[Thu Jun 14 00:53:03 2012] Detection parameters:
  Position = (260.8, 402.0) = 13 54 49.20 18 11 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 241.5 +/- 20.3
  Background counts = 27.0
  Rate = 0.03 +/- 0.003

[Thu Jun 14 00:53:03 2012] Off-axis axis estimate = 7.99'
[Thu Jun 14 00:54:41 2012] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 00:54:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 00:54:41 2012] Initial guess for spatial extent in simple fitting = 10.42"
[Thu Jun 14 00:54:41 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.073
[Thu Jun 14 00:54:41 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.42"
[Thu Jun 14 01:06:14 2012] fullrun_pn_xmm0109080401_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jun 14 01:06:14 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109080401_pi300-10000_cl_pass0_src2.csv
[Thu Jun 14 01:06:14 2012] fullrun_pn_xmm0109080401_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jun 14 01:06:14 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109080401_pi300-10000_cl_pass0_src2.csv
[Thu Jun 14 01:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109080401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109080401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 01:06:14 2012] fullrun_pn_xmm0109080401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jun 14 01:06:14 2012] fullrun_pn_xmm0109080401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jun 14 01:06:14 2012] Fit fullrun_pn_xmm0109080401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Jun 14 01:26:59 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.737218 pixels away
[Thu Jun 14 01:26:59 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 01:26:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 01:26:59 2012] Assessing source extent using major
[Thu Jun 14 01:26:59 2012] Source does appear to be extended
[Thu Jun 14 01:26:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 01:27:07 2012] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 01:27:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 01:27:07 2012] Initial guess for spatial extent in simple fitting = 10.42"
[Thu Jun 14 01:27:07 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.073
[Thu Jun 14 01:27:07 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.42"
[Thu Jun 14 01:38:32 2012] fullrun_pn_xmm0109080401_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jun 14 01:38:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080401_pi300-10000_cl_pass1_src2.csv
[Thu Jun 14 01:38:32 2012] fullrun_pn_xmm0109080401_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jun 14 01:38:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080401_pi300-10000_cl_pass1_src2.csv
[Thu Jun 14 01:38:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109080401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109080401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 01:38:32 2012] fullrun_pn_xmm0109080401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jun 14 01:38:32 2012] fullrun_pn_xmm0109080401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jun 14 01:38:32 2012] Fit fullrun_pn_xmm0109080401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Jun 14 01:57:16 2012] Spatial fit model total counts = 376.783000, observed total counts = 378.000000
[Thu Jun 14 01:57:16 2012] Offset between fit and detection position for source 2 = 0.331820 pixels
[Thu Jun 14 01:57:16 2012] 378.050000 total counts/ 220.856000 bgd. counts: snr = 10.577459
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.331820 pixels
  Position = (260.5, 401.9) = 13 54 49.29 18 11 5.3
  Extent = 5.6 (4.8-6.4)", rotation angle = 0
  Source counts = 157.2 +/- 19.4
  Background counts = 220.9
  Rate = 0.02 +/- 0.002
[Thu Jun 14 01:57:16 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 01:57:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 01:57:16 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 01:57:16 2012] Source does appear to be extended
[Thu Jun 14 01:57:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 01:57:24 2012] XMMSAS src. selection expression = ellipse(22611.097600, 34914.335600, 337.999210, 337.999210, 0.000000, X, Y)
[Thu Jun 14 01:57:24 2012] Writing source region out to fullrun_pn_xmm0109080401_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 14 01:57:24 2012] Extracting stamp from image fullrun_pn_xmm0109080401_pi300-10000_cl_sm2.00.img.gz, (241, 382) - (280, 421)
[Thu Jun 14 01:57:24 2012] XMMSAS bgd. selection expression = annulus(22611.097600, 34914.335600, 563.332016, 1126.664032, X, Y)
[Thu Jun 14 01:57:24 2012] Writing fullrun_pn_xmm0109080401_pi300-10000_pass1_cl_src2.gif
[Thu Jun 14 02:03:12 2012] Mean detx,y = (-1115.49, -8113.55) 
[Thu Jun 14 02:03:14 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 02:03:22 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 02:03:23 2012] Setting source spectrum file to fullrun_pn_xmm0109080401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 14 02:03:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109080401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 14 04:18:36 2012] Updating aperture counts using extracted products
[Thu Jun 14 04:18:36 2012] Error reading totcts from fullrun_pn_xmm0109080401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 14 04:18:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 04:18:37 2012] Using photon index=1.80, rate=0.0156, arf fullrun_pn_xmm0109080401_pi300-10000_pass1_cl_src2.arf
[Thu Jun 14 04:18:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 04:18:37 2012] Updating source flux to 7.1e-14
[Thu Jun 14 04:19:14 2012] Reading fit data from xmm0109080401/analysis//spectral/fullrun_pn_xmm0109080401_pi300-10000_pass1_cl_src2_pl.csv
[Thu Jun 14 04:19:14 2012] Spectral fit parameter nH value = 2.88551e+12
[Thu Jun 14 04:19:14 2012] Spectral fit parameter PhoIndex value = 1.94483
[Thu Jun 14 04:19:14 2012] Failed to get F(0.3-8.0) from xmm0109080401/analysis//spectral/fullrun_pn_xmm0109080401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Jun 14 04:19:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 04:19:14 2012] Using Nh = 2.9e+12, photon index=1.94, rate=0.0156, arf fullrun_pn_xmm0109080401_pi300-10000_pass1_cl_src2.arf
[Thu Jun 14 04:19:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 04:19:14 2012] Updating source flux to 6.4e-14