[Fri Jun 28 23:38:19 2013] Detection parameters:
  Position = (238.9, 494.2) = 14 47 13.07 40 47 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.4 +/- 12.4
  Background counts = 10.7
  Rate = 0.004 +/- 0.0006

[Fri Jun 28 23:38:19 2013] Off-axis axis estimate = 14.84'
[Sat Jun 29 00:11:47 2013] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 00:11:47 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 29 00:11:47 2013] Initial guess for spatial extent in simple fitting = 13.85"
[Sat Jun 29 00:11:47 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.032
[Sat Jun 29 00:11:47 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 13.85"
[Sat Jun 29 00:25:59 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_src7.ximg exists
[Sat Jun 29 00:25:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_src7.csv
[Sat Jun 29 00:25:59 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Jun 29 00:25:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_src7.csv
[Sat Jun 29 00:25:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 00:25:59 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Jun 29 00:25:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun 29 00:25:59 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Jun 29 00:25:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun 29 00:25:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 00:26:05 2013] Spatial fit model total counts = 139.387000, observed total counts = 110.000000
[Sat Jun 29 00:26:05 2013] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 29 00:26:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 00:26:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 00:26:05 2013] Assessing source extent using major
[Sat Jun 29 00:26:05 2013] Source does appear to be extended
[Sat Jun 29 00:26:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 00:52:43 2013] Using EEF radius (= 13.85 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 00:52:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 29 00:52:43 2013] Initial guess for spatial extent in simple fitting = 13.85"
[Sat Jun 29 00:52:43 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.032
[Sat Jun 29 00:52:43 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 13.85"
[Sat Jun 29 01:07:39 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_src7.ximg exists
[Sat Jun 29 01:07:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_src7.csv
[Sat Jun 29 01:07:39 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Jun 29 01:07:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_src7.csv
[Sat Jun 29 01:07:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 01:07:39 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Jun 29 01:07:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat Jun 29 01:07:39 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Jun 29 01:07:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat Jun 29 01:07:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 01:07:45 2013] Spatial fit model total counts = 139.387000, observed total counts = 110.000000
[Sat Jun 29 01:07:45 2013] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 29 01:07:45 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 01:07:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 01:07:45 2013] Assessing source extent using major
[Sat Jun 29 01:07:45 2013] Source does appear to be extended
[Sat Jun 29 01:07:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 01:31:01 2013] XMMSAS src. selection expression = ellipse(20737.777466, 42948.775513, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 29 01:31:01 2013] Writing source region out to fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src16_src.reg
[Sat Jun 29 01:31:01 2013] Extracting stamp from image fullrun_mos2_xmm0109080601_pi300-10000_cl_sm2.00.img.gz, (201, 457) - (276, 532)
[Sat Jun 29 01:31:01 2013] XMMSAS bgd. selection expression = annulus(20737.777466, 42948.775513, 1087.500000, 2175.000000, X, Y) && !ellipse(20122.685501, 41460.594421, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 29 01:31:01 2013] Writing fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src16.gif
[Sat Jun 29 01:32:28 2013] Mean detx,y = (4509.12, 15820.81) 
[Sat Jun 29 01:32:28 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 29 01:32:38 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 29 01:32:38 2013] Setting source spectrum file to fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Jun 29 01:32:38 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat Jun 29 01:37:17 2013] Not generating rmf since there are only 87 counts
[Sat Jun 29 01:37:17 2013] rmf not generated due to insufficient counts
[Sat Jun 29 01:38:19 2013] Updating aperture counts using extracted products
[Sat Jun 29 01:38:19 2013] Total counts from fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 88.00
[Sat Jun 29 01:38:19 2013] Total counts from fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src16_bgd.pi.gz = 124.00
[Sat Jun 29 01:38:19 2013] Got source and background scale factors 1111996.000000, 4005464.000000
[Sat Jun 29 01:38:19 2013] User source parameters:
  Position = (238.9, 494.2) = 14 47 13.07 40 47 45.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 53.6 +/- 10.4
  Background aperture counts = 34.4
  Rate = 0.003 +/- 0.0005

[Sat Jun 29 01:38:19 2013] Updating counts from extracted products
[Sat Jun 29 01:38:19 2013] Set source signif. to 53.58/5.87 = 9.13
[Sat Jun 29 01:38:20 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 01:38:20 2013] Using photon index=1.80, rate=0.00266, arf fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src16.arf
[Sat Jun 29 01:38:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 29 01:38:20 2013] Updating source flux to 9.2e-14
[Sat Jun 29 01:38:22 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 29 01:38:23 2013] xmm0109080601/analysis//spectral/fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete