[Tue May 14 20:37:55 2013] Detection parameters:
  Position = (330.6, 150.7) = 14 16 50.52 44 47 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.5 +/- 13.3
  Background counts = 7.0
  Rate = 0.009 +/- 0.001

[Tue May 14 20:37:56 2013] Off-axis axis estimate = 10.96'
[Tue May 14 21:50:24 2013] Using EEF radius (= 11.91 ")to estimate initial spatial extent for simple fitting
[Tue May 14 21:50:24 2013] Initial guess for spatial extent in simple fitting = 11.91"
[Tue May 14 21:50:24 2013] source mask rpix=2.7, npix_max = 41, mask sum = 49, frac = 1.168
[Tue May 14 21:50:24 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 11.91"
[Tue May 14 22:32:22 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_src4.ximg exists
[Tue May 14 22:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_src4.csv
[Tue May 14 22:32:22 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue May 14 22:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_src4.csv
[Tue May 14 22:32:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 22:32:22 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue May 14 22:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May 14 22:32:22 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue May 14 22:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue May 14 22:32:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 23:08:24 2013] Warning, spatial fit 4 centroid is now closest to src. 17
[Tue May 14 23:08:24 2013] Source 18 is offset by -5.790828 and 4.073497 pixels which is larger than
2 X fitted extent = 1.452267 x 1.452267, not incorporating fit results
[Tue May 14 23:08:24 2013] Vigneting correction estimate = 1.000000
[Tue May 14 23:08:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 23:08:24 2013] Assessing source extent using major
[Tue May 14 23:08:24 2013] Source does appear to be extended
[Tue May 14 23:08:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 23:47:13 2013] Using EEF radius (= 11.91 ")to estimate initial spatial extent for simple fitting
[Tue May 14 23:47:13 2013] Initial guess for spatial extent in simple fitting = 11.91"
[Tue May 14 23:47:13 2013] source mask rpix=2.7, npix_max = 41, mask sum = 49, frac = 1.168
[Tue May 14 23:47:13 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 11.91"
[Wed May 15 00:23:55 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass1_src4.ximg exists
[Wed May 15 00:23:55 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed May 15 00:23:55 2013] Fit fullrun_mos1_xmm0109080501_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed May 15 00:23:56 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed May 15 00:23:56 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed May 15 00:23:56 2013] Fit fullrun_mos1_xmm0109080501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed May 15 00:59:20 2013] Spatial fit model total counts = 195.947000, observed total counts = 183.000000
[Wed May 15 00:59:20 2013] Offset between fit and detection position for source 18 = 0.098867 pixels
[Wed May 15 00:59:20 2013] 197.474600 total counts/ 114.716000 bgd. counts: snr = 7.726826
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.098867 pixels
  Position = (330.5, 150.6) = 14 16 50.55 44 47 1.4
  Extent = 7.1 (5.5-9.5)" x 3.8 (3.1-4.8)", rotation angle = 357 (340-11) degrees
  Source counts = 82.8 +/- 14.1
  Background counts = 114.7
  Rate = 0.003 +/- 0.0006
[Wed May 15 00:59:20 2013] Vigneting correction estimate = 1.000000
[Wed May 15 00:59:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 00:59:20 2013] Assessing source extent using major axis lower bound
[Wed May 15 00:59:20 2013] Source does appear to be extended
[Wed May 15 00:59:20 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Wed May 15 01:50:01 2013] XMMSAS src. selection expression = ellipse(28707.162200, 13055.282200, 424.734612, 229.569007, 356.598090, X, Y)
[Wed May 15 01:50:01 2013] Writing source region out to fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src18_src.reg
[Wed May 15 01:50:01 2013] Extracting stamp from image fullrun_mos1_xmm0109080501_pi300-10000_cl_sm2.00.img.gz, (306, 126) - (355, 175)
[Wed May 15 01:50:01 2013] XMMSAS bgd. selection expression = annulus(28707.162200, 13055.282200, 707.891020, 1415.782041, X, Y) && !ellipse(27500.599060, 13372.035889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30214.967180, 11668.163200, 403.586412, 403.586412, 0.000000, X, Y)
[Wed May 15 01:50:01 2013] Writing fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src18.gif
[Wed May 15 01:51:58 2013] Mean detx,y = (8747.91, 7004.31) 
[Wed May 15 01:51:59 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 15 01:52:12 2013] Binned source spectrum to 10 counts/bin
[Wed May 15 01:52:13 2013] Setting source spectrum file to fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed May 15 01:52:13 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed May 15 02:08:38 2013] Not generating rmf since there are only 82 counts
[Wed May 15 02:08:38 2013] rmf not generated due to insufficient counts
[Wed May 15 02:41:52 2013] Updating aperture counts using extracted products
[Wed May 15 02:41:52 2013] Total counts from fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 99.00
[Wed May 15 02:41:52 2013] Total counts from fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src18_bgd.pi.gz = 101.00
[Wed May 15 02:41:53 2013] Got source and background scale factors 299200.000000, 2883358.000000
[Wed May 15 02:41:53 2013] User source parameters:
  Position = (330.5, 150.6) = 14 16 50.55 44 47 1.4
  Extent = 7.1 (5.5-9.5)" x 3.8 (3.1-4.8)", rotation angle = 357 (340-11) degrees
  Source aperture counts = 88.5 +/- 11.0
  Background aperture counts = 10.5
  Rate = 0.004 +/- 0.0005

[Wed May 15 02:41:58 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 02:41:58 2013] Using photon index=1.80, rate=0.00341, arf fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src18.arf
[Wed May 15 02:41:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 02:41:58 2013] Updating source flux to 7.7e-14
[Wed May 15 02:42:08 2013] Flag b found in src. 18 procflags, skipping spectral fitting
[Wed May 15 02:42:08 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 15 02:42:10 2013] xmm0109080501/analysis//spectral/fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete