[Fri Jul 20 03:08:05 2012] Detection parameters:
  Position = (292.1, 321.3) = 10 34 38.82 39 38 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59945.3 +/- 285.0
  Background counts = 143.8
  Rate = 5 +/- 0.03

[Fri Jul 20 03:08:05 2012] Off-axis axis estimate = 1.72'
[Fri Jul 20 03:10:10 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 03:10:10 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Jul 20 03:10:10 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Fri Jul 20 03:10:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Jul 20 03:23:02 2012] fullrun_pn_xmm0109070101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 20 03:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109070101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 03:23:02 2012] fullrun_pn_xmm0109070101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 20 03:23:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109070101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 03:23:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109070101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109070101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 03:23:02 2012] fullrun_pn_xmm0109070101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 20 03:23:02 2012] fullrun_pn_xmm0109070101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 20 03:23:02 2012] Fit fullrun_pn_xmm0109070101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 20 04:02:05 2012] Spatial fit model total counts = 20702.500000, observed total counts = 22127.000000
[Fri Jul 20 04:02:05 2012] Offset between fit and detection position for source 1 = 0.349361 pixels
[Fri Jul 20 04:02:05 2012] 20317.709000 total counts/ 226.009000 bgd. counts: snr = 1336.453393
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.349361 pixels
  Position = (292.1, 321.6) = 10 34 38.83 39 38 27.7
  Extent = 6.7 (6.7-6.7)", rotation angle = 0
  Source counts = 20091.7 +/- 142.5
  Background counts = 226.0
  Rate = 4 +/- 0.03
[Fri Jul 20 04:02:05 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 04:02:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 04:02:05 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 04:02:05 2012] Source does appear to be extended
[Fri Jul 20 04:02:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 04:02:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 04:02:14 2012] Initial guess for spatial extent in simple fitting = 6.66"
[Fri Jul 20 04:02:14 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.970
[Fri Jul 20 04:02:14 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.66"
[Fri Jul 20 04:13:47 2012] fullrun_pn_xmm0109070101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 20 04:13:47 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109070101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 04:13:47 2012] fullrun_pn_xmm0109070101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 20 04:13:47 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109070101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 04:13:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109070101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109070101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 04:13:47 2012] fullrun_pn_xmm0109070101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 20 04:13:47 2012] fullrun_pn_xmm0109070101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 20 04:13:47 2012] Fit fullrun_pn_xmm0109070101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 20 04:34:10 2012] Spatial fit model total counts = 22652.100000, observed total counts = 22127.000000
[Fri Jul 20 04:34:10 2012] Offset between fit and detection position for source 1 = 0.154218 pixels
[Fri Jul 20 04:34:10 2012] 22753.780000 total counts/ 4667.180000 bgd. counts: snr = 264.746153
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.154218 pixels
  Position = (292.1, 321.5) = 10 34 38.85 39 38 27.1
  Extent = 5.9 (5.8-5.9)", rotation angle = 0
  Source counts = 18086.6 +/- 150.8
  Background counts = 4667.2
  Rate = 3 +/- 0.03
[Fri Jul 20 04:34:10 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 04:34:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 04:34:10 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 04:34:10 2012] Source does appear to be extended
[Fri Jul 20 04:34:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 04:34:17 2012] Counts = 18086.600000, rescaling region sizes by 3.000000
[Fri Jul 20 04:34:17 2012] XMMSAS src. selection expression = ellipse(25362.144440, 27918.675600, 1053.284430, 1053.284430, 0.000000, X, Y)
[Fri Jul 20 04:34:17 2012] Writing source region out to fullrun_pn_xmm0109070101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 20 04:34:17 2012] Extracting stamp from image fullrun_pn_xmm0109070101_pi300-10000_cl_sm2.00.img.gz, (232, 261) - (353, 382)
[Fri Jul 20 04:34:17 2012] XMMSAS bgd. selection expression = annulus(25362.144440, 27918.675600, 5266.422152, 10532.844303, X, Y) && !ellipse(16842.996841, 28784.786285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28995.992600, 25683.172200, 451.057613, 451.057613, 0.000000, X, Y) && !ellipse(27610.283630, 22192.290131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20671.376511, 20472.944931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21840.858505, 19111.106064, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 04:34:17 2012] Writing fullrun_pn_xmm0109070101_pi300-10000_pass1_cl_src1.gif
[Fri Jul 20 04:34:27 2012] Mean detx,y = (-468.78, -501.81) 
[Fri Jul 20 04:34:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 04:37:08 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 04:37:08 2012] Setting source spectrum file to fullrun_pn_xmm0109070101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 20 04:37:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109070101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 20 05:48:09 2012] Updating aperture counts using extracted products
[Fri Jul 20 05:48:09 2012] Error reading totcts from fullrun_pn_xmm0109070101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 20 05:48:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 05:48:09 2012] Using photon index=1.80, rate=3.49, arf fullrun_pn_xmm0109070101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 20 05:48:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 05:48:09 2012] Updating source flux to 8.2e-12
[Fri Jul 20 05:48:46 2012] Reading fit data from xmm0109070101/analysis//spectral/fullrun_pn_xmm0109070101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 20 05:48:46 2012] Spectral fit parameter nH value = 2.06267e+20
[Fri Jul 20 05:48:46 2012] Spectral fit parameter PhoIndex value = 3.89405
[Fri Jul 20 05:48:46 2012] Failed to get F(0.3-8.0) from xmm0109070101/analysis//spectral/fullrun_pn_xmm0109070101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 20 05:48:46 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 05:48:46 2012] Using Nh = 2.1e+20, photon index=3.89, rate=3.49, arf fullrun_pn_xmm0109070101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 20 05:48:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 05:48:46 2012] Updating source flux to 4.2e-12