[Mon Aug 27 07:22:03 2012] Detection parameters:
  Position = (474.6, 419.0) = 22 47 30.42 -51 1 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.5 +/- 9.8
  Background counts = 3.5
  Rate = 0.004 +/- 0.0007

[Mon Aug 27 07:22:03 2012] Off-axis axis estimate = 15.48'
[Mon Aug 27 07:59:22 2012] Using EEF radius (= 14.17 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 07:59:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 27 07:59:22 2012] Initial guess for spatial extent in simple fitting = 14.17"
[Mon Aug 27 07:59:22 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.992
[Mon Aug 27 07:59:22 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 14.17"
[Mon Aug 27 08:20:50 2012] fullrun_mos1_xmm0109070601_pi300-10000_cl_pass0_src9.ximg exists
[Mon Aug 27 08:20:50 2012] fullrun_mos1_xmm0109070601_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Aug 27 08:20:50 2012] Fit fullrun_mos1_xmm0109070601_pi300-10000_cl_pass0_src9 appears to have run properly
[Mon Aug 27 08:20:50 2012] fullrun_mos1_xmm0109070601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Aug 27 08:20:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109070601_pi300-10000_cl_pass0_tfrozen_src9.csv
[Mon Aug 27 08:20:50 2012] fullrun_mos1_xmm0109070601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Aug 27 08:20:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109070601_pi300-10000_cl_pass0_tfrozen_src9.csv
[Mon Aug 27 08:20:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109070601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109070601_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 08:42:22 2012] Spatial fit model total counts = 86.784200, observed total counts = 94.000000
[Mon Aug 27 08:42:22 2012] Offset between fit and detection position for source 6 = 0.398041 pixels
[Mon Aug 27 08:42:22 2012] 88.457100 total counts/ 67.139000 bgd. counts: snr = 2.601723
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.398041 pixels
  Position = (474.4, 419.3) = 22 47 30.52 -51 1 42.9
  Extent = 5.6" x 5.6", rotation angle = 0
  Source counts = 21.3 +/- 9.4
  Background counts = 67.1
  Rate = 0.001 +/- 0.0006
[Mon Aug 27 08:42:22 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 08:42:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 08:42:22 2012] Assessing source extent using major
[Mon Aug 27 08:42:22 2012] Source does appear to be extended
[Mon Aug 27 08:42:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 08:42:22 2012] Deleting source due to low Poisson probability 0.8