[Fri Jul 20 03:08:42 2012] Detection parameters:
  Position = (292.3, 321.2) = 10 34 38.74 39 38 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 18826.7 +/- 162.7
  Background counts = 22.6
  Rate = 1 +/- 0.01

[Fri Jul 20 03:08:42 2012] Off-axis axis estimate = 1.71'
[Fri Jul 20 03:42:26 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 03:42:26 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jul 20 03:42:26 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Fri Jul 20 03:42:26 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Jul 20 04:02:03 2012] fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 20 04:02:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 04:02:03 2012] fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 20 04:02:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 04:02:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 04:02:03 2012] fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 20 04:02:03 2012] fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 20 04:02:03 2012] Fit fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 20 04:02:09 2012] Spatial fit model total counts = 15738.600000, observed total counts = 15730.000000
[Fri Jul 20 04:02:09 2012] Offset between fit and detection position for source 2 = 0.212104 pixels
[Fri Jul 20 04:02:09 2012] 15761.360000 total counts/ 3298.060000 bgd. counts: snr = 217.022006
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.212104 pixels
  Position = (292.2, 321.4) = 10 34 38.80 39 38 26.6
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 12463.3 +/- 125.5
  Background counts = 3298.1
  Rate = 0.9 +/- 0.009
[Fri Jul 20 04:02:09 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 04:02:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 04:02:09 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 04:02:09 2012] Source does appear to be extended
[Fri Jul 20 04:02:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 04:24:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 04:24:06 2012] Initial guess for spatial extent in simple fitting = 5.39"
[Fri Jul 20 04:24:06 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.991
[Fri Jul 20 04:24:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.39"
[Fri Jul 20 04:34:07 2012] fullrun_mos2_xmm0109070101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 20 04:34:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109070101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 04:34:07 2012] fullrun_mos2_xmm0109070101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 20 04:34:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109070101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 04:34:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109070101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109070101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 04:34:08 2012] fullrun_mos2_xmm0109070101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 20 04:34:08 2012] fullrun_mos2_xmm0109070101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 20 04:34:08 2012] Fit fullrun_mos2_xmm0109070101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 20 04:34:12 2012] Spatial fit model total counts = 15730.000000, observed total counts = 15730.000000
[Fri Jul 20 04:34:12 2012] Offset between fit and detection position for source 2 = 0.000076 pixels
[Fri Jul 20 04:34:12 2012] 15752.480000 total counts/ 3285.580000 bgd. counts: snr = 217.496590
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000076 pixels
  Position = (292.2, 321.4) = 10 34 38.80 39 38 26.6
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 12466.9 +/- 125.5
  Background counts = 3285.6
  Rate = 0.9 +/- 0.009
[Fri Jul 20 04:34:12 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 04:34:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 04:34:12 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 04:34:12 2012] Source does appear to be extended
[Fri Jul 20 04:34:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 05:34:33 2012] Counts = 12466.900000, rescaling region sizes by 3.000000
[Fri Jul 20 05:34:33 2012] XMMSAS src. selection expression = ellipse(25373.751280, 27910.217200, 973.184428, 973.184428, 0.000000, X, Y)
[Fri Jul 20 05:34:33 2012] Writing source region out to fullrun_mos2_xmm0109070101_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul 20 05:34:33 2012] Extracting stamp from image fullrun_mos2_xmm0109070101_pi300-10000_cl_sm2.00.img.gz, (236, 265) - (348, 377)
[Fri Jul 20 05:34:33 2012] XMMSAS bgd. selection expression = annulus(25373.751280, 27910.217200, 4865.922140, 9731.844280, X, Y) && !ellipse(22526.622040, 28074.411957, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 05:34:33 2012] Writing fullrun_mos2_xmm0109070101_pi300-10000_pass1_cl_src2.gif
[Fri Jul 20 05:34:37 2012] Mean detx,y = (618.18, 352.74) 
[Fri Jul 20 05:34:38 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 05:37:15 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 05:37:15 2012] Setting source spectrum file to fullrun_mos2_xmm0109070101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 20 05:37:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109070101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul 20 05:48:09 2012] Updating aperture counts using extracted products
[Fri Jul 20 05:48:09 2012] Error reading totcts from fullrun_mos2_xmm0109070101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 20 05:48:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 05:48:09 2012] Using photon index=1.80, rate=0.868, arf fullrun_mos2_xmm0109070101_pi300-10000_pass1_cl_src2.arf
[Fri Jul 20 05:48:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 05:48:09 2012] Updating source flux to 7.7e-12
[Fri Jul 20 05:48:34 2012] Reading fit data from xmm0109070101/analysis//spectral/fullrun_mos2_xmm0109070101_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jul 20 05:48:34 2012] Spectral fit parameter nH value = 2.18717e+19
[Fri Jul 20 05:48:34 2012] Spectral fit parameter PhoIndex value = 3.71779
[Fri Jul 20 05:48:34 2012] Failed to get F(0.3-8.0) from xmm0109070101/analysis//spectral/fullrun_mos2_xmm0109070101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jul 20 05:48:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 05:48:34 2012] Using Nh = 2.2e+19, photon index=3.72, rate=0.868, arf fullrun_mos2_xmm0109070101_pi300-10000_pass1_cl_src2.arf
[Fri Jul 20 05:48:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 05:48:34 2012] Updating source flux to 5.7e-12