[Tue Jun 11 15:11:43 2013] Detection parameters:
  Position = (309.2, 208.8) = 13 12 13.51 35 7 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 411.0 +/- 24.8
  Background counts = 9.6
  Rate = 0.02 +/- 0.001

[Tue Jun 11 15:11:44 2013] Off-axis axis estimate = 6.55'
[Tue Jun 11 15:12:01 2013] Using EEF radius (= 9.70 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 15:12:01 2013] Initial guess for spatial extent in simple fitting = 9.70"
[Tue Jun 11 15:12:01 2013] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.905
[Tue Jun 11 15:12:01 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 9.70"
[Tue Jun 11 15:12:01 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun 11 15:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_src2.csv
[Tue Jun 11 15:12:01 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun 11 15:12:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_src2.csv
[Tue Jun 11 15:12:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 15:12:01 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun 11 15:12:01 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun 11 15:12:01 2013] Fit fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jun 11 15:12:12 2013] Spatial fit model total counts = 472.426000, observed total counts = 473.000000
[Tue Jun 11 15:12:12 2013] Offset between fit and detection position for source 3 = 0.302067 pixels
[Tue Jun 11 15:12:12 2013] 476.611000 total counts/ 212.413000 bgd. counts: snr = 18.127544
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.302067 pixels
  Position = (309.3, 209.0) = 13 12 13.45 35 7 8.5
  Extent = 4.6 (3.8-5.5)", rotation angle = 0
  Source counts = 264.2 +/- 21.8
  Background counts = 212.4
  Rate = 0.009 +/- 0.0008
[Tue Jun 11 15:12:12 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 15:12:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 15:12:12 2013] Assessing source extent using major axis lower bound
[Tue Jun 11 15:12:12 2013] Source does appear to be extended
[Tue Jun 11 15:12:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 15:12:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 11 15:12:20 2013] Initial guess for spatial extent in simple fitting = 4.56"
[Tue Jun 11 15:12:20 2013] source mask rpix=1.0, npix_max = 9, mask sum = 11, frac = 1.147
[Tue Jun 11 15:12:20 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 4.56"
[Tue Jun 11 15:12:20 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jun 11 15:12:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_src2.csv
[Tue Jun 11 15:12:20 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jun 11 15:12:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_src2.csv
[Tue Jun 11 15:12:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 15:12:20 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jun 11 15:12:20 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jun 11 15:12:20 2013] Fit fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jun 11 15:12:28 2013] Spatial fit model total counts = 473.547000, observed total counts = 473.000000
[Tue Jun 11 15:12:28 2013] Offset between fit and detection position for source 3 = 0.005633 pixels
[Tue Jun 11 15:12:28 2013] 477.846000 total counts/ 215.274000 bgd. counts: snr = 17.895862
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.005633 pixels
  Position = (309.3, 209.0) = 13 12 13.45 35 7 8.5
  Extent = 4.5 (3.8-5.5)", rotation angle = 0
  Source counts = 262.6 +/- 21.9
  Background counts = 215.3
  Rate = 0.009 +/- 0.0008
[Tue Jun 11 15:12:28 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 15:12:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 15:12:28 2013] Assessing source extent using major axis lower bound
[Tue Jun 11 15:12:28 2013] Source does appear to be extended
[Tue Jun 11 15:12:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 15:14:10 2013] XMMSAS src. selection expression = ellipse(26862.935000, 18135.305000, 268.317608, 268.317608, 0.000000, X, Y)
[Tue Jun 11 15:14:10 2013] Not overwriting source region fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 11 15:14:10 2013] Extracting stamp from image fullrun_mos2_xmm0109080201_pi300-10000_cl_sm2.00.img.gz, (294, 194) - (325, 224)
[Tue Jun 11 15:14:10 2013] XMMSAS bgd. selection expression = annulus(26862.935000, 18135.305000, 447.196013, 894.392026, X, Y)
[Tue Jun 11 15:14:10 2013] Writing fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src3.gif
[Tue Jun 11 15:14:11 2013] ../../xmm0109080201/products/events/fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0109080201/products/events/fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Jun 11 15:14:11 2013] Mean detx,y = (4996.40, -8481.61) 
[Tue Jun 11 15:14:11 2013] ../../xmm0109080201/products/images/fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src3_src.img and ../../xmm0109080201/products/images/fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Jun 11 15:14:11 2013] ../../xmm0109080201/products/spectra/fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src3_src.pi and ../../xmm0109080201/products/spectra/fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Jun 11 15:14:11 2013] Setting source spectrum file to fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src3_src.pi.gz
[Tue Jun 11 15:14:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 11 15:14:11 2013] ../../xmm0109080201/products/lightcurves/fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0109080201/products/lightcurves/fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Jun 11 15:17:30 2013] Updating aperture counts using extracted products
[Tue Jun 11 15:17:30 2013] Total counts from fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src3_src.pi.gz = 281.00
[Tue Jun 11 15:17:30 2013] Total counts from fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 131.00
[Tue Jun 11 15:17:30 2013] Got source and background scale factors 201400.000000, 1813840.000000
[Tue Jun 11 15:17:30 2013] User source parameters:
  Position = (309.3, 209.0) = 13 12 13.45 35 7 8.5
  Extent = 4.5 (3.8-5.5)", rotation angle = 0
  Source aperture counts = 266.5 +/- 17.8
  Background aperture counts = 14.5
  Rate = 0.009 +/- 0.0006

[Tue Jun 11 15:17:33 2013] No arf file for this source, not re-computing flux
[Tue Jun 11 15:17:36 2013] Source 3 has no response, skipping
[Tue Jun 11 15:17:37 2013] xmm0109080201/analysis//spectral/fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete