[Fri Aug 17 13:24:34 2012] Detection parameters:
  Position = (295.6, 214.2) = 14 29 39.13 47 39 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 284.7 +/- 21.2
  Background counts = 18.5
  Rate = 0.01 +/- 0.0009

[Fri Aug 17 13:24:34 2012] Off-axis axis estimate = 6.11'
[Fri Aug 17 14:57:40 2012] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 14:57:40 2012] Initial guess for spatial extent in simple fitting = 9.49"
[Fri Aug 17 14:57:40 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.044
[Fri Aug 17 14:57:40 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.49"
[Fri Aug 17 15:33:51 2012] fullrun_mos2_xmm0109080901_pi300-10000_cl_pass0_src2.ximg exists
[Fri Aug 17 15:33:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109080901_pi300-10000_cl_pass0_src2.csv
[Fri Aug 17 15:33:51 2012] fullrun_mos2_xmm0109080901_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Aug 17 15:33:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109080901_pi300-10000_cl_pass0_src2.csv
[Fri Aug 17 15:33:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080901_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080901_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 15:33:51 2012] fullrun_mos2_xmm0109080901_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Aug 17 15:33:51 2012] fullrun_mos2_xmm0109080901_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Aug 17 15:33:51 2012] Fit fullrun_mos2_xmm0109080901_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Aug 17 15:34:07 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.493926 pixels away
[Fri Aug 17 15:34:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 15:34:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 15:34:07 2012] Assessing source extent using major
[Fri Aug 17 15:34:07 2012] Source does appear to be extended
[Fri Aug 17 15:34:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 16:54:53 2012] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 16:54:53 2012] Initial guess for spatial extent in simple fitting = 9.49"
[Fri Aug 17 16:54:53 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.044
[Fri Aug 17 16:54:53 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.49"
[Fri Aug 17 17:26:22 2012] fullrun_mos2_xmm0109080901_pi300-10000_cl_pass1_src2.ximg exists
[Fri Aug 17 17:26:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080901_pi300-10000_cl_pass1_src2.csv
[Fri Aug 17 17:26:22 2012] fullrun_mos2_xmm0109080901_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Aug 17 17:26:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080901_pi300-10000_cl_pass1_src2.csv
[Fri Aug 17 17:26:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080901_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080901_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 17:26:22 2012] fullrun_mos2_xmm0109080901_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Aug 17 17:26:22 2012] fullrun_mos2_xmm0109080901_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Aug 17 17:26:22 2012] Fit fullrun_mos2_xmm0109080901_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Aug 17 17:26:37 2012] Spatial fit model total counts = 437.837000, observed total counts = 437.000000
[Fri Aug 17 17:26:37 2012] Offset between fit and detection position for source 11 = 0.146797 pixels
[Fri Aug 17 17:26:37 2012] 437.735000 total counts/ 236.398000 bgd. counts: snr = 13.094885
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.146797 pixels
  Position = (295.7, 214.3) = 14 29 39.10 47 39 47.6
  Extent = 5.6 (4.9-6.4)", rotation angle = 0
  Source counts = 201.3 +/- 20.9
  Background counts = 236.4
  Rate = 0.005 +/- 0.0005
[Fri Aug 17 17:26:37 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 17:26:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 17:26:37 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 17:26:37 2012] Source does appear to be extended
[Fri Aug 17 17:26:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 19:32:50 2012] XMMSAS src. selection expression = ellipse(25678.926400, 18594.359600, 336.532810, 336.532810, 0.000000, X, Y)
[Fri Aug 17 19:32:50 2012] Writing source region out to fullrun_mos2_xmm0109080901_pi300-10000_pass1_cl_src11_src.reg
[Fri Aug 17 19:32:50 2012] Extracting stamp from image fullrun_mos2_xmm0109080901_pi300-10000_cl_sm2.00.img.gz, (276, 195) - (315, 234)
[Fri Aug 17 19:32:50 2012] XMMSAS bgd. selection expression = annulus(25678.926400, 18594.359600, 560.888016, 1121.776032, X, Y)
[Fri Aug 17 19:32:50 2012] Writing fullrun_mos2_xmm0109080901_pi300-10000_pass1_cl_src11.gif
[Fri Aug 17 19:40:25 2012] Mean detx,y = (7685.03, -5016.91) 
[Fri Aug 17 19:40:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 19:40:35 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 19:40:35 2012] Setting source spectrum file to fullrun_mos2_xmm0109080901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Aug 17 19:40:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109080901_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Aug 17 19:53:37 2012] Updating aperture counts using extracted products
[Fri Aug 17 19:53:37 2012] Error reading totcts from fullrun_mos2_xmm0109080901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Aug 17 19:53:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 19:53:38 2012] Using photon index=1.80, rate=0.00514, arf fullrun_mos2_xmm0109080901_pi300-10000_pass1_cl_src11.arf
[Fri Aug 17 19:53:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 19:53:38 2012] Updating source flux to 9.6e-14
[Fri Aug 17 19:54:34 2012] Reading fit data from xmm0109080901/analysis//spectral/fullrun_mos2_xmm0109080901_pi300-10000_pass1_cl_src11_pl.csv
[Fri Aug 17 19:54:34 2012] Spectral fit parameter nH value = 9.25142e+13
[Fri Aug 17 19:54:34 2012] Spectral fit parameter PhoIndex value = 2.29004
[Fri Aug 17 19:54:34 2012] Failed to get F(0.3-8.0) from xmm0109080901/analysis//spectral/fullrun_mos2_xmm0109080901_pi300-10000_pass1_cl_src11_pl.csv, possibly due to different flux energy range selected
[Fri Aug 17 19:54:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 19:54:34 2012] Using Nh = 9.3e+13, photon index=2.29, rate=0.00514, arf fullrun_mos2_xmm0109080901_pi300-10000_pass1_cl_src11.arf
[Fri Aug 17 19:54:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 19:54:34 2012] Updating source flux to 8e-14