[Tue Mar  6 02:16:17 2012] Detection parameters:
  Position = (417.4, 230.2) = 5 37 43.83 -64 8 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.2 +/- 16.0
  Background counts = 22.5
  Rate = 0.01 +/- 0.001

[Tue Mar  6 02:16:18 2012] Off-axis axis estimate = 9.94'
[Tue Mar  6 02:19:14 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Tue Mar  6 02:19:14 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Tue Mar  6 02:19:14 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.078
[Tue Mar  6 02:19:14 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.40"
[Tue Mar  6 04:19:58 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Mar  6 04:19:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_src3.csv
[Tue Mar  6 04:19:58 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Mar  6 04:19:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_src3.csv
[Tue Mar  6 04:19:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar  6 04:19:58 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Mar  6 04:19:58 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Mar  6 04:19:58 2012] Fit fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Mar  6 07:19:35 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.128447 pixels away
[Tue Mar  6 07:19:35 2012] Spatial fit model total counts = 675.571000, observed total counts = 675.000000
[Tue Mar  6 07:19:35 2012] Offset between fit and detection position for source 3 = 2.346928 pixels
[Tue Mar  6 07:19:35 2012] Warning, changing simple spatial fit ID from 3 to 26
[Tue Mar  6 07:19:35 2012] 602.461000 total counts/ 380.748000 bgd. counts: snr = 11.362459
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.346928 pixels
  Position = (419.7, 229.6) = 5 37 42.33 -64 8 33.1
  Extent = 23.6 (21.1-47.2)" x 7.3 (5.9-9.1)", rotation angle = 26 (20-31) degrees
  Source counts = 221.7 +/- 24.5
  Background counts = 380.7
  Rate = 0.01 +/- 0.001
[Tue Mar  6 07:19:35 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 07:19:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 07:19:35 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 07:19:35 2012] Source does appear to be extended
[Tue Mar  6 07:19:35 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.32
[Tue Mar  6 07:19:35 2012] Source is asymmetric
[Tue Mar  6 07:19:35 2012] Source is confused with source 23
[Tue Mar  6 07:19:35 2012] Source is confused with source 25
[Tue Mar  6 07:19:35 2012] Source is confused with source 26
[Tue Mar  6 07:19:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar  6 07:19:47 2012] Initial guess for spatial extent in simple fitting = 15.44"
[Tue Mar  6 07:19:47 2012] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.976
[Tue Mar  6 07:19:47 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 15.44"
[Tue Mar  6 10:19:55 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Mar  6 10:19:55 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Mar  6 10:19:55 2012] Fit fullrun_mos1_xmm0109090101_pi300-10000_cl_pass1_src3 appears to have run properly
[Tue Mar  6 10:19:55 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Mar  6 10:19:55 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Mar  6 10:19:55 2012] Fit fullrun_mos1_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Mar  6 14:48:47 2012] Warning, spatial fit 3 centroid is now closest to src. 25
[Tue Mar  6 14:48:47 2012] Spatial fit model total counts = 680.363000, observed total counts = 675.000000
[Tue Mar  6 14:48:47 2012] Offset between fit and detection position for source 3 = 0.206647 pixels
[Tue Mar  6 14:48:47 2012] Warning, changing simple spatial fit ID from 3 to 22
[Tue Mar  6 14:48:47 2012] 602.995000 total counts/ 323.827000 bgd. counts: snr = 15.513476
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.206647 pixels
  Position = (419.8, 229.4) = 5 37 42.24 -64 8 33.8
  Extent = 15.9 (11.5-20.6)", rotation angle = 0
  Source counts = 279.2 +/- 24.6
  Background counts = 323.8
  Rate = 0.01 +/- 0.001
[Tue Mar  6 14:48:47 2012] Vigneting correction estimate = 1.000000
[Tue Mar  6 14:48:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar  6 14:48:47 2012] Assessing source extent using major axis lower bound
[Tue Mar  6 14:48:47 2012] Source does appear to be extended
[Tue Mar  6 14:48:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar  6 14:49:02 2012] XMMSAS src. selection expression = ellipse(36472.616000, 19911.698000, 955.950028, 955.950028, 0.000000, X, Y)
[Tue Mar  6 14:49:02 2012] Writing source region out to fullrun_mos1_xmm0109090101_pi300-10000_pass1_cl_src3_src.reg
[Tue Mar  6 14:49:02 2012] Extracting stamp from image fullrun_mos1_xmm0109090101_pi300-10000_cl_sm2.00.img.gz, (365, 174) - (475, 284)
[Tue Mar  6 14:49:03 2012] XMMSAS bgd. selection expression = annulus(36472.616000, 19911.698000, 1593.250046, 3186.500092, X, Y) && !ellipse(39942.972000, 18350.338000, 2056.256059, 2056.256059, 0.000000, X, Y) && !ellipse(33233.919400, 21240.326000, 1028.536030, 1028.536030, 0.000000, X, Y) && !ellipse(34285.750000, 20798.167200, 3506.608101, 438.325613, 21.795000, X, Y) && !ellipse(34732.408000, 20635.985800, 1753.304050, 1753.304050, 0.000000, X, Y) && !ellipse(35861.760000, 20134.916000, 1753.304050, 1753.304050, 0.000000, X, Y) && !ellipse(37675.526245, 19668.729919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37088.802000, 19895.388600, 1916.312055, 1916.312055, 0.000000, X, Y) && !ellipse(38140.894000, 19141.350000, 1915.512055, 1915.512055, 0.000000, X, Y) && !ellipse(38652.076000, 18893.634000, 1959.736056, 1959.736056, 0.000000, X, Y) && !ellipse(39196.810000, 18717.844000, 1646.120047, 1646.120047, 0.000000, X, Y) && !ellipse(37403.688416, 17847.413010, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar  6 14:49:03 2012] Writing fullrun_mos1_xmm0109090101_pi300-10000_pass1_cl_src3.gif
[Tue Mar  6 14:50:20 2012] Mean detx,y = (10616.33, -24.84) 
[Tue Mar  6 14:50:21 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar  6 14:50:32 2012] Binned source spectrum to 10 counts/bin
[Tue Mar  6 14:50:32 2012] Setting source spectrum file to fullrun_mos1_xmm0109090101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Mar  6 14:50:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109090101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Mar  6 21:11:14 2012] Updating aperture counts using extracted products
[Tue Mar  6 21:11:14 2012] Error reading totcts from fullrun_mos1_xmm0109090101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Mar  6 21:11:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar  6 21:11:15 2012] Using photon index=1.80, rate=0.0144, arf fullrun_mos1_xmm0109090101_pi300-10000_pass1_cl_src3.arf
[Tue Mar  6 21:11:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar  6 21:11:15 2012] Updating source flux to 2.4e-13
[Tue Mar  6 21:11:20 2012] Flag c found in src. 3 procflags, skipping spectral fitting