[Fri Aug 17 13:24:10 2012] Detection parameters:
  Position = (181.1, 461.1) = 14 30 28.75 47 57 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.6 +/- 9.7
  Background counts = 13.5
  Rate = 0.001 +/- 0.0002

[Fri Aug 17 13:24:10 2012] Off-axis axis estimate = 14.54'
[Fri Aug 17 14:15:08 2012] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 14:15:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 14:15:08 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Fri Aug 17 14:15:08 2012] source mask rpix=3.1, npix_max = 53, mask sum = 57, frac = 1.070
[Fri Aug 17 14:15:08 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 13.70"
[Fri Aug 17 14:57:40 2012] fullrun_mos1_xmm0109080901_pi300-10000_cl_pass0_src26.ximg exists
[Fri Aug 17 14:57:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080901_pi300-10000_cl_pass0_src26.csv
[Fri Aug 17 14:57:40 2012] fullrun_mos1_xmm0109080901_pi300-10000_cl_pass0_src26_1.ximg exists
[Fri Aug 17 14:57:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080901_pi300-10000_cl_pass0_src26.csv
[Fri Aug 17 14:57:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109080901_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109080901_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 14:57:40 2012] fullrun_mos1_xmm0109080901_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Fri Aug 17 14:57:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109080901_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Aug 17 14:57:40 2012] fullrun_mos1_xmm0109080901_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Fri Aug 17 14:57:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109080901_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Aug 17 14:57:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109080901_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109080901_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 15:34:03 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 18.516214 pixels away
[Fri Aug 17 15:34:03 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 15:34:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 15:34:03 2012] Assessing source extent using major
[Fri Aug 17 15:34:03 2012] Source does appear to be extended
[Fri Aug 17 15:34:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 16:16:13 2012] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 16:16:13 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Fri Aug 17 16:16:13 2012] source mask rpix=3.1, npix_max = 53, mask sum = 57, frac = 1.070
[Fri Aug 17 16:16:13 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 13.70"
[Fri Aug 17 16:54:52 2012] fullrun_mos1_xmm0109080901_pi300-10000_cl_pass1_src23.ximg exists
[Fri Aug 17 16:54:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080901_pi300-10000_cl_pass1_src23.csv
[Fri Aug 17 16:54:52 2012] fullrun_mos1_xmm0109080901_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Aug 17 16:54:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080901_pi300-10000_cl_pass1_src23.csv
[Fri Aug 17 16:54:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109080901_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109080901_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 16:54:53 2012] fullrun_mos1_xmm0109080901_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Aug 17 16:54:53 2012] fullrun_mos1_xmm0109080901_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Aug 17 16:54:53 2012] Fit fullrun_mos1_xmm0109080901_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Fri Aug 17 17:26:33 2012] Spatial fit model total counts = 193.479000, observed total counts = 177.000000
[Fri Aug 17 17:26:33 2012] Offset between fit and detection position for source 4 = 1.811388 pixels
[Fri Aug 17 17:26:33 2012] 183.026100 total counts/ 134.577000 bgd. counts: snr = 4.176383
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.811388 pixels
  Position = (179.3, 461.1) = 14 30 29.53 47 57 40.7
  Extent = 7.7 (5.1-11.0)", rotation angle = 0
  Source counts = 48.4 +/- 13.5
  Background counts = 134.6
  Rate = 0.001 +/- 0.0003
[Fri Aug 17 17:26:33 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 17:26:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 17:26:33 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 17:26:33 2012] Source does appear to be extended
[Fri Aug 17 17:26:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 19:02:33 2012] XMMSAS src. selection expression = ellipse(15548.639800, 40069.594600, 463.671613, 463.671613, 0.000000, X, Y)
[Fri Aug 17 19:02:33 2012] Writing source region out to fullrun_mos1_xmm0109080901_pi300-10000_pass1_cl_src4_src.reg
[Fri Aug 17 19:02:33 2012] Extracting stamp from image fullrun_mos1_xmm0109080901_pi300-10000_cl_sm2.00.img.gz, (153, 434) - (206, 488)
[Fri Aug 17 19:02:33 2012] XMMSAS bgd. selection expression = annulus(15548.639800, 40069.594600, 772.786022, 1545.572044, X, Y)
[Fri Aug 17 19:02:33 2012] Writing fullrun_mos1_xmm0109080901_pi300-10000_pass1_cl_src4.gif
[Fri Aug 17 19:09:20 2012] Mean detx,y = (14533.13, 5888.91) 
[Fri Aug 17 19:09:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 19:09:34 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 19:09:34 2012] Setting source spectrum file to fullrun_mos1_xmm0109080901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Aug 17 19:09:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109080901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Aug 17 19:32:28 2012] Not generating rmf since there are only 48 counts
[Fri Aug 17 19:32:28 2012] rmf not generated due to insufficient counts
[Fri Aug 17 19:53:37 2012] Updating aperture counts using extracted products
[Fri Aug 17 19:53:37 2012] Error reading totcts from fullrun_mos1_xmm0109080901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Aug 17 19:53:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 19:53:37 2012] Using photon index=1.80, rate=0.00125, arf fullrun_mos1_xmm0109080901_pi300-10000_pass1_cl_src4.arf
[Fri Aug 17 19:53:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 19:53:37 2012] Updating source flux to 3.6e-14
[Fri Aug 17 19:53:39 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting