[Tue Aug 14 11:08:36 2012] Detection parameters:
  Position = (238.0, 459.9) = 13 48 52.87 26 35 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14858.2 +/- 158.4
  Background counts = 607.4
  Rate = 0.2 +/- 0.002

[Tue Aug 14 11:08:37 2012] Off-axis axis estimate = 12.50'
[Wed Aug 15 03:06:38 2012] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 03:06:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 15 03:06:38 2012] Initial guess for spatial extent in simple fitting = 12.68"
[Wed Aug 15 03:06:38 2012] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.772
[Wed Aug 15 03:06:38 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.68"
[Wed Aug 15 03:47:55 2012] fullrun_mos1_xmm0109070201_pi300-10000_cl_pass0_src2.ximg exists
[Wed Aug 15 03:47:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109070201_pi300-10000_cl_pass0_src2.csv
[Wed Aug 15 03:47:55 2012] fullrun_mos1_xmm0109070201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Aug 15 03:47:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109070201_pi300-10000_cl_pass0_src2.csv
[Wed Aug 15 03:47:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109070201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109070201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 03:47:55 2012] fullrun_mos1_xmm0109070201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Aug 15 03:47:55 2012] fullrun_mos1_xmm0109070201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Aug 15 03:47:55 2012] Fit fullrun_mos1_xmm0109070201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Aug 15 04:00:01 2012] Spatial fit model total counts = 41442.300000, observed total counts = 39095.000000
[Wed Aug 15 04:00:01 2012] Offset between fit and detection position for source 4 = 1.034631 pixels
[Wed Aug 15 04:00:01 2012] 41403.700000 total counts/ 18526.100000 bgd. counts: snr = 168.080937
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.034631 pixels
  Position = (237.5, 459.0) = 13 48 53.01 26 35 27.0
  Extent = 20.0 (19.0-21.3)", rotation angle = 0
  Source counts = 22877.6 +/- 203.5
  Background counts = 18526.1
  Rate = 0.4 +/- 0.004
[Wed Aug 15 04:00:01 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 04:00:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 04:00:01 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 04:00:01 2012] Source does appear to be extended
[Wed Aug 15 04:00:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 06:15:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 06:15:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 15 06:15:28 2012] Initial guess for spatial extent in simple fitting = 19.97"
[Wed Aug 15 06:15:28 2012] source mask rpix=4.6, npix_max = 103, mask sum = 110, frac = 1.061
[Wed Aug 15 06:15:28 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 19.97"
[Wed Aug 15 06:59:59 2012] fullrun_mos1_xmm0109070201_pi300-10000_cl_pass1_src2.ximg exists
[Wed Aug 15 06:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109070201_pi300-10000_cl_pass1_src2.csv
[Wed Aug 15 06:59:59 2012] fullrun_mos1_xmm0109070201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Aug 15 06:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109070201_pi300-10000_cl_pass1_src2.csv
[Wed Aug 15 06:59:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109070201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109070201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 06:59:59 2012] fullrun_mos1_xmm0109070201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Aug 15 06:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109070201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Aug 15 06:59:59 2012] fullrun_mos1_xmm0109070201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Aug 15 06:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109070201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Aug 15 06:59:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109070201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109070201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 07:13:14 2012] Spatial fit model total counts = 71483.500000, observed total counts = 61554.000000
[Wed Aug 15 07:13:14 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 07:13:14 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 07:13:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 07:13:14 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 07:13:14 2012] Source does appear to be extended
[Wed Aug 15 07:13:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 09:21:01 2012] Counts = 22877.600000, rescaling region sizes by 3.000000
[Wed Aug 15 09:21:01 2012] XMMSAS src. selection expression = ellipse(20616.230740, 39882.393800, 3594.384103, 3594.384103, 0.000000, X, Y)
[Wed Aug 15 09:21:01 2012] Writing source region out to fullrun_mos1_xmm0109070201_pi300-10000_pass1_cl_src4_src.reg
[Wed Aug 15 09:21:01 2012] Extracting stamp from image fullrun_mos1_xmm0109070201_pi300-10000_cl_sm2.00.img.gz, (31, 252) - (444, 595)
[Wed Aug 15 09:21:01 2012] XMMSAS bgd. selection expression = annulus(20616.230740, 39882.393800, 17971.920517, 35943.841034, X, Y) && !ellipse(25434.078066, 34762.516800, 625.312679, 408.459601, 185.718871, X, Y) && !ellipse(25637.084400, 23858.189200, 435.944813, 435.944813, 0.000000, X, Y) && !ellipse(21880.782120, 24122.218600, 403.023212, 348.407210, 328.217369, X, Y) && !ellipse(21921.738400, 21510.462920, 349.914410, 349.914410, 0.000000, X, Y) && !ellipse(22850.482513, 40747.129639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38974.737600, 17960.692200, 568.895216, 295.697609, 116.088653, X, Y) && !ellipse(29083.072380, 20693.882200, 390.118411, 390.118411, 0.000000, X, Y) && !ellipse(22794.519806, 39266.271118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12979.333160, 21257.668045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17952.609253, 31464.889679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21144.018200, 21058.492000, 398.600811, 398.600811, 0.000000, X, Y) && !ellipse(17425.032364, 33279.413696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32769.995880, 17436.024185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27999.584400, 26869.467600, 446.924013, 446.924013, 0.000000, X, Y) && !ellipse(19806.375931, 28616.428223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23492.505768, 40888.095764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11176.870400, 26466.183800, 550.502416, 550.502416, 0.000000, X, Y) && !ellipse(21335.597137, 27393.322601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35083.750366, 20390.722656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12804.443726, 17615.705948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28435.052551, 37595.110718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15143.193985, 12446.479401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29363.356995, 36151.446503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30877.931732, 38452.029388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8427.601379, 25874.027222, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 09:21:01 2012] Writing fullrun_mos1_xmm0109070201_pi300-10000_pass1_cl_src4.gif
[Wed Aug 15 09:22:33 2012] Mean detx,y = (-15682.30, -1279.87) 
[Wed Aug 15 09:22:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 09:32:30 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 09:32:30 2012] Setting source spectrum file to fullrun_mos1_xmm0109070201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug 15 09:32:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109070201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Aug 15 10:26:32 2012] Updating aperture counts using extracted products
[Wed Aug 15 10:26:33 2012] Error reading totcts from fullrun_mos1_xmm0109070201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Aug 15 10:26:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 10:26:35 2012] Using photon index=1.80, rate=0.411, arf fullrun_mos1_xmm0109070201_pi300-10000_pass1_cl_src4.arf
[Wed Aug 15 10:26:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 10:26:35 2012] Updating source flux to 9.7e-12
[Wed Aug 15 10:26:40 2012] Flag p found in src. 4 procflags, skipping spectral fitting