[Thu Jun 14 00:53:20 2012] Detection parameters:
  Position = (253.9, 433.8) = 13 54 51.30 18 13 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 265.1 +/- 20.5
  Background counts = 13.9
  Rate = 0.03 +/- 0.003

[Thu Jun 14 00:53:20 2012] Off-axis axis estimate = 10.33'
[Thu Jun 14 01:06:14 2012] Using EEF radius (= 11.60 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 01:06:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 01:06:14 2012] Initial guess for spatial extent in simple fitting = 11.60"
[Thu Jun 14 01:06:14 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.898
[Thu Jun 14 01:06:14 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.60"
[Thu Jun 14 01:16:02 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jun 14 01:16:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_src2.csv
[Thu Jun 14 01:16:02 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jun 14 01:16:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_src2.csv
[Thu Jun 14 01:16:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 01:16:03 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jun 14 01:16:03 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jun 14 01:16:03 2012] Fit fullrun_mos1_xmm0109080401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Jun 14 01:27:00 2012] Spatial fit model total counts = 305.490000, observed total counts = 306.000000
[Thu Jun 14 01:27:00 2012] Offset between fit and detection position for source 2 = 0.331301 pixels
[Thu Jun 14 01:27:00 2012] 306.052000 total counts/ 112.141000 bgd. counts: snr = 18.311345
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.331301 pixels
  Position = (253.8, 433.5) = 13 54 51.32 18 13 22.9
  Extent = 7.9 (6.8-9.2)", rotation angle = 0
  Source counts = 193.9 +/- 17.5
  Background counts = 112.1
  Rate = 0.02 +/- 0.002
[Thu Jun 14 01:27:00 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 01:27:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 01:27:00 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 01:27:00 2012] Source does appear to be extended
[Thu Jun 14 01:27:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 01:38:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 01:38:32 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Thu Jun 14 01:38:32 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.158
[Thu Jun 14 01:38:32 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.93"
[Thu Jun 14 01:46:38 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jun 14 01:46:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_src2.csv
[Thu Jun 14 01:46:38 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jun 14 01:46:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_src2.csv
[Thu Jun 14 01:46:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 01:46:38 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jun 14 01:46:38 2012] fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jun 14 01:46:38 2012] Fit fullrun_mos1_xmm0109080401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Jun 14 01:57:17 2012] Spatial fit model total counts = 304.000000, observed total counts = 304.000000
[Thu Jun 14 01:57:17 2012] Offset between fit and detection position for source 2 = 0.038043 pixels
[Thu Jun 14 01:57:17 2012] 305.939000 total counts/ 110.273000 bgd. counts: snr = 18.632914
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.038043 pixels
  Position = (253.8, 433.5) = 13 54 51.33 18 13 22.8
  Extent = 8.0 (6.8-9.2)", rotation angle = 0
  Source counts = 195.7 +/- 17.5
  Background counts = 110.3
  Rate = 0.02 +/- 0.002
[Thu Jun 14 01:57:17 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 01:57:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 01:57:17 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 01:57:17 2012] Source does appear to be extended
[Thu Jun 14 01:57:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 04:00:18 2012] XMMSAS src. selection expression = ellipse(22032.193780, 37663.653800, 480.829214, 480.829214, 0.000000, X, Y)
[Thu Jun 14 04:00:18 2012] Writing source region out to fullrun_mos1_xmm0109080401_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 14 04:00:18 2012] Extracting stamp from image fullrun_mos1_xmm0109080401_pi300-10000_cl_sm2.00.img.gz, (226, 406) - (281, 461)
[Thu Jun 14 04:00:18 2012] XMMSAS bgd. selection expression = annulus(22032.193780, 37663.653800, 801.382023, 1602.764046, X, Y)
[Thu Jun 14 04:00:18 2012] Writing fullrun_mos1_xmm0109080401_pi300-10000_pass1_cl_src2.gif
[Thu Jun 14 04:00:59 2012] Mean detx,y = (10966.19, -1085.05) 
[Thu Jun 14 04:00:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 04:01:07 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 04:01:07 2012] Setting source spectrum file to fullrun_mos1_xmm0109080401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 14 04:01:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109080401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 14 04:18:37 2012] Updating aperture counts using extracted products
[Thu Jun 14 04:18:37 2012] Error reading totcts from fullrun_mos1_xmm0109080401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 14 04:18:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 04:18:37 2012] Using photon index=1.80, rate=0.0171, arf fullrun_mos1_xmm0109080401_pi300-10000_pass1_cl_src2.arf
[Thu Jun 14 04:18:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 04:18:37 2012] Updating source flux to 3.3e-13