[Wed Sep  5 13:07:14 2012] Detection parameters:
  Position = (298.9, 322.0) = 12 4 42.20 27 54 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37024.9 +/- 228.6
  Background counts = 30.6
  Rate = 3 +/- 0.02

[Wed Sep  5 13:07:15 2012] Off-axis axis estimate = 1.71'
[Wed Sep  5 13:08:58 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 13:08:58 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Sep  5 13:08:58 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Wed Sep  5 13:08:58 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.28"
[Wed Sep  5 13:49:33 2012] fullrun_pn_xmm0109080101_pi300-10000_cl_pass0_src2.ximg exists
[Wed Sep  5 13:49:33 2012] fullrun_pn_xmm0109080101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Sep  5 13:49:33 2012] Fit fullrun_pn_xmm0109080101_pi300-10000_cl_pass0_src2 appears to have run properly
[Wed Sep  5 13:49:34 2012] fullrun_pn_xmm0109080101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Sep  5 13:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Sep  5 13:49:34 2012] fullrun_pn_xmm0109080101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Sep  5 13:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Sep  5 13:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109080101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109080101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 14:34:17 2012] Spatial fit model total counts = 31870.400000, observed total counts = 31442.000000
[Wed Sep  5 14:34:17 2012] Offset between fit and detection position for source 2 = 0.070520 pixels
[Wed Sep  5 14:34:17 2012] 32019.710000 total counts/ 6505.510000 bgd. counts: snr = 316.330655
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.070520 pixels
  Position = (298.9, 322.0) = 12 4 42.22 27 54 10.2
  Extent = 5.8 (5.8-5.9)" x 5.8 (5.7-5.9)", rotation angle = 127 (90-347) degrees
  Source counts = 25514.2 +/- 178.9
  Background counts = 6505.5
  Rate = 2 +/- 0.01
[Wed Sep  5 14:34:17 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 14:34:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 14:34:17 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 14:34:17 2012] Source does appear to be extended
[Wed Sep  5 14:34:17 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Wed Sep  5 14:34:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 14:34:29 2012] Initial guess for spatial extent in simple fitting = 5.81"
[Wed Sep  5 14:34:29 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.188
[Wed Sep  5 14:34:29 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.81"
[Wed Sep  5 15:02:51 2012] fullrun_pn_xmm0109080101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Sep  5 15:02:51 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109080101_pi300-10000_cl_pass1_src2.csv
[Wed Sep  5 15:02:51 2012] fullrun_pn_xmm0109080101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Sep  5 15:02:51 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109080101_pi300-10000_cl_pass1_src2.csv
[Wed Sep  5 15:02:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109080101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109080101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 15:02:51 2012] fullrun_pn_xmm0109080101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Sep  5 15:02:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Sep  5 15:02:51 2012] fullrun_pn_xmm0109080101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Sep  5 15:02:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109080101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Sep  5 15:02:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109080101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109080101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 15:49:34 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Wed Sep  5 15:49:34 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 15:49:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 15:49:34 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 15:49:34 2012] Source does appear to be extended
[Wed Sep  5 15:49:34 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Wed Sep  5 15:49:44 2012] Counts = 25514.200000, rescaling region sizes by 3.000000
[Wed Sep  5 15:49:44 2012] XMMSAS src. selection expression = ellipse(25952.167400, 27965.943000, 1052.623830, 1037.725230, 126.723000, X, Y)
[Wed Sep  5 15:49:44 2012] Writing source region out to fullrun_pn_xmm0109080101_pi300-10000_pass1_cl_src2_src.reg
[Wed Sep  5 15:49:44 2012] Extracting stamp from image fullrun_pn_xmm0109080101_pi300-10000_cl_sm2.00.img.gz, (238, 262) - (359, 383)
[Wed Sep  5 15:49:44 2012] XMMSAS bgd. selection expression = annulus(25952.167400, 27965.943000, 5263.119151, 10526.238303, X, Y) && !ellipse(24973.090820, 28722.361237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16787.851883, 26321.938629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19345.368591, 23339.812378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36376.371860, 36505.375000, 510.362415, 331.888810, 64.606682, X, Y) && !ellipse(30763.762817, 36109.430664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29363.850120, 33133.838000, 390.889611, 390.889611, 0.000000, X, Y) && !ellipse(16090.716858, 31812.154236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32107.953600, 29886.562400, 408.874412, 408.874412, 0.000000, X, Y) && !ellipse(31327.290131, 29364.671234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20169.406052, 29113.866547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16984.443527, 29203.399445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22029.965622, 27186.822388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23561.061279, 23085.306580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25264.038000, 22905.300800, 470.028014, 470.028014, 0.000000, X, Y) && !ellipse(16810.894882, 22197.567001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20341.781174, 21969.906204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16948.988266, 18402.432281, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep  5 15:49:44 2012] Writing fullrun_pn_xmm0109080101_pi300-10000_pass1_cl_src2.gif
[Wed Sep  5 15:50:24 2012] Mean detx,y = (21.33, -259.52) 
[Wed Sep  5 15:50:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 15:53:48 2012] grppha failed
[Wed Sep  5 15:53:49 2012] Setting source spectrum file to fullrun_pn_xmm0109080101_pi300-10000_pass1_cl_src2_src.pi.gz
[Wed Sep  5 15:53:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109080101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Sep  5 16:07:41 2012] Updating aperture counts using extracted products
[Wed Sep  5 16:07:41 2012] Error reading totcts from fullrun_pn_xmm0109080101_pi300-10000_pass1_cl_src2_src.pi.gz
[Wed Sep  5 16:07:41 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 16:07:44 2012] Source 2 has no response, skipping
[Wed Sep  5 16:07:45 2012] xmm0109080101/analysis//spectral/fullrun_pn_xmm0109080101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete