[Tue Mar 6 02:16:18 2012] Detection parameters: Position = (406.2, 235.3) = 5 37 51.26 -64 8 8.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 91.0 +/- 14.2 Background counts = 25.4 Rate = 0.008 +/- 0.001 [Tue Mar 6 02:16:18 2012] Off-axis axis estimate = 9.06' [Tue Mar 6 02:19:14 2012] Using EEF radius (= 10.96 ")to estimate initial spatial extent for simple fitting [Tue Mar 6 02:19:14 2012] Initial guess for spatial extent in simple fitting = 10.96" [Tue Mar 6 02:19:14 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.987 [Tue Mar 6 02:19:14 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.96" [Tue Mar 6 04:19:58 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_src23.ximg exists [Tue Mar 6 04:19:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_src23.csv [Tue Mar 6 04:19:58 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_src23_1.ximg exists [Tue Mar 6 04:19:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_src23.csv [Tue Mar 6 04:19:58 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_src23_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Mar 6 04:19:59 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists [Tue Mar 6 04:19:59 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists [Tue Mar 6 04:19:59 2012] Fit fullrun_mos1_xmm0109090101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly [Tue Mar 6 07:19:35 2012] Warning, spatial fit 23 centroid is now closest to src. 22 [Tue Mar 6 07:19:35 2012] Vigneting correction estimate = 1.000000 [Tue Mar 6 07:19:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Mar 6 07:19:35 2012] Assessing source extent using major [Tue Mar 6 07:19:35 2012] Source does appear to be extended [Tue Mar 6 07:19:35 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Mar 6 07:19:35 2012] Source is confused with source 3 [Tue Mar 6 07:19:47 2012] Using EEF radius (= 10.96 ")to estimate initial spatial extent for simple fitting [Tue Mar 6 07:19:47 2012] Initial guess for spatial extent in simple fitting = 10.96" [Tue Mar 6 07:19:47 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.987 [Tue Mar 6 07:19:47 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 10.96" [Tue Mar 6 10:19:55 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass1_src19.ximg exists [Tue Mar 6 10:19:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109090101_pi300-10000_cl_pass1_src19.csv [Tue Mar 6 10:19:55 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass1_src19_1.ximg exists [Tue Mar 6 10:19:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109090101_pi300-10000_cl_pass1_src19.csv [Tue Mar 6 10:19:55 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0109090101_pi300-10000_cl_pass1_src19_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0109090101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Mar 6 10:19:56 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Tue Mar 6 10:19:56 2012] fullrun_mos1_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Tue Mar 6 10:19:56 2012] Fit fullrun_mos1_xmm0109090101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly [Tue Mar 6 14:48:47 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 298.151925 pixels away [Tue Mar 6 14:48:47 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 224.790764 pixels away [Tue Mar 6 14:48:47 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 257.439911 pixels away [Tue Mar 6 14:48:47 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 232.631080 pixels away [Tue Mar 6 14:48:47 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 202.382678 pixels away [Tue Mar 6 14:48:47 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 207.870740 pixels away [Tue Mar 6 14:48:47 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 19.186440 pixels away [Tue Mar 6 14:48:47 2012] Spatial fit model total counts = 509.601000, observed total counts = 512.000000 [Tue Mar 6 14:48:47 2012] Offset between fit and detection position for source 23 = 7.291317 pixels Spatial fit parameters: Offset between fit and detection position for source 23 = 7.291317 pixels Position = (412.8, 232.0) = 5 37 46.92 -64 8 22.8 Extent = 21.9 (16.3-43.8)", rotation angle = 0 Source counts = 256.7 +/- 16.0 Background counts = 0.0 Rate = 0.01 +/- 0.0008 [Tue Mar 6 14:48:47 2012] Vigneting correction estimate = 1.000000 [Tue Mar 6 14:48:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Mar 6 14:48:47 2012] Assessing source extent using major axis lower bound [Tue Mar 6 14:48:47 2012] Source does appear to be extended [Tue Mar 6 14:48:47 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Mar 6 14:49:03 2012] XMMSAS src. selection expression = ellipse(35861.760000, 20134.916000, 1314.978038, 1314.978038, 0.000000, X, Y) [Tue Mar 6 14:49:03 2012] Writing source region out to fullrun_mos1_xmm0109090101_pi300-10000_pass1_cl_src23_src.reg [Tue Mar 6 14:49:03 2012] Extracting stamp from image fullrun_mos1_xmm0109090101_pi300-10000_cl_sm2.00.img.gz, (337, 156) - (488, 308) [Tue Mar 6 14:49:03 2012] XMMSAS bgd. selection expression = annulus(35861.760000, 20134.916000, 2191.630063, 4383.260126, X, Y) && !ellipse(39942.972000, 18350.338000, 2056.256059, 2056.256059, 0.000000, X, Y) && !ellipse(33233.919400, 21240.326000, 1028.536030, 1028.536030, 0.000000, X, Y) && !ellipse(36472.616000, 19911.698000, 1274.600037, 1274.600037, 0.000000, X, Y) && !ellipse(34285.750000, 20798.167200, 3506.608101, 438.325613, 21.795000, X, Y) && !ellipse(34732.408000, 20635.985800, 1753.304050, 1753.304050, 0.000000, X, Y) && !ellipse(37675.526245, 19668.729919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37088.802000, 19895.388600, 1916.312055, 1916.312055, 0.000000, X, Y) && !ellipse(38140.894000, 19141.350000, 1915.512055, 1915.512055, 0.000000, X, Y) && !ellipse(38652.076000, 18893.634000, 1959.736056, 1959.736056, 0.000000, X, Y) && !ellipse(39196.810000, 18717.844000, 1646.120047, 1646.120047, 0.000000, X, Y) && !ellipse(37403.688416, 17847.413010, 870.000000, 870.000000, 0.000000, X, Y) [Tue Mar 6 14:49:03 2012] Writing fullrun_mos1_xmm0109090101_pi300-10000_pass1_cl_src23.gif [Tue Mar 6 14:59:48 2012] Mean detx,y = (9972.14, 3.15) [Tue Mar 6 14:59:49 2012] Setting backscal keywords in source and bgd. spectrum [Tue Mar 6 15:00:18 2012] Binned source spectrum to 10 counts/bin [Tue Mar 6 15:00:18 2012] Setting source spectrum file to fullrun_mos1_xmm0109090101_pi300-10000_pass1_cl_src23_src_b10.pi.gz [Tue Mar 6 15:00:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109090101_pi300-10000_pass1_cl_src23_bgd.pi.gz [Tue Mar 6 21:11:15 2012] Updating aperture counts using extracted products [Tue Mar 6 21:11:15 2012] Error reading totcts from fullrun_mos1_xmm0109090101_pi300-10000_pass1_cl_src23_src_b10.pi.gz [Tue Mar 6 21:11:16 2012] Calculating source flux in energy range 0.30-8.00 [Tue Mar 6 21:11:16 2012] Using photon index=1.80, rate=0.0132, arf fullrun_mos1_xmm0109090101_pi300-10000_pass1_cl_src23.arf [Tue Mar 6 21:11:16 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Mar 6 21:11:16 2012] Updating source flux to 1.9e-13 [Tue Mar 6 21:11:20 2012] Flag c found in src. 23 procflags, skipping spectral fitting