[Fri Jun 28 23:38:19 2013] Detection parameters:
  Position = (309.6, 319.2) = 14 46 46.02 40 35 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5618.7 +/- 88.7
  Background counts = 17.6
  Rate = 0.3 +/- 0.004

[Fri Jun 28 23:38:19 2013] Off-axis axis estimate = 1.71'
[Sat Jun 29 00:11:47 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 00:11:47 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Jun 29 00:11:47 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Sat Jun 29 00:11:47 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Jun 29 00:25:59 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 29 00:25:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_src1.csv
[Sat Jun 29 00:25:59 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 29 00:25:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_src1.csv
[Sat Jun 29 00:25:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 00:25:59 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 29 00:25:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 29 00:25:59 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 29 00:25:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 29 00:25:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 00:26:05 2013] Source 1 is offset by -6.145438 and -7.466056 pixels which is larger than
2 X fitted extent = 0.837159 x 0.837159, not incorporating fit results
[Sat Jun 29 00:26:05 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 00:26:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 00:26:05 2013] Assessing source extent using major
[Sat Jun 29 00:26:05 2013] Source does appear to be extended
[Sat Jun 29 00:26:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 00:52:43 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 00:52:43 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Jun 29 00:52:43 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Sat Jun 29 00:52:43 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Sat Jun 29 01:07:39 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 29 01:07:39 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 29 01:07:39 2013] Fit fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Jun 29 01:07:39 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 29 01:07:39 2013] fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 29 01:07:39 2013] Fit fullrun_mos2_xmm0109080601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 29 01:07:45 2013] Spatial fit model total counts = 4829.520000, observed total counts = 4664.000000
[Sat Jun 29 01:07:45 2013] Offset between fit and detection position for source 1 = 0.274903 pixels
[Sat Jun 29 01:07:45 2013] 4864.150000 total counts/ 1286.890000 bgd. counts: snr = 99.719431
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.274903 pixels
  Position = (309.3, 319.4) = 14 46 46.10 40 35 5.1
  Extent = 5.6 (5.4-5.8)" x 5.0 (4.8-5.2)", rotation angle = 344 (330-354) degrees
  Source counts = 3577.3 +/- 69.7
  Background counts = 1286.9
  Rate = 0.2 +/- 0.003
[Sat Jun 29 01:07:45 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 01:07:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 01:07:45 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 01:07:45 2013] Source does appear to be extended
[Sat Jun 29 01:07:45 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05
[Sat Jun 29 01:31:01 2013] Counts = 3577.260000, rescaling region sizes by 2.000000
[Sat Jun 29 01:31:01 2013] XMMSAS src. selection expression = ellipse(26864.732000, 27740.614400, 670.897219, 596.516417, 343.844889, X, Y)
[Sat Jun 29 01:31:01 2013] Writing source region out to fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 29 01:31:01 2013] Extracting stamp from image fullrun_mos2_xmm0109080601_pi300-10000_cl_sm2.00.img.gz, (271, 281) - (348, 358)
[Sat Jun 29 01:31:01 2013] XMMSAS bgd. selection expression = annulus(26864.732000, 27740.614400, 2236.324064, 4472.648129, X, Y)
[Sat Jun 29 01:31:01 2013] Writing fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src1.gif
[Sat Jun 29 01:31:03 2013] Mean detx,y = (59.51, 87.56) 
[Sat Jun 29 01:31:04 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 29 01:31:39 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 29 01:31:39 2013] Setting source spectrum file to fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 29 01:31:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 29 01:38:19 2013] Updating aperture counts using extracted products
[Sat Jun 29 01:38:19 2013] Total counts from fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 4490.00
[Sat Jun 29 01:38:19 2013] Total counts from fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1165.00
[Sat Jun 29 01:38:19 2013] Got source and background scale factors 1212844.000000, 26933457.000000
[Sat Jun 29 01:38:19 2013] User source parameters:
  Position = (309.3, 319.4) = 14 46 46.10 40 35 5.1
  Extent = 5.6 (5.4-5.8)" x 5.0 (4.8-5.2)", rotation angle = 344 (330-354) degrees
  Source aperture counts = 4437.5 +/- 68.0
  Background aperture counts = 52.5
  Rate = 0.2 +/- 0.003

[Sat Jun 29 01:38:20 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 01:38:20 2013] Using photon index=1.80, rate=0.178, arf fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src1.arf
[Sat Jun 29 01:38:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 29 01:38:20 2013] Updating source flux to 1.9e-12
[Sat Jun 29 01:38:22 2013] Flag b found in src. 1 procflags, skipping spectral fitting
[Sat Jun 29 01:38:23 2013] xmm0109080601/analysis//spectral/fullrun_mos2_xmm0109080601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete