[Sun Aug  5 10:12:21 2012] Detection parameters:
  Position = (283.9, 331.6) = 13 23 51.21 65 42 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.8 +/- 9.1
  Background counts = 8.5
  Rate = 0.003 +/- 0.0009

[Sun Aug  5 10:12:21 2012] Off-axis axis estimate = 2.62'
[Sun Aug  5 10:49:41 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 10:49:41 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Sun Aug  5 10:49:41 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.674
[Sun Aug  5 10:49:41 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.74"
[Sun Aug  5 11:08:47 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_src8.ximg exists
[Sun Aug  5 11:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_src8.csv
[Sun Aug  5 11:08:47 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Aug  5 11:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_src8.csv
[Sun Aug  5 11:08:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 11:08:47 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Aug  5 11:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Aug  5 11:08:47 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Aug  5 11:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Aug  5 11:08:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 11:08:53 2012] Source 8 is offset by -1.569484 and 6.710557 pixels which is larger than
2 X fitted extent = 6.452966 x 6.452966, not incorporating fit results
[Sun Aug  5 11:08:53 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 11:08:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 11:08:53 2012] Assessing source extent using major
[Sun Aug  5 11:08:53 2012] Source does appear to be extended
[Sun Aug  5 11:08:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 11:24:52 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 11:24:52 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Sun Aug  5 11:24:52 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.674
[Sun Aug  5 11:24:52 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.74"
[Sun Aug  5 11:35:50 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass1_src7.ximg exists
[Sun Aug  5 11:35:50 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Aug  5 11:35:50 2012] Fit fullrun_mos2_xmm0109080301_pi300-10000_cl_pass1_src7 appears to have run properly
[Sun Aug  5 11:35:50 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Aug  5 11:35:50 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Aug  5 11:35:50 2012] Fit fullrun_mos2_xmm0109080301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Aug  5 11:35:54 2012] Spatial fit model total counts = 295.047000, observed total counts = 322.000000
[Sun Aug  5 11:35:54 2012] Offset between fit and detection position for source 8 = 5.107667 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 5.107667 pixels
  Position = (278.8, 331.9) = 13 23 54.81 65 42 44.1
  Extent = 15.5 (15.4-31.0)", rotation angle = 0
  Source counts = 282.1 +/- 16.8
  Background counts = 0.0
  Rate = 0.02 +/- 0.001
[Sun Aug  5 11:35:54 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 11:35:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 11:35:54 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 11:35:54 2012] Source does appear to be extended
[Sun Aug  5 11:35:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 12:21:46 2012] XMMSAS src. selection expression = ellipse(24211.384000, 28824.426620, 928.824027, 928.824027, 0.000000, X, Y)
[Sun Aug  5 12:21:46 2012] Writing source region out to fullrun_mos2_xmm0109080301_pi300-10000_pass1_cl_src8_src.reg
[Sun Aug  5 12:21:46 2012] Extracting stamp from image fullrun_mos2_xmm0109080301_pi300-10000_cl_sm2.00.img.gz, (225, 278) - (332, 385)
[Sun Aug  5 12:21:46 2012] XMMSAS bgd. selection expression = annulus(24211.384000, 28824.426620, 1548.040045, 3096.080089, X, Y) && !ellipse(24850.989940, 27699.933800, 418.023212, 418.023212, 0.000000, X, Y) && !ellipse(27562.773000, 29789.788600, 383.475211, 383.475211, 0.000000, X, Y)
[Sun Aug  5 12:21:46 2012] Writing fullrun_mos2_xmm0109080301_pi300-10000_pass1_cl_src8.gif
[Sun Aug  5 12:23:48 2012] Mean detx,y = (-508.81, 834.20) 
[Sun Aug  5 12:23:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 12:24:10 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 12:24:10 2012] Setting source spectrum file to fullrun_mos2_xmm0109080301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Aug  5 12:24:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109080301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Aug  5 12:37:21 2012] Updating aperture counts using extracted products
[Sun Aug  5 12:37:21 2012] Error reading totcts from fullrun_mos2_xmm0109080301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Aug  5 12:37:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 12:37:21 2012] Using photon index=1.80, rate=0.0246, arf fullrun_mos2_xmm0109080301_pi300-10000_pass1_cl_src8.arf
[Sun Aug  5 12:37:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 12:37:21 2012] Updating source flux to 2.8e-13
[Sun Aug  5 12:37:31 2012] Flag b found in src. 8 procflags, skipping spectral fitting