[Tue Aug 14 11:07:52 2012] Detection parameters:
  Position = (292.2, 397.3) = 13 48 35.28 26 31 9.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8143.2 +/- 117.7
  Background counts = 276.4
  Rate = 0.1 +/- 0.002

[Tue Aug 14 11:07:55 2012] Off-axis axis estimate = 7.18'
[Tue Aug 14 11:15:23 2012] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 11:15:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 14 11:15:23 2012] Initial guess for spatial extent in simple fitting = 10.02"
[Tue Aug 14 11:15:23 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.764
[Tue Aug 14 11:15:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.02"
[Wed Aug 15 03:06:36 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 15 03:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_src1.csv
[Wed Aug 15 03:06:36 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 15 03:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_src1.csv
[Wed Aug 15 03:06:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 03:06:37 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 15 03:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Aug 15 03:06:37 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 15 03:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Aug 15 03:06:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109070201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 03:59:55 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Wed Aug 15 03:59:55 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 03:59:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 03:59:55 2012] Assessing source extent using major
[Wed Aug 15 03:59:55 2012] Source does appear to be extended
[Wed Aug 15 03:59:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 03:59:55 2012] Source is confused with source 3
[Wed Aug 15 04:00:12 2012] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 04:00:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 15 04:00:12 2012] Initial guess for spatial extent in simple fitting = 10.02"
[Wed Aug 15 04:00:12 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.764
[Wed Aug 15 04:00:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.02"
[Wed Aug 15 06:15:26 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 15 06:15:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 06:15:26 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 15 06:15:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 06:15:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 06:15:27 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 15 06:15:27 2012] fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 15 06:15:27 2012] Fit fullrun_pn_xmm0109070201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 15 07:13:09 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.393601 pixels away
[Wed Aug 15 07:13:10 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 07:13:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 07:13:10 2012] Assessing source extent using major
[Wed Aug 15 07:13:10 2012] Source does appear to be extended
[Wed Aug 15 07:13:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 07:13:25 2012] Counts = 8143.222656, rescaling region sizes by 2.000000
[Wed Aug 15 07:13:25 2012] XMMSAS src. selection expression = ellipse(25374.010864, 34515.653748, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Aug 15 07:13:25 2012] Writing source region out to fullrun_pn_xmm0109070201_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug 15 07:13:25 2012] Extracting stamp from image fullrun_pn_xmm0109070201_pi300-10000_cl_sm2.00.img.gz, (217, 322) - (367, 472)
[Wed Aug 15 07:13:26 2012] XMMSAS bgd. selection expression = annulus(25374.010864, 34515.653748, 4350.000000, 8700.000000, X, Y) && !ellipse(25596.143890, 34761.602386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21451.186493, 37789.766846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22861.476990, 38354.746460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21240.726000, 37561.248000, 1791.496052, 1791.496052, 0.000000, X, Y) && !ellipse(21979.481567, 38017.847137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23630.415955, 38604.048401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30942.109100, 38410.260468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24341.971771, 37461.525574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19152.288223, 36903.050781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23314.897583, 36819.701447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.000000, 36082.097137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22560.343567, 36059.662140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17799.792404, 36389.278717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19626.800369, 35893.560852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16850.387115, 35959.548950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21062.727829, 36239.484619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19175.304000, 35422.984000, 1449.888042, 1449.888042, 0.000000, X, Y) && !ellipse(20573.761703, 35374.821228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34847.582855, 35156.460999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21494.393112, 34846.443848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17444.475143, 33345.627472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17971.509079, 31456.839630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19843.513153, 28579.669342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28040.594849, 26844.297058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23924.646301, 38798.473541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28070.596680, 36217.331055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22139.974106, 35396.053497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21350.368393, 27407.436737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33016.706512, 26528.513184, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 07:13:26 2012] Writing fullrun_pn_xmm0109070201_pi300-10000_pass1_cl_src1.gif
[Wed Aug 15 07:13:54 2012] Mean detx,y = (-3633.00, 9843.77) 
[Wed Aug 15 07:14:00 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 07:15:28 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 07:15:28 2012] Setting source spectrum file to fullrun_pn_xmm0109070201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 15 07:15:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109070201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug 15 08:09:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 15 08:09:01 2012] rmf not generated due to insufficient counts
[Wed Aug 15 10:26:25 2012] Updating aperture counts using extracted products
[Wed Aug 15 10:26:25 2012] Error reading totcts from fullrun_pn_xmm0109070201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug 15 10:26:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 10:26:30 2012] Using photon index=1.80, rate=0.133, arf fullrun_pn_xmm0109070201_pi300-10000_pass1_cl_src1.arf
[Wed Aug 15 10:26:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 10:26:30 2012] Updating source flux to 6.2e-13
[Wed Aug 15 10:28:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Aug 15 10:30:00 2012] xmm0109070201/analysis//spectral/fullrun_pn_xmm0109070201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete