[Thu Jun 14 00:53:20 2012] Detection parameters:
  Position = (378.2, 433.6) = 13 54 13.33 18 13 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.1 +/- 14.7
  Background counts = 14.3
  Rate = 0.02 +/- 0.002

[Thu Jun 14 00:53:20 2012] Off-axis axis estimate = 11.38'
[Thu Jun 14 01:06:14 2012] Using EEF radius (= 12.12 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 01:06:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 01:06:14 2012] Initial guess for spatial extent in simple fitting = 12.12"
[Thu Jun 14 01:06:14 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.134
[Thu Jun 14 01:06:14 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.12"
[Thu Jun 14 01:16:02 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 14 01:16:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_src3.csv
[Thu Jun 14 01:16:02 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 14 01:16:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_src3.csv
[Thu Jun 14 01:16:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 01:16:03 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 14 01:16:03 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 14 01:16:03 2012] Fit fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jun 14 01:27:00 2012] Spatial fit model total counts = 151.000000, observed total counts = 151.000000
[Thu Jun 14 01:27:00 2012] Offset between fit and detection position for source 5 = 0.264843 pixels
[Thu Jun 14 01:27:00 2012] 151.494300 total counts/ 71.387800 bgd. counts: snr = 9.481035
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.264843 pixels
  Position = (378.1, 433.4) = 13 54 13.38 18 13 22.5
  Extent = 5.9 (4.3-7.4)", rotation angle = 0
  Source counts = 80.1 +/- 12.3
  Background counts = 71.4
  Rate = 0.007 +/- 0.001
[Thu Jun 14 01:27:00 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 01:27:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 01:27:00 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 01:27:00 2012] Source does appear to be extended
[Thu Jun 14 01:27:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 01:38:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 01:38:32 2012] Initial guess for spatial extent in simple fitting = 5.94"
[Thu Jun 14 01:38:32 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.861
[Thu Jun 14 01:38:32 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.94"
[Thu Jun 14 01:46:38 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 14 01:46:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_src3.csv
[Thu Jun 14 01:46:38 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 14 01:46:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_src3.csv
[Thu Jun 14 01:46:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 01:46:38 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 14 01:46:38 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 14 01:46:38 2012] Fit fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jun 14 01:57:17 2012] Spatial fit model total counts = 138.000000, observed total counts = 138.000000
[Thu Jun 14 01:57:17 2012] Offset between fit and detection position for source 5 = 0.048040 pixels
[Thu Jun 14 01:57:17 2012] 140.138300 total counts/ 57.427700 bgd. counts: snr = 10.914415
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.048040 pixels
  Position = (378.0, 433.4) = 13 54 13.39 18 13 22.4
  Extent = 6.1 (4.6-7.7)", rotation angle = 0
  Source counts = 82.7 +/- 11.8
  Background counts = 57.4
  Rate = 0.007 +/- 0.001
[Thu Jun 14 01:57:17 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 01:57:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 01:57:17 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 01:57:17 2012] Source does appear to be extended
[Thu Jun 14 01:57:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 04:00:18 2012] XMMSAS src. selection expression = ellipse(32841.728120, 37656.507200, 367.610642, 367.610642, 0.000000, X, Y)
[Thu Jun 14 04:00:18 2012] Writing source region out to fullrun_mos1_xmm0109080401_pi300-10000_pass1_cl_src5_src.reg
[Thu Jun 14 04:00:18 2012] Extracting stamp from image fullrun_mos1_xmm0109080401_pi300-10000_cl_sm2.00.img.gz, (357, 412) - (399, 455)
[Thu Jun 14 04:00:18 2012] XMMSAS bgd. selection expression = annulus(32841.728120, 37656.507200, 612.684404, 1225.368808, X, Y)
[Thu Jun 14 04:00:18 2012] Writing fullrun_mos1_xmm0109080401_pi300-10000_pass1_cl_src5.gif
[Thu Jun 14 04:01:09 2012] Mean detx,y = (7321.08, 9102.15) 
[Thu Jun 14 04:01:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 04:01:18 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 04:01:18 2012] Setting source spectrum file to fullrun_mos1_xmm0109080401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 14 04:01:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109080401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jun 14 04:11:12 2012] Not generating rmf since there are only 82 counts
[Thu Jun 14 04:11:12 2012] rmf not generated due to insufficient counts
[Thu Jun 14 04:18:37 2012] Updating aperture counts using extracted products
[Thu Jun 14 04:18:37 2012] Error reading totcts from fullrun_mos1_xmm0109080401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 14 04:18:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 04:18:37 2012] Using photon index=1.80, rate=0.00722, arf fullrun_mos1_xmm0109080401_pi300-10000_pass1_cl_src5.arf
[Thu Jun 14 04:18:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 04:18:37 2012] Updating source flux to 1.4e-13
[Thu Jun 14 04:18:38 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting