[Tue May 14 20:37:31 2013] Detection parameters:
  Position = (304.2, 404.9) = 14 17 1.29 45 5 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.1 +/- 9.5
  Background counts = 21.4
  Rate = 0.002 +/- 0.0004

[Tue May 14 20:37:31 2013] Off-axis axis estimate = 7.73'
[Tue May 14 20:39:53 2013] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Tue May 14 20:39:53 2013] Initial guess for spatial extent in simple fitting = 10.29"
[Tue May 14 20:39:53 2013] source mask rpix=2.4, npix_max = 32, mask sum = 34, frac = 1.035
[Tue May 14 20:39:53 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 10.29"
[Tue May 14 21:50:23 2013] fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_src25.ximg exists
[Tue May 14 21:50:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_src25.csv
[Tue May 14 21:50:23 2013] fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_src25_1.ximg exists
[Tue May 14 21:50:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_src25.csv
[Tue May 14 21:50:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 21:50:23 2013] fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Tue May 14 21:50:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src25.csv
[Tue May 14 21:50:23 2013] fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Tue May 14 21:50:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src25.csv
[Tue May 14 21:50:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 23:08:20 2013] Spatial fit model total counts = 222.639000, observed total counts = 199.000000
[Tue May 14 23:08:20 2013] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 23:08:20 2013] Vigneting correction estimate = 1.000000
[Tue May 14 23:08:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 23:08:20 2013] Assessing source extent using major
[Tue May 14 23:08:20 2013] Source does appear to be extended
[Tue May 14 23:08:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 23:08:20 2013] Deleting source due to low Poisson probability 0.9