[Thu Jun 14 00:53:38 2012] Detection parameters:
  Position = (304.8, 321.3) = 13 54 35.76 18 5 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8097.4 +/- 106.1
  Background counts = 20.1
  Rate = 0.6 +/- 0.007

[Thu Jun 14 00:53:39 2012] Off-axis axis estimate = 1.72'
[Thu Jun 14 01:16:03 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 01:16:03 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Jun 14 01:16:03 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu Jun 14 01:16:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Jun 14 01:26:56 2012] fullrun_mos2_xmm0109080401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 14 01:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080401_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 01:26:56 2012] fullrun_mos2_xmm0109080401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 14 01:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080401_pi300-10000_cl_pass0_src1.csv
[Thu Jun 14 01:26:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 01:26:56 2012] fullrun_mos2_xmm0109080401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 14 01:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 14 01:26:56 2012] fullrun_mos2_xmm0109080401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 14 01:26:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 14 01:26:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 01:27:02 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.143683 pixels away
[Thu Jun 14 01:27:02 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 01:27:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 01:27:02 2012] Assessing source extent using major
[Thu Jun 14 01:27:02 2012] Source does appear to be extended
[Thu Jun 14 01:27:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 01:46:38 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 01:46:38 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Jun 14 01:46:38 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu Jun 14 01:46:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Thu Jun 14 01:57:13 2012] fullrun_mos2_xmm0109080401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 14 01:57:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080401_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 01:57:13 2012] fullrun_mos2_xmm0109080401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 14 01:57:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080401_pi300-10000_cl_pass1_src1.csv
[Thu Jun 14 01:57:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 01:57:13 2012] fullrun_mos2_xmm0109080401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 14 01:57:13 2012] fullrun_mos2_xmm0109080401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 14 01:57:13 2012] Fit fullrun_mos2_xmm0109080401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 14 01:57:19 2012] Spatial fit model total counts = 6715.830000, observed total counts = 6485.000000
[Thu Jun 14 01:57:19 2012] Offset between fit and detection position for source 1 = 0.277447 pixels
[Thu Jun 14 01:57:19 2012] 6742.420000 total counts/ 1733.030000 bgd. counts: snr = 120.332185
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.277447 pixels
  Position = (304.6, 321.5) = 13 54 35.82 18 5 15.5
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 5009.4 +/- 82.1
  Background counts = 1733.0
  Rate = 0.4 +/- 0.007
[Thu Jun 14 01:57:19 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 01:57:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 01:57:19 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 01:57:19 2012] Source does appear to be extended
[Thu Jun 14 01:57:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 04:11:53 2012] Counts = 5009.390000, rescaling region sizes by 2.000000
[Thu Jun 14 04:11:53 2012] XMMSAS src. selection expression = ellipse(26452.052800, 27917.901200, 631.706418, 631.706418, 0.000000, X, Y)
[Thu Jun 14 04:11:53 2012] Writing source region out to fullrun_mos2_xmm0109080401_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 14 04:11:53 2012] Extracting stamp from image fullrun_mos2_xmm0109080401_pi300-10000_cl_sm2.00.img.gz, (268, 285) - (341, 358)
[Thu Jun 14 04:11:53 2012] XMMSAS bgd. selection expression = annulus(26452.052800, 27917.901200, 2105.688061, 4211.376121, X, Y) && !ellipse(25235.930756, 28905.794556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28603.582400, 26378.287800, 1510.352043, 604.108017, 356.614124, X, Y)
[Thu Jun 14 04:11:53 2012] Writing fullrun_mos2_xmm0109080401_pi300-10000_pass1_cl_src1.gif
[Thu Jun 14 04:11:55 2012] Mean detx,y = (27.79, 83.64) 
[Thu Jun 14 04:11:56 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 04:12:31 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 04:12:31 2012] Setting source spectrum file to fullrun_mos2_xmm0109080401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 14 04:12:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109080401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 14 04:18:37 2012] Updating aperture counts using extracted products
[Thu Jun 14 04:18:37 2012] Error reading totcts from fullrun_mos2_xmm0109080401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 14 04:18:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 04:18:37 2012] Using photon index=1.80, rate=0.435, arf fullrun_mos2_xmm0109080401_pi300-10000_pass1_cl_src1.arf
[Thu Jun 14 04:18:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 04:18:37 2012] Updating source flux to 4.7e-12
[Thu Jun 14 04:19:09 2012] Reading fit data from xmm0109080401/analysis//spectral/fullrun_mos2_xmm0109080401_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun 14 04:19:09 2012] Spectral fit parameter nH value = 4.18543e+12
[Thu Jun 14 04:19:09 2012] Spectral fit parameter PhoIndex value = 2.3126
[Thu Jun 14 04:19:09 2012] Failed to get F(0.3-8.0) from xmm0109080401/analysis//spectral/fullrun_mos2_xmm0109080401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun 14 04:19:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 04:19:09 2012] Using Nh = 4.2e+12, photon index=2.31, rate=0.435, arf fullrun_mos2_xmm0109080401_pi300-10000_pass1_cl_src1.arf
[Thu Jun 14 04:19:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 04:19:09 2012] Updating source flux to 3.9e-12