[Fri Jun 28 23:37:42 2013] Detection parameters:
  Position = (225.0, 328.0) = 14 47 18.30 40 35 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.4 +/- 15.5
  Background counts = 47.0
  Rate = 0.009 +/- 0.001

[Fri Jun 28 23:37:42 2013] Off-axis axis estimate = 5.74'
[Fri Jun 28 23:39:42 2013] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Fri Jun 28 23:39:42 2013] Initial guess for spatial extent in simple fitting = 9.30"
[Fri Jun 28 23:39:42 2013] source mask rpix=2.1, npix_max = 27, mask sum = 35, frac = 1.258
[Fri Jun 28 23:39:42 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 9.30"
[Fri Jun 28 23:54:51 2013] fullrun_pn_xmm0109080601_pi300-10000_cl_pass0_src10.ximg exists
[Fri Jun 28 23:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080601_pi300-10000_cl_pass0_src10.csv
[Fri Jun 28 23:54:51 2013] fullrun_pn_xmm0109080601_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Jun 28 23:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080601_pi300-10000_cl_pass0_src10.csv
[Fri Jun 28 23:54:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109080601_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109080601_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 23:54:51 2013] fullrun_pn_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Jun 28 23:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Jun 28 23:54:51 2013] fullrun_pn_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Jun 28 23:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Jun 28 23:54:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 00:26:01 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.840150 pixels away
[Sat Jun 29 00:26:01 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 00:26:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 00:26:01 2013] Assessing source extent using major
[Sat Jun 29 00:26:01 2013] Source does appear to be extended
[Sat Jun 29 00:26:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 00:26:10 2013] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 00:26:10 2013] Initial guess for spatial extent in simple fitting = 9.30"
[Sat Jun 29 00:26:10 2013] source mask rpix=2.1, npix_max = 27, mask sum = 35, frac = 1.258
[Sat Jun 29 00:26:10 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 9.30"
[Sat Jun 29 00:38:42 2013] fullrun_pn_xmm0109080601_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jun 29 00:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080601_pi300-10000_cl_pass1_src10.csv
[Sat Jun 29 00:38:42 2013] fullrun_pn_xmm0109080601_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jun 29 00:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080601_pi300-10000_cl_pass1_src10.csv
[Sat Jun 29 00:38:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109080601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109080601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 00:38:42 2013] fullrun_pn_xmm0109080601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jun 29 00:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Jun 29 00:38:42 2013] fullrun_pn_xmm0109080601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jun 29 00:38:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Jun 29 00:38:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109080601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109080601_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 01:07:42 2013] Spatial fit model total counts = 258.496000, observed total counts = 192.000000
[Sat Jun 29 01:07:42 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 29 01:07:42 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 01:07:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 01:07:42 2013] Assessing source extent using major
[Sat Jun 29 01:07:42 2013] Source does appear to be extended
[Sat Jun 29 01:07:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 01:07:51 2013] XMMSAS src. selection expression = ellipse(19530.287399, 28488.142517, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 29 01:07:51 2013] Writing source region out to fullrun_pn_xmm0109080601_pi300-10000_pass1_cl_src11_src.reg
[Sat Jun 29 01:07:51 2013] Extracting stamp from image fullrun_pn_xmm0109080601_pi300-10000_cl_sm2.00.img.gz, (188, 291) - (263, 366)
[Sat Jun 29 01:07:51 2013] XMMSAS bgd. selection expression = annulus(19530.287399, 28488.142517, 1087.500000, 2175.000000, X, Y) && !ellipse(20979.778076, 28809.576294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19681.391754, 30835.037079, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 29 01:07:51 2013] Writing fullrun_pn_xmm0109080601_pi300-10000_pass1_cl_src11.gif
[Sat Jun 29 01:14:09 2013] Mean detx,y = (-7046.74, -1822.97) 
[Sat Jun 29 01:14:11 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 29 01:14:32 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 29 01:14:32 2013] Setting source spectrum file to fullrun_pn_xmm0109080601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun 29 01:14:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109080601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jun 29 01:23:14 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 29 01:23:14 2013] rmf not generated due to insufficient counts
[Sat Jun 29 01:38:16 2013] Updating aperture counts using extracted products
[Sat Jun 29 01:38:16 2013] Total counts from fullrun_pn_xmm0109080601_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 173.00
[Sat Jun 29 01:38:17 2013] Total counts from fullrun_pn_xmm0109080601_pi300-10000_pass1_cl_src11_bgd.pi.gz = 573.00
[Sat Jun 29 01:38:17 2013] Got source and background scale factors 1076402.000000, 6943011.000000
[Sat Jun 29 01:38:17 2013] User source parameters:
  Position = (225.0, 328.0) = 14 47 18.30 40 35 41.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 84.2 +/- 14.2
  Background aperture counts = 88.8
  Rate = 0.005 +/- 0.0008

[Sat Jun 29 01:38:17 2013] Updating counts from extracted products
[Sat Jun 29 01:38:17 2013] Set source signif. to 84.17/9.43 = 8.93
[Sat Jun 29 01:38:17 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 01:38:17 2013] Using photon index=1.80, rate=0.00481, arf fullrun_pn_xmm0109080601_pi300-10000_pass1_cl_src11.arf
[Sat Jun 29 01:38:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 29 01:38:17 2013] Updating source flux to 2.1e-14
[Sat Jun 29 01:38:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 29 01:38:25 2013] xmm0109080601/analysis//spectral/fullrun_pn_xmm0109080601_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete