[Tue May 14 20:37:31 2013] Detection parameters:
  Position = (387.2, 317.2) = 14 16 27.28 44 59 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.3 +/- 13.7
  Background counts = 23.0
  Rate = 0.008 +/- 0.001

[Tue May 14 20:37:31 2013] Off-axis axis estimate = 6.57'
[Tue May 14 20:39:53 2013] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Tue May 14 20:39:53 2013] Initial guess for spatial extent in simple fitting = 9.72"
[Tue May 14 20:39:53 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.205
[Tue May 14 20:39:53 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.72"
[Tue May 14 21:50:23 2013] fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_src15.ximg exists
[Tue May 14 21:50:23 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_src15.csv
[Tue May 14 21:50:23 2013] fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue May 14 21:50:23 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_src15.csv
[Tue May 14 21:50:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 21:50:23 2013] fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue May 14 21:50:23 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue May 14 21:50:23 2013] fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue May 14 21:50:23 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue May 14 21:50:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 23:08:20 2013] Source 15 is offset by 7.116152 and 6.211307 pixels which is larger than
2 X fitted extent = 1.322032 x 1.322032, not incorporating fit results
[Tue May 14 23:08:20 2013] Vigneting correction estimate = 1.000000
[Tue May 14 23:08:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 23:08:20 2013] Assessing source extent using major
[Tue May 14 23:08:20 2013] Source does appear to be extended
[Tue May 14 23:08:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 23:08:35 2013] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Tue May 14 23:08:35 2013] Initial guess for spatial extent in simple fitting = 9.72"
[Tue May 14 23:08:35 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.205
[Tue May 14 23:08:35 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 9.72"
[Tue May 14 23:47:12 2013] fullrun_pn_xmm0109080501_pi300-10000_cl_pass1_src15.ximg exists
[Tue May 14 23:47:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080501_pi300-10000_cl_pass1_src15.csv
[Tue May 14 23:47:12 2013] fullrun_pn_xmm0109080501_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue May 14 23:47:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080501_pi300-10000_cl_pass1_src15.csv
[Tue May 14 23:47:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109080501_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109080501_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 23:47:13 2013] fullrun_pn_xmm0109080501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue May 14 23:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080501_pi300-10000_cl_pass1_tfrozen_src15.csv
[Tue May 14 23:47:13 2013] fullrun_pn_xmm0109080501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue May 14 23:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080501_pi300-10000_cl_pass1_tfrozen_src15.csv
[Tue May 14 23:47:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109080501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109080501_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 00:59:14 2013] Source 15 is offset by 2.231405 and 2.291445 pixels which is larger than
2 X fitted extent = 1.152878 x 1.152878, not incorporating fit results
[Wed May 15 00:59:14 2013] Vigneting correction estimate = 1.000000
[Wed May 15 00:59:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 00:59:14 2013] Assessing source extent using major
[Wed May 15 00:59:14 2013] Source does appear to be extended
[Wed May 15 00:59:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 00:59:36 2013] XMMSAS src. selection expression = ellipse(33633.597260, 27544.263672, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 15 00:59:36 2013] Writing source region out to fullrun_pn_xmm0109080501_pi300-10000_pass1_cl_src15_src.reg
[Wed May 15 00:59:36 2013] Extracting stamp from image fullrun_pn_xmm0109080501_pi300-10000_cl_sm2.00.img.gz, (350, 280) - (425, 355)
[Wed May 15 00:59:36 2013] XMMSAS bgd. selection expression = annulus(33633.597260, 27544.263672, 1087.500000, 2175.000000, X, Y) && !ellipse(34306.426819, 27226.106201, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 15 00:59:36 2013] Writing fullrun_pn_xmm0109080501_pi300-10000_pass1_cl_src15.gif
[Wed May 15 01:19:28 2013] Mean detx,y = (-7085.49, -3635.58) 
[Wed May 15 01:19:34 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 15 01:20:13 2013] Binned source spectrum to 10 counts/bin
[Wed May 15 01:20:14 2013] Setting source spectrum file to fullrun_pn_xmm0109080501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May 15 01:20:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109080501_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed May 15 01:46:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 15 01:46:04 2013] rmf not generated due to insufficient counts
[Wed May 15 02:41:46 2013] Updating aperture counts using extracted products
[Wed May 15 02:41:46 2013] Total counts from fullrun_pn_xmm0109080501_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 208.00
[Wed May 15 02:41:46 2013] Total counts from fullrun_pn_xmm0109080501_pi300-10000_pass1_cl_src15_bgd.pi.gz = 868.00
[Wed May 15 02:41:46 2013] Got source and background scale factors 1129344.000000, 8593081.000000
[Wed May 15 02:41:46 2013] User source parameters:
  Position = (387.2, 317.2) = 14 16 27.28 44 59 5.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 93.9 +/- 15.4
  Background aperture counts = 114.1
  Rate = 0.004 +/- 0.0007

[Wed May 15 02:41:46 2013] Updating counts from extracted products
[Wed May 15 02:41:46 2013] Set source signif. to 93.92/10.68 = 8.79
[Wed May 15 02:41:51 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 02:41:51 2013] Using photon index=1.80, rate=0.00422, arf fullrun_pn_xmm0109080501_pi300-10000_pass1_cl_src15.arf
[Wed May 15 02:41:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 02:41:51 2013] Updating source flux to 1.8e-14
[Wed May 15 02:42:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 15 02:42:18 2013] xmm0109080501/analysis//spectral/fullrun_pn_xmm0109080501_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete