[Fri Jul 20 03:08:42 2012] Detection parameters:
  Position = (245.3, 242.6) = 10 34 56.44 39 32 45.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.8 +/- 11.0
  Background counts = 19.2
  Rate = 0.006 +/- 0.001

[Fri Jul 20 03:08:42 2012] Off-axis axis estimate = 5.59'
[Fri Jul 20 03:42:26 2012] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 03:42:26 2012] Initial guess for spatial extent in simple fitting = 9.22"
[Fri Jul 20 03:42:26 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.910
[Fri Jul 20 03:42:26 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.22"
[Fri Jul 20 04:02:03 2012] fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jul 20 04:02:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_src5.csv
[Fri Jul 20 04:02:03 2012] fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jul 20 04:02:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_src5.csv
[Fri Jul 20 04:02:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 04:02:03 2012] fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jul 20 04:02:03 2012] fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jul 20 04:02:03 2012] Fit fullrun_mos2_xmm0109070101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Jul 20 04:02:09 2012] Spatial fit model total counts = 225.936000, observed total counts = 219.000000
[Fri Jul 20 04:02:09 2012] Offset between fit and detection position for source 10 = 0.222344 pixels
[Fri Jul 20 04:02:09 2012] Warning, changing simple spatial fit ID from 5 to 4
[Fri Jul 20 04:02:09 2012] 230.283000 total counts/ 210.901000 bgd. counts: snr = 1.334625
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.222344 pixels
  Position = (245.4, 242.8) = 10 34 56.41 39 32 44.8
  Extent = 2.9 (2.8-2.9)", rotation angle = 0
  Source counts = 19.4 +/- 15.2
  Background counts = 210.9
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability