[Tue May 14 20:37:55 2013] Detection parameters:
  Position = (348.1, 134.6) = 14 16 43.39 44 45 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.1 +/- 8.6
  Background counts = 8.0
  Rate = 0.002 +/- 0.0004

[Tue May 14 20:37:56 2013] Off-axis axis estimate = 12.41'
[Tue May 14 21:50:24 2013] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Tue May 14 21:50:24 2013] Initial guess for spatial extent in simple fitting = 12.63"
[Tue May 14 21:50:24 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.906
[Tue May 14 21:50:24 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 12.63"
[Tue May 14 22:32:22 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_src23.ximg exists
[Tue May 14 22:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_src23.csv
[Tue May 14 22:32:22 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_src23_1.ximg exists
[Tue May 14 22:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_src23.csv
[Tue May 14 22:32:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 22:32:22 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Tue May 14 22:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src23.csv
[Tue May 14 22:32:22 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Tue May 14 22:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src23.csv
[Tue May 14 22:32:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109080501_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 23:08:24 2013] Warning, spatial fit 23 centroid is now closest to src. 18
[Tue May 14 23:08:24 2013] Vigneting correction estimate = 1.000000
[Tue May 14 23:08:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 23:08:24 2013] Assessing source extent using major
[Tue May 14 23:08:24 2013] Source does appear to be extended
[Tue May 14 23:08:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 23:47:13 2013] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Tue May 14 23:47:13 2013] Initial guess for spatial extent in simple fitting = 12.63"
[Tue May 14 23:47:13 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.906
[Tue May 14 23:47:13 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 12.63"
[Wed May 15 00:23:55 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass1_src22.ximg exists
[Wed May 15 00:23:55 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass1_src22_1.ximg exists
[Wed May 15 00:23:55 2013] Fit fullrun_mos1_xmm0109080501_pi300-10000_cl_pass1_src22 appears to have run properly
[Wed May 15 00:23:56 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Wed May 15 00:23:56 2013] fullrun_mos1_xmm0109080501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Wed May 15 00:23:56 2013] Fit fullrun_mos1_xmm0109080501_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Wed May 15 00:59:20 2013] Spatial fit model total counts = 121.674000, observed total counts = 114.000000
[Wed May 15 00:59:20 2013] Offset between fit and detection position for source 11 = 0.232025 pixels
[Wed May 15 00:59:20 2013] 122.621000 total counts/ 96.558300 bgd. counts: snr = 2.652312
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.232025 pixels
  Position = (347.9, 134.7) = 14 16 43.48 44 45 52.0
  Extent = 5.0 (3.2-7.8)", rotation angle = 0
  Source counts = 26.1 +/- 11.1
  Background counts = 96.6
  Rate = 0.001 +/- 0.0005
[Wed May 15 00:59:20 2013] Vigneting correction estimate = 1.000000
[Wed May 15 00:59:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 00:59:20 2013] Assessing source extent using major axis lower bound
[Wed May 15 00:59:20 2013] Source does appear to be extended
[Wed May 15 00:59:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 01:50:01 2013] XMMSAS src. selection expression = ellipse(30214.967180, 11668.163200, 302.689809, 302.689809, 0.000000, X, Y)
[Wed May 15 01:50:01 2013] Writing source region out to fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src11_src.reg
[Wed May 15 01:50:01 2013] Extracting stamp from image fullrun_mos1_xmm0109080501_pi300-10000_cl_sm2.00.img.gz, (330, 117) - (365, 152)
[Wed May 15 01:50:01 2013] XMMSAS bgd. selection expression = annulus(30214.967180, 11668.163200, 504.483015, 1008.966029, X, Y) && !ellipse(28707.162200, 13055.282200, 566.312816, 306.092009, 356.598090, X, Y) && !ellipse(31556.061200, 12687.678100, 533.579215, 249.526407, 319.841300, X, Y)
[Wed May 15 01:50:01 2013] Writing fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src11.gif
[Wed May 15 01:59:04 2013] Mean detx,y = (10800.26, 7152.13) 
[Wed May 15 01:59:06 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 15 01:59:21 2013] Binned source spectrum to 10 counts/bin
[Wed May 15 01:59:22 2013] Setting source spectrum file to fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed May 15 01:59:22 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed May 15 02:11:08 2013] Not generating rmf since there are only 26 counts
[Wed May 15 02:11:08 2013] rmf not generated due to insufficient counts
[Wed May 15 02:41:57 2013] Updating aperture counts using extracted products
[Wed May 15 02:41:57 2013] Total counts from fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 38.00
[Wed May 15 02:41:57 2013] Total counts from fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src11_bgd.pi.gz = 81.00
[Wed May 15 02:41:57 2013] Got source and background scale factors 288000.000000, 2082698.000000
[Wed May 15 02:41:57 2013] User source parameters:
  Position = (347.9, 134.7) = 14 16 43.48 44 45 52.0
  Extent = 5.0 (3.2-7.8)", rotation angle = 0
  Source aperture counts = 26.8 +/- 7.2
  Background aperture counts = 11.2
  Rate = 0.001 +/- 0.0003

[Wed May 15 02:41:59 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 02:41:59 2013] Using photon index=1.80, rate=0.00107, arf fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src11.arf
[Wed May 15 02:41:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 02:41:59 2013] Updating source flux to 2.6e-14
[Wed May 15 02:42:08 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 15 02:42:10 2013] xmm0109080501/analysis//spectral/fullrun_mos1_xmm0109080501_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete