[Fri Jul 20 03:08:22 2012] Detection parameters:
  Position = (292.3, 321.3) = 10 34 38.76 39 38 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 18185.9 +/- 159.7
  Background counts = 23.8
  Rate = 1 +/- 0.01

[Fri Jul 20 03:08:22 2012] Off-axis axis estimate = 1.71'
[Fri Jul 20 03:23:02 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 03:23:02 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Jul 20 03:23:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Fri Jul 20 03:23:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Jul 20 03:42:26 2012] fullrun_mos1_xmm0109070101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 20 03:42:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109070101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 03:42:26 2012] fullrun_mos1_xmm0109070101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 20 03:42:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109070101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 03:42:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109070101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109070101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 03:42:26 2012] fullrun_mos1_xmm0109070101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 20 03:42:26 2012] fullrun_mos1_xmm0109070101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 20 03:42:26 2012] Fit fullrun_mos1_xmm0109070101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 20 04:02:07 2012] Spatial fit model total counts = 14837.000000, observed total counts = 14837.000000
[Fri Jul 20 04:02:07 2012] Offset between fit and detection position for source 2 = 0.232320 pixels
[Fri Jul 20 04:02:07 2012] 14885.240000 total counts/ 3187.940000 bgd. counts: snr = 207.171762
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.232320 pixels
  Position = (292.2, 321.5) = 10 34 38.81 39 38 27.1
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 11697.3 +/- 122.0
  Background counts = 3187.9
  Rate = 0.8 +/- 0.009
[Fri Jul 20 04:02:07 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 04:02:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 04:02:07 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 04:02:07 2012] Source does appear to be extended
[Fri Jul 20 04:02:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 04:13:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 04:13:48 2012] Initial guess for spatial extent in simple fitting = 5.45"
[Fri Jul 20 04:13:48 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.976
[Fri Jul 20 04:13:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.45"
[Fri Jul 20 04:24:06 2012] fullrun_mos1_xmm0109070101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 20 04:24:06 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109070101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 04:24:06 2012] fullrun_mos1_xmm0109070101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 20 04:24:06 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109070101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 04:24:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109070101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109070101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 04:24:06 2012] fullrun_mos1_xmm0109070101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 20 04:24:06 2012] fullrun_mos1_xmm0109070101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 20 04:24:06 2012] Fit fullrun_mos1_xmm0109070101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 20 04:34:11 2012] Spatial fit model total counts = 14846.600000, observed total counts = 14837.000000
[Fri Jul 20 04:34:11 2012] Offset between fit and detection position for source 2 = 0.000962 pixels
[Fri Jul 20 04:34:11 2012] 14895.160000 total counts/ 3192.860000 bgd. counts: snr = 207.100568
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000962 pixels
  Position = (292.2, 321.5) = 10 34 38.81 39 38 27.1
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 11702.3 +/- 122.0
  Background counts = 3192.9
  Rate = 0.8 +/- 0.009
[Fri Jul 20 04:34:11 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 04:34:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 04:34:11 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 04:34:11 2012] Source does appear to be extended
[Fri Jul 20 04:34:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 05:10:28 2012] Counts = 11702.300000, rescaling region sizes by 3.000000
[Fri Jul 20 05:10:28 2012] XMMSAS src. selection expression = ellipse(25370.651160, 27918.977200, 980.508628, 980.508628, 0.000000, X, Y)
[Fri Jul 20 05:10:28 2012] Writing source region out to fullrun_mos1_xmm0109070101_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul 20 05:10:28 2012] Extracting stamp from image fullrun_mos1_xmm0109070101_pi300-10000_cl_sm2.00.img.gz, (236, 265) - (349, 378)
[Fri Jul 20 05:10:28 2012] XMMSAS bgd. selection expression = annulus(25370.651160, 27918.977200, 4902.543141, 9805.086282, X, Y) && !ellipse(28897.804000, 25839.811600, 869.560025, 869.560025, 0.000000, X, Y) && !ellipse(22520.157043, 28153.364563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33443.693634, 20451.116608, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 05:10:28 2012] Writing fullrun_mos1_xmm0109070101_pi300-10000_pass1_cl_src2.gif
[Fri Jul 20 05:10:32 2012] Mean detx,y = (582.44, -780.63) 
[Fri Jul 20 05:10:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 05:12:28 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 05:12:28 2012] Setting source spectrum file to fullrun_mos1_xmm0109070101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 20 05:12:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109070101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul 20 05:48:09 2012] Updating aperture counts using extracted products
[Fri Jul 20 05:48:09 2012] Error reading totcts from fullrun_mos1_xmm0109070101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 20 05:48:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 05:48:09 2012] Using photon index=1.80, rate=0.838, arf fullrun_mos1_xmm0109070101_pi300-10000_pass1_cl_src2.arf
[Fri Jul 20 05:48:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 05:48:09 2012] Updating source flux to 7.6e-12
[Fri Jul 20 05:48:25 2012] Reading fit data from xmm0109070101/analysis//spectral/fullrun_mos1_xmm0109070101_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jul 20 05:48:25 2012] Spectral fit parameter nH value = 1.85279e+20
[Fri Jul 20 05:48:25 2012] Spectral fit parameter PhoIndex value = 3.84436
[Fri Jul 20 05:48:25 2012] Failed to get F(0.3-8.0) from xmm0109070101/analysis//spectral/fullrun_mos1_xmm0109070101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jul 20 05:48:25 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 05:48:25 2012] Using Nh = 1.9e+20, photon index=3.84, rate=0.838, arf fullrun_mos1_xmm0109070101_pi300-10000_pass1_cl_src2.arf
[Fri Jul 20 05:48:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 05:48:25 2012] Updating source flux to 5.5e-12