[Wed Sep 5 13:07:50 2012] Detection parameters: Position = (287.6, 329.2) = 12 4 45.92 27 54 43.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 157.5 +/- 17.3 Background counts = 12.2 Rate = 0.009 +/- 0.001 [Wed Sep 5 13:07:50 2012] Off-axis axis estimate = 2.37' [Wed Sep 5 14:10:39 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting [Wed Sep 5 14:10:39 2012] Initial guess for spatial extent in simple fitting = 7.61" [Wed Sep 5 14:10:39 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.988 [Wed Sep 5 14:10:39 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.61" [Wed Sep 5 14:34:10 2012] fullrun_mos2_xmm0109080101_pi300-10000_cl_pass0_src2.ximg exists [Wed Sep 5 14:34:10 2012] fullrun_mos2_xmm0109080101_pi300-10000_cl_pass0_src2_1.ximg exists [Wed Sep 5 14:34:11 2012] Fit fullrun_mos2_xmm0109080101_pi300-10000_cl_pass0_src2 appears to have run properly [Wed Sep 5 14:34:11 2012] fullrun_mos2_xmm0109080101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Wed Sep 5 14:34:11 2012] fullrun_mos2_xmm0109080101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Wed Sep 5 14:34:11 2012] Fit fullrun_mos2_xmm0109080101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly [Wed Sep 5 14:34:22 2012] Source 3 is offset by -4.708152 and -0.474069 pixels which is larger than 2 X fitted extent = 0.837002 x 0.837002, not incorporating fit results [Wed Sep 5 14:34:22 2012] Spatial fit model total counts = 577.163000, observed total counts = 579.000000 [Wed Sep 5 14:34:22 2012] Offset between fit and detection position for source 3 = 4.704611 pixels [Wed Sep 5 14:34:22 2012] 584.743000 total counts/ 366.771000 bgd. counts: snr = 11.381597 Spatial fit parameters: Offset between fit and detection position for source 3 = 4.704611 pixels Position = (291.4, 326.5) = 12 4 44.66 27 54 29.7 Extent = 15.2 (14.5-30.4)" x 7.3 (5.6-9.0)", rotation angle = 225 (216-231) degrees Source counts = 218.0 +/- 24.2 Background counts = 366.8 Rate = 0.01 +/- 0.001 [Wed Sep 5 14:34:22 2012] Vigneting correction estimate = 1.000000 [Wed Sep 5 14:34:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 5 14:34:22 2012] Assessing source extent using major axis lower bound [Wed Sep 5 14:34:22 2012] Source does appear to be extended [Wed Sep 5 14:34:22 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.62 [Wed Sep 5 14:34:22 2012] Source is asymmetric [Wed Sep 5 14:34:22 2012] Source is confused with source 2 [Wed Sep 5 15:16:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Sep 5 15:16:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Sep 5 15:16:50 2012] Initial guess for spatial extent in simple fitting = 11.24" [Wed Sep 5 15:16:50 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.104 [Wed Sep 5 15:16:50 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.24" [Wed Sep 5 15:49:29 2012] fullrun_mos2_xmm0109080101_pi300-10000_cl_pass1_src2.ximg exists [Wed Sep 5 15:49:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080101_pi300-10000_cl_pass1_src2.csv [Wed Sep 5 15:49:29 2012] fullrun_mos2_xmm0109080101_pi300-10000_cl_pass1_src2_1.ximg exists [Wed Sep 5 15:49:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080101_pi300-10000_cl_pass1_src2.csv [Wed Sep 5 15:49:29 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109080101_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109080101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 15:49:30 2012] fullrun_mos2_xmm0109080101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Wed Sep 5 15:49:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080101_pi300-10000_cl_pass1_tfrozen_src2.csv [Wed Sep 5 15:49:30 2012] fullrun_mos2_xmm0109080101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Wed Sep 5 15:49:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109080101_pi300-10000_cl_pass1_tfrozen_src2.csv [Wed Sep 5 15:49:30 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109080101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109080101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 15:49:38 2012] Source 3 is offset by -8.442414 and 4.677379 pixels which is larger than 2 X fitted extent = 3.043232 x 3.043232, not incorporating fit results [Wed Sep 5 15:49:38 2012] Vigneting correction estimate = 1.000000 [Wed Sep 5 15:49:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 5 15:49:38 2012] Assessing source extent using major axis lower bound [Wed Sep 5 15:49:38 2012] Source does appear to be extended [Wed Sep 5 15:49:38 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.62 [Wed Sep 5 15:49:38 2012] Source is asymmetric [Wed Sep 5 16:05:01 2012] XMMSAS src. selection expression = ellipse(25304.702000, 28354.936000, 913.404026, 435.295813, 224.607000, X, Y) [Wed Sep 5 16:05:01 2012] Writing source region out to fullrun_mos2_xmm0109080101_pi300-10000_pass1_cl_src3_src.reg [Wed Sep 5 16:05:01 2012] Extracting stamp from image fullrun_mos2_xmm0109080101_pi300-10000_cl_sm2.00.img.gz, (239, 274) - (344, 379) [Wed Sep 5 16:05:01 2012] XMMSAS bgd. selection expression = annulus(25304.702000, 28354.936000, 1522.340044, 3044.680088, X, Y) && !ellipse(25954.779580, 27960.982000, 427.257612, 427.257612, 0.000000, X, Y) [Wed Sep 5 16:05:01 2012] Writing fullrun_mos2_xmm0109080101_pi300-10000_pass1_cl_src3.gif [Wed Sep 5 16:05:43 2012] Mean detx,y = (363.39, 702.72) [Wed Sep 5 16:05:44 2012] Setting backscal keywords in source and bgd. spectrum [Wed Sep 5 16:05:56 2012] grppha failed [Wed Sep 5 16:05:56 2012] Setting source spectrum file to fullrun_mos2_xmm0109080101_pi300-10000_pass1_cl_src3_src.pi.gz [Wed Sep 5 16:05:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109080101_pi300-10000_pass1_cl_src3_bgd.pi.gz [Wed Sep 5 16:07:41 2012] Updating aperture counts using extracted products [Wed Sep 5 16:07:41 2012] Error reading totcts from fullrun_mos2_xmm0109080101_pi300-10000_pass1_cl_src3_src.pi.gz [Wed Sep 5 16:07:41 2012] No arf file for this source, not re-computing flux [Wed Sep 5 16:07:43 2012] Flag b found in src. 3 procflags, skipping spectral fitting [Wed Sep 5 16:07:43 2012] Flag c found in src. 3 procflags, skipping spectral fitting [Wed Sep 5 16:07:43 2012] Source 3 has no response, skipping [Wed Sep 5 16:07:44 2012] xmm0109080101/analysis//spectral/fullrun_mos2_xmm0109080101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete