[Wed Jul 25 08:07:20 2012] Detection parameters:
  Position = (321.7, 304.1) = 22 48 41.12 -51 9 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21874.0 +/- 175.0
  Background counts = 7.1
  Rate = 2 +/- 0.01

[Wed Jul 25 08:07:20 2012] Off-axis axis estimate = 1.74'
[Wed Jul 25 09:04:27 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 09:04:27 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Jul 25 09:04:27 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed Jul 25 09:04:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Wed Jul 25 09:22:48 2012] fullrun_mos2_xmm0109070401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 25 09:22:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109070401_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 09:22:48 2012] fullrun_mos2_xmm0109070401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 25 09:22:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109070401_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 09:22:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109070401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109070401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 09:22:48 2012] fullrun_mos2_xmm0109070401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 25 09:22:48 2012] fullrun_mos2_xmm0109070401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 25 09:22:48 2012] Fit fullrun_mos2_xmm0109070401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 25 09:22:54 2012] Spatial fit model total counts = 19572.800000, observed total counts = 19024.000000
[Wed Jul 25 09:22:54 2012] Offset between fit and detection position for source 2 = 0.172385 pixels
[Wed Jul 25 09:22:54 2012] 19598.840000 total counts/ 4722.240000 bgd. counts: snr = 216.485921
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.172385 pixels
  Position = (321.6, 304.2) = 22 48 41.19 -51 9 54.7
  Extent = 5.2 (5.1-5.2)", rotation angle = 0
  Source counts = 14876.6 +/- 140.0
  Background counts = 4722.2
  Rate = 1 +/- 0.009
[Wed Jul 25 09:22:54 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 09:22:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 09:22:54 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 09:22:54 2012] Source does appear to be extended
[Wed Jul 25 09:22:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 09:59:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 25 09:59:09 2012] Initial guess for spatial extent in simple fitting = 5.18"
[Wed Jul 25 09:59:09 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.786
[Wed Jul 25 09:59:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.18"
[Wed Jul 25 10:15:46 2012] fullrun_mos2_xmm0109070401_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 25 10:15:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109070401_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 10:15:46 2012] fullrun_mos2_xmm0109070401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 25 10:15:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109070401_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 10:15:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109070401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109070401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 10:15:46 2012] fullrun_mos2_xmm0109070401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 25 10:15:46 2012] fullrun_mos2_xmm0109070401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 25 10:15:46 2012] Fit fullrun_mos2_xmm0109070401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 25 10:15:57 2012] Spatial fit model total counts = 19553.100000, observed total counts = 19024.000000
[Wed Jul 25 10:15:57 2012] Offset between fit and detection position for source 2 = 0.000272 pixels
[Wed Jul 25 10:15:57 2012] 19575.510000 total counts/ 4701.010000 bgd. counts: snr = 216.943573
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000272 pixels
  Position = (321.6, 304.2) = 22 48 41.19 -51 9 54.7
  Extent = 5.2 (5.1-5.2)", rotation angle = 0
  Source counts = 14874.5 +/- 139.9
  Background counts = 4701.0
  Rate = 1 +/- 0.009
[Wed Jul 25 10:15:57 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 10:15:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 10:15:57 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 10:15:57 2012] Source does appear to be extended
[Wed Jul 25 10:15:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 11:41:10 2012] Counts = 14874.500000, rescaling region sizes by 3.000000
[Wed Jul 25 11:41:10 2012] XMMSAS src. selection expression = ellipse(27926.564400, 26418.919400, 934.297227, 934.297227, 0.000000, X, Y)
[Wed Jul 25 11:41:10 2012] Writing source region out to fullrun_mos2_xmm0109070401_pi300-10000_pass1_cl_src2_src.reg
[Wed Jul 25 11:41:10 2012] Extracting stamp from image fullrun_mos2_xmm0109070401_pi300-10000_cl_sm2.00.img.gz, (268, 251) - (375, 358)
[Wed Jul 25 11:41:10 2012] XMMSAS bgd. selection expression = annulus(27926.564400, 26418.919400, 4671.486134, 9342.972269, X, Y) && !ellipse(28447.730316, 25562.494049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37929.219604, 25938.106354, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 11:41:10 2012] Writing fullrun_mos2_xmm0109070401_pi300-10000_pass1_cl_src2.gif
[Wed Jul 25 11:41:15 2012] Mean detx,y = (22.18, 72.93) 
[Wed Jul 25 11:41:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 11:44:16 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 11:44:16 2012] Setting source spectrum file to fullrun_mos2_xmm0109070401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 25 11:44:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109070401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jul 25 11:52:49 2012] Updating aperture counts using extracted products
[Wed Jul 25 11:52:49 2012] Error reading totcts from fullrun_mos2_xmm0109070401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 25 11:52:50 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 11:52:50 2012] Using photon index=1.80, rate=1.01, arf fullrun_mos2_xmm0109070401_pi300-10000_pass1_cl_src2.arf
[Wed Jul 25 11:52:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 11:52:50 2012] Updating source flux to 1.1e-11
[Wed Jul 25 11:53:25 2012] Reading fit data from xmm0109070401/analysis//spectral/fullrun_mos2_xmm0109070401_pi300-10000_pass1_cl_src2_pl.csv
[Wed Jul 25 11:53:25 2012] Spectral fit parameter nH value = 165475000000.0
[Wed Jul 25 11:53:25 2012] Spectral fit parameter PhoIndex value = 2.29191
[Wed Jul 25 11:53:25 2012] Failed to get F(0.3-8.0) from xmm0109070401/analysis//spectral/fullrun_mos2_xmm0109070401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Jul 25 11:53:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 11:53:25 2012] Using Nh = 1.7e+11, photon index=2.29, rate=1.01, arf fullrun_mos2_xmm0109070401_pi300-10000_pass1_cl_src2.arf
[Wed Jul 25 11:53:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 11:53:25 2012] Updating source flux to 8.9e-12