[Sat Jun 16 02:41:14 2012] Detection parameters:
  Position = (299.2, 321.9) = 11 17 6.36 44 13 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10531.9 +/- 123.2
  Background counts = 17.8
  Rate = 0.2 +/- 0.003

[Sat Jun 16 02:41:15 2012] Off-axis axis estimate = 1.70'
[Sat Jun 16 03:42:21 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 03:42:21 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Jun 16 03:42:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sat Jun 16 03:42:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Jun 16 04:11:58 2012] fullrun_mos1_xmm0109080801_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 16 04:11:58 2012] fullrun_mos1_xmm0109080801_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 16 04:11:58 2012] Fit fullrun_mos1_xmm0109080801_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Jun 16 04:11:58 2012] fullrun_mos1_xmm0109080801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 16 04:11:58 2012] fullrun_mos1_xmm0109080801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 16 04:11:58 2012] Fit fullrun_mos1_xmm0109080801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 16 04:50:43 2012] Spatial fit model total counts = 9067.220000, observed total counts = 9068.000000
[Sat Jun 16 04:50:43 2012] Offset between fit and detection position for source 1 = 0.179205 pixels
[Sat Jun 16 04:50:43 2012] 9066.810000 total counts/ 2074.400000 bgd. counts: snr = 153.525540
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.179205 pixels
  Position = (299.0, 321.9) = 11 17 6.43 44 13 32.7
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 6992.4 +/- 95.2
  Background counts = 2074.4
  Rate = 0.2 +/- 0.002
[Sat Jun 16 04:50:43 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 04:50:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 04:50:43 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 04:50:43 2012] Source does appear to be extended
[Sat Jun 16 04:50:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 05:33:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 05:33:20 2012] Initial guess for spatial extent in simple fitting = 5.29"
[Sat Jun 16 05:33:20 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.358
[Sat Jun 16 05:33:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.29"
[Sat Jun 16 05:55:05 2012] fullrun_mos1_xmm0109080801_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 16 05:55:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080801_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 05:55:05 2012] fullrun_mos1_xmm0109080801_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 16 05:55:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080801_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 05:55:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109080801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109080801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 05:55:05 2012] fullrun_mos1_xmm0109080801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 16 05:55:05 2012] fullrun_mos1_xmm0109080801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 16 05:55:05 2012] Fit fullrun_mos1_xmm0109080801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 16 06:30:57 2012] Spatial fit model total counts = 9069.560000, observed total counts = 9062.000000
[Sat Jun 16 06:30:57 2012] Offset between fit and detection position for source 1 = 0.011163 pixels
[Sat Jun 16 06:30:57 2012] 9098.510000 total counts/ 2081.410000 bgd. counts: snr = 153.807972
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011163 pixels
  Position = (299.0, 321.8) = 11 17 6.43 44 13 32.6
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 7017.1 +/- 95.4
  Background counts = 2081.4
  Rate = 0.2 +/- 0.002
[Sat Jun 16 06:30:57 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 06:30:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 06:30:57 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 06:30:57 2012] Source does appear to be extended
[Sat Jun 16 06:30:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 07:55:55 2012] Counts = 7017.100000, rescaling region sizes by 2.000000
[Sat Jun 16 07:55:55 2012] XMMSAS src. selection expression = ellipse(25968.040300, 27951.651200, 637.039218, 637.039218, 0.000000, X, Y)
[Sat Jun 16 07:55:55 2012] Writing source region out to fullrun_mos1_xmm0109080801_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 16 07:55:55 2012] Extracting stamp from image fullrun_mos1_xmm0109080801_pi300-10000_cl_sm2.00.img.gz, (262, 285) - (336, 358)
[Sat Jun 16 07:55:55 2012] XMMSAS bgd. selection expression = annulus(25968.040300, 27951.651200, 2123.464061, 4246.928122, X, Y) && !ellipse(25201.383514, 25708.780853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27621.800480, 30524.838400, 315.769609, 315.769609, 0.000000, X, Y)
[Sat Jun 16 07:55:55 2012] Writing fullrun_mos1_xmm0109080801_pi300-10000_pass1_cl_src1.gif
[Sat Jun 16 07:55:59 2012] Mean detx,y = (283.53, -229.98) 
[Sat Jun 16 07:56:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 07:56:46 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 07:56:46 2012] Setting source spectrum file to fullrun_mos1_xmm0109080801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 07:56:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109080801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 16 08:36:24 2012] Updating aperture counts using extracted products
[Sat Jun 16 08:36:24 2012] Error reading totcts from fullrun_mos1_xmm0109080801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 08:36:24 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 08:36:24 2012] Using photon index=1.80, rate=0.166, arf fullrun_mos1_xmm0109080801_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 08:36:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 08:36:24 2012] Updating source flux to 1.6e-12
[Sat Jun 16 08:36:48 2012] Reading fit data from xmm0109080801/analysis//spectral/fullrun_mos1_xmm0109080801_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun 16 08:36:48 2012] Spectral fit parameter nH value = 886730000000.0
[Sat Jun 16 08:36:48 2012] Spectral fit parameter PhoIndex value = 1.0488
[Sat Jun 16 08:36:48 2012] Failed to get F(0.3-8.0) from xmm0109080801/analysis//spectral/fullrun_mos1_xmm0109080801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun 16 08:36:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 08:36:48 2012] Using Nh = 8.9e+11, photon index=1.05, rate=0.166, arf fullrun_mos1_xmm0109080801_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 08:36:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 08:36:49 2012] Updating source flux to 2.4e-12