[Tue Jun 11 15:11:43 2013] Detection parameters:
  Position = (396.6, 368.7) = 13 11 42.44 35 18 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.7 +/- 9.7
  Background counts = 10.4
  Rate = 0.003 +/- 0.0005

[Tue Jun 11 15:11:44 2013] Off-axis axis estimate = 8.75'
[Tue Jun 11 15:12:01 2013] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 15:12:01 2013] Initial guess for spatial extent in simple fitting = 10.80"
[Tue Jun 11 15:12:01 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.011
[Tue Jun 11 15:12:01 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 10.80"
[Tue Jun 11 15:12:01 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_src13.ximg exists
[Tue Jun 11 15:12:01 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Jun 11 15:12:01 2013] Fit fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_src13 appears to have run properly
[Tue Jun 11 15:12:02 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Jun 11 15:12:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Jun 11 15:12:02 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Jun 11 15:12:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Jun 11 15:12:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080201_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 15:12:12 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 17.075865 pixels away
[Tue Jun 11 15:12:12 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 15:12:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 15:12:12 2013] Assessing source extent using major
[Tue Jun 11 15:12:12 2013] Source does appear to be extended
[Tue Jun 11 15:12:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 15:12:20 2013] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 15:12:20 2013] Initial guess for spatial extent in simple fitting = 10.80"
[Tue Jun 11 15:12:20 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.011
[Tue Jun 11 15:12:20 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 10.80"
[Tue Jun 11 15:12:20 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_src13.ximg exists
[Tue Jun 11 15:12:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_src13.csv
[Tue Jun 11 15:12:20 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Jun 11 15:12:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_src13.csv
[Tue Jun 11 15:12:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 15:12:21 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Jun 11 15:12:21 2013] fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Jun 11 15:12:21 2013] Fit fullrun_mos2_xmm0109080201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Jun 11 15:12:28 2013] Spatial fit model total counts = 133.877000, observed total counts = 134.000000
[Tue Jun 11 15:12:28 2013] Offset between fit and detection position for source 11 = 0.432945 pixels
[Tue Jun 11 15:12:28 2013] 133.015200 total counts/ 98.039200 bgd. counts: snr = 3.532403
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.432945 pixels
  Position = (396.1, 368.6) = 13 11 42.59 35 18 42.3
  Extent = 5.6 (3.7-8.2)", rotation angle = 0
  Source counts = 35.0 +/- 11.5
  Background counts = 98.0
  Rate = 0.001 +/- 0.0004
[Tue Jun 11 15:12:28 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 15:12:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 15:12:28 2013] Assessing source extent using major axis lower bound
[Tue Jun 11 15:12:28 2013] Source does appear to be extended
[Tue Jun 11 15:12:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 15:14:11 2013] XMMSAS src. selection expression = ellipse(34414.912400, 32018.320800, 334.807810, 334.807810, 0.000000, X, Y)
[Tue Jun 11 15:14:11 2013] Not overwriting source region fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src11_src.reg
[Tue Jun 11 15:14:11 2013] Extracting stamp from image fullrun_mos2_xmm0109080201_pi300-10000_cl_sm2.00.img.gz, (377, 349) - (415, 388)
[Tue Jun 11 15:14:11 2013] XMMSAS bgd. selection expression = annulus(34414.912400, 32018.320800, 558.013016, 1116.026032, X, Y)
[Tue Jun 11 15:14:11 2013] Writing fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src11.gif
[Tue Jun 11 15:14:23 2013] Mean detx,y = (-9267.96, -1677.72) 
[Tue Jun 11 15:14:24 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 15:14:31 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 15:14:31 2013] Setting source spectrum file to fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jun 11 15:14:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Jun 11 15:16:24 2013] Not generating rmf since there are only 34 counts
[Tue Jun 11 15:16:24 2013] rmf not generated due to insufficient counts
[Tue Jun 11 15:17:32 2013] Updating aperture counts using extracted products
[Tue Jun 11 15:17:32 2013] Total counts from fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 54.00
[Tue Jun 11 15:17:32 2013] Total counts from fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 135.00
[Tue Jun 11 15:17:32 2013] Got source and background scale factors 356800.000000, 2930380.000000
[Tue Jun 11 15:17:32 2013] User source parameters:
  Position = (396.1, 368.6) = 13 11 42.59 35 18 42.3
  Extent = 5.6 (3.7-8.2)", rotation angle = 0
  Source aperture counts = 37.6 +/- 8.4
  Background aperture counts = 16.4
  Rate = 0.001 +/- 0.0003

[Tue Jun 11 15:17:33 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 15:17:33 2013] Using photon index=1.80, rate=0.00121, arf fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src11.arf
[Tue Jun 11 15:17:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 15:17:33 2013] Updating source flux to 2.2e-14
[Tue Jun 11 15:17:36 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 11 15:17:37 2013] xmm0109080201/analysis//spectral/fullrun_mos2_xmm0109080201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete