[Sun Aug  5 10:12:21 2012] Detection parameters:
  Position = (286.4, 319.0) = 13 23 49.51 65 41 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7587.5 +/- 103.3
  Background counts = 9.1
  Rate = 0.7 +/- 0.009

[Sun Aug  5 10:12:21 2012] Off-axis axis estimate = 1.73'
[Sun Aug  5 10:49:41 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Aug  5 10:49:41 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Aug  5 10:49:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Sun Aug  5 10:49:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Aug  5 11:08:46 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug  5 11:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_src1.csv
[Sun Aug  5 11:08:46 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug  5 11:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_src1.csv
[Sun Aug  5 11:08:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 11:08:47 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug  5 11:08:47 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug  5 11:08:47 2012] Fit fullrun_mos2_xmm0109080301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug  5 11:08:53 2012] Spatial fit model total counts = 6704.170000, observed total counts = 6523.000000
[Sun Aug  5 11:08:53 2012] Offset between fit and detection position for source 1 = 0.153553 pixels
[Sun Aug  5 11:08:53 2012] 6750.650000 total counts/ 1643.120000 bgd. counts: snr = 126.001665
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.153553 pixels
  Position = (286.2, 318.9) = 13 23 49.62 65 41 47.9
  Extent = 5.2 (5.1-5.4)", rotation angle = 0
  Source counts = 5107.5 +/- 82.2
  Background counts = 1643.1
  Rate = 0.4 +/- 0.007
[Sun Aug  5 11:08:53 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 11:08:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 11:08:53 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 11:08:53 2012] Source does appear to be extended
[Sun Aug  5 11:08:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 11:24:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug  5 11:24:52 2012] Initial guess for spatial extent in simple fitting = 5.25"
[Sun Aug  5 11:24:52 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.374
[Sun Aug  5 11:24:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.25"
[Sun Aug  5 11:35:50 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug  5 11:35:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080301_pi300-10000_cl_pass1_src1.csv
[Sun Aug  5 11:35:50 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug  5 11:35:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080301_pi300-10000_cl_pass1_src1.csv
[Sun Aug  5 11:35:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 11:35:50 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug  5 11:35:50 2012] fullrun_mos2_xmm0109080301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug  5 11:35:50 2012] Fit fullrun_mos2_xmm0109080301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug  5 11:35:54 2012] Spatial fit model total counts = 6713.020000, observed total counts = 6523.000000
[Sun Aug  5 11:35:54 2012] Offset between fit and detection position for source 1 = 0.002344 pixels
[Sun Aug  5 11:35:54 2012] 6758.810000 total counts/ 1661.410000 bgd. counts: snr = 125.057662
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.002344 pixels
  Position = (286.2, 318.9) = 13 23 49.62 65 41 47.9
  Extent = 5.2 (5.1-5.4)", rotation angle = 0
  Source counts = 5097.4 +/- 82.2
  Background counts = 1661.4
  Rate = 0.4 +/- 0.007
[Sun Aug  5 11:35:54 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 11:35:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 11:35:54 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 11:35:54 2012] Source does appear to be extended
[Sun Aug  5 11:35:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 12:21:46 2012] Counts = 5097.400000, rescaling region sizes by 2.000000
[Sun Aug  5 12:21:46 2012] XMMSAS src. selection expression = ellipse(24850.989940, 27699.933800, 627.034818, 627.034818, 0.000000, X, Y)
[Sun Aug  5 12:21:46 2012] Writing source region out to fullrun_mos2_xmm0109080301_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug  5 12:21:46 2012] Extracting stamp from image fullrun_mos2_xmm0109080301_pi300-10000_cl_sm2.00.img.gz, (250, 283) - (322, 355)
[Sun Aug  5 12:21:46 2012] XMMSAS bgd. selection expression = annulus(24850.989940, 27699.933800, 2090.116060, 4180.232120, X, Y) && !ellipse(27562.773000, 29789.788600, 383.475211, 383.475211, 0.000000, X, Y) && !ellipse(24211.384000, 28824.426620, 1238.432036, 1238.432036, 0.000000, X, Y)
[Sun Aug  5 12:21:46 2012] Writing fullrun_mos2_xmm0109080301_pi300-10000_pass1_cl_src1.gif
[Sun Aug  5 12:21:48 2012] Mean detx,y = (52.56, 103.49) 
[Sun Aug  5 12:21:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 12:22:44 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 12:22:44 2012] Setting source spectrum file to fullrun_mos2_xmm0109080301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 12:22:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109080301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug  5 12:37:21 2012] Updating aperture counts using extracted products
[Sun Aug  5 12:37:21 2012] Error reading totcts from fullrun_mos2_xmm0109080301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 12:37:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 12:37:21 2012] Using photon index=1.80, rate=0.444, arf fullrun_mos2_xmm0109080301_pi300-10000_pass1_cl_src1.arf
[Sun Aug  5 12:37:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 12:37:21 2012] Updating source flux to 4.8e-12
[Sun Aug  5 12:37:50 2012] Reading fit data from xmm0109080301/analysis//spectral/fullrun_mos2_xmm0109080301_pi300-10000_pass1_cl_src1_pl.csv
[Sun Aug  5 12:37:50 2012] Spectral fit parameter nH value = 2.58952e+14
[Sun Aug  5 12:37:50 2012] Spectral fit parameter PhoIndex value = 2.61086
[Sun Aug  5 12:37:50 2012] Failed to get F(0.3-8.0) from xmm0109080301/analysis//spectral/fullrun_mos2_xmm0109080301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Aug  5 12:37:50 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 12:37:50 2012] Using Nh = 2.6e+14, photon index=2.61, rate=0.444, arf fullrun_mos2_xmm0109080301_pi300-10000_pass1_cl_src1.arf
[Sun Aug  5 12:37:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 12:37:50 2012] Updating source flux to 3.7e-12