[Tue Aug 14 11:07:52 2012] Detection parameters:
  Position = (280.4, 431.1) = 13 48 39.12 26 33 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.5 +/- 28.6
  Background counts = 469.4
  Rate = 0.003 +/- 0.0005

[Tue Aug 14 11:07:55 2012] Off-axis axis estimate = 9.71'
[Tue Aug 14 11:15:23 2012] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 11:15:23 2012] Initial guess for spatial extent in simple fitting = 11.28"
[Tue Aug 14 11:15:23 2012] source mask rpix=2.6, npix_max = 38, mask sum = 23, frac = 0.601
[Tue Aug 14 11:15:23 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.28"
[Wed Aug 15 03:06:36 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_src11.ximg exists
[Wed Aug 15 03:06:36 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Aug 15 03:06:36 2012] Fit fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_src11 appears to have run properly
[Wed Aug 15 03:06:37 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Aug 15 03:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Aug 15 03:06:37 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Aug 15 03:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Aug 15 03:06:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 03:59:55 2012] Source 14 is offset by -0.472224 and 9.355512 pixels which is larger than
2 X fitted extent = 1.275724 x 1.275724, not incorporating fit results
[Wed Aug 15 03:59:55 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 03:59:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 03:59:55 2012] Assessing source extent using major
[Wed Aug 15 03:59:55 2012] Source does appear to be extended
[Wed Aug 15 03:59:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 04:00:12 2012] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 04:00:12 2012] Initial guess for spatial extent in simple fitting = 11.28"
[Wed Aug 15 04:00:12 2012] source mask rpix=2.6, npix_max = 38, mask sum = 23, frac = 0.601
[Wed Aug 15 04:00:12 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 11.28"
[Wed Aug 15 06:15:27 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_src10.ximg exists
[Wed Aug 15 06:15:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_src10.csv
[Wed Aug 15 06:15:27 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Aug 15 06:15:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_src10.csv
[Wed Aug 15 06:15:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 06:15:27 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Aug 15 06:15:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Aug 15 06:15:27 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Aug 15 06:15:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Aug 15 06:15:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 07:13:09 2012] Source 14 is offset by 6.531377 and -0.031407 pixels which is larger than
2 X fitted extent = 1.352359 x 1.352359, not incorporating fit results
[Wed Aug 15 07:13:10 2012] Source 14 is offset by -2.500807 and -2.999223 pixels which is larger than
2 X fitted extent = 1.356382 x 1.356382, not incorporating fit results
[Wed Aug 15 07:13:10 2012] Spatial fit model total counts = 4953.620000, observed total counts = 4058.000000
[Wed Aug 15 07:13:10 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 07:13:10 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 07:13:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 07:13:10 2012] Assessing source extent using major
[Wed Aug 15 07:13:10 2012] Source does appear to be extended
[Wed Aug 15 07:13:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 07:13:26 2012] XMMSAS src. selection expression = ellipse(24341.971771, 37461.525574, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 07:13:26 2012] Writing source region out to fullrun_pn_xmm0109070201_pi300-10000_pass1_cl_src14_src.reg
[Wed Aug 15 07:13:26 2012] Extracting stamp from image fullrun_pn_xmm0109070201_pi300-10000_cl_sm2.00.img.gz, (243, 394) - (318, 469)
[Wed Aug 15 07:13:26 2012] XMMSAS bgd. selection expression = annulus(24341.971771, 37461.525574, 1087.500000, 2175.000000, X, Y) && !ellipse(25374.010864, 34515.653748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.143890, 34761.602386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21451.186493, 37789.766846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22861.476990, 38354.746460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21240.726000, 37561.248000, 1791.496052, 1791.496052, 0.000000, X, Y) && !ellipse(21979.481567, 38017.847137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23630.415955, 38604.048401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23314.897583, 36819.701447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22560.343567, 36059.662140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21494.393112, 34846.443848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23924.646301, 38798.473541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22139.974106, 35396.053497, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 07:13:26 2012] Writing fullrun_pn_xmm0109070201_pi300-10000_pass1_cl_src14.gif
[Wed Aug 15 07:33:54 2012] Mean detx,y = (-3562.64, 12856.24) 
[Wed Aug 15 07:33:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 07:34:15 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 07:34:16 2012] Setting source spectrum file to fullrun_pn_xmm0109070201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Aug 15 07:34:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109070201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Aug 15 09:04:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 15 09:04:18 2012] rmf not generated due to insufficient counts
[Wed Aug 15 10:26:26 2012] Updating aperture counts using extracted products
[Wed Aug 15 10:26:27 2012] Error reading totcts from fullrun_pn_xmm0109070201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Aug 15 10:26:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 10:26:30 2012] Using photon index=1.80, rate=0.00288, arf fullrun_pn_xmm0109070201_pi300-10000_pass1_cl_src14.arf
[Wed Aug 15 10:26:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 10:26:30 2012] Updating source flux to 1.9e-14
[Wed Aug 15 10:28:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting