Background counts = 17.2
  Rate = 0.009 +/- 0.001

[Tue Mar  6 02:16:20 2012] Off-axis axis estimate = 11.99'
[Tue Mar  6 04:19:59 2012] Using EEF radius (= 12.43 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 04:19:59 2012] Initial guess for spatial extent in simple fitting = 12.43"
[Tue Mar  6 04:19:59 2012] source mask rpix=2.9, npix_max = 45, mask sum = 44, frac = 0.976
[Tue Mar  6 04:19:59 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.43"
[Tue Mar  6 07:19:26 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src9.ximg exists
[Tue Mar  6 07:19:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src9.csv
[Tue Mar  6 07:19:26 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Mar  6 07:19:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src9.csv
[Tue Mar  6 07:19:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Mar  6 07:19:27 2012] fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Mar  6 07:19:27 2012] Fit fullrun_mos2_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Mar  6 07:19:41 2012] Warning, spatial fit 9 centroid is now closest to src. 31
[Tue Mar  6 07:19:41 2012] Spatial fit model total counts = 639.788000, observed total counts = 614.000000
[Tue Mar  6 07:19:41 2012] Offset between fit and detection position for source 11 = 1.383691 pixels
[Tue Mar  6 07:19:41 2012] Warning, changing simple spatial fit ID from 9 to 19
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.383691 pixels
  Position = (444.4, 217.7) = 5 37 25.83 -64 9 24.1
  Extent = 24.5 (24.4-48.9)", rotation angle = 0
  Source counts = 611.0 +/- 24.7
  Background counts = 0.0
  Rate = 0.03 +/- 0.001
 Deleting source due to low signal-to-noise ratio