[Sun Jul 15 09:03:59 2012] Detection parameters:
  Position = (302.8, 336.9) = 16 14 1.50 -22 58 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10360.2 +/- 120.4
  Background counts = 133.0
  Rate = 0.2 +/- 0.003

[Sun Jul 15 09:04:01 2012] Off-axis axis estimate = 2.81'
[Sun Jul 15 09:07:39 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 09:07:39 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Sun Jul 15 09:07:39 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.756
[Sun Jul 15 09:07:39 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.83"
[Sun Jul 15 11:04:04 2012] fullrun_pn_xmm0109060201_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jul 15 11:04:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060201_pi300-10000_cl_pass0_src5.csv
[Sun Jul 15 11:04:04 2012] fullrun_pn_xmm0109060201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jul 15 11:04:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060201_pi300-10000_cl_pass0_src5.csv
[Sun Jul 15 11:04:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109060201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109060201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 11:04:04 2012] fullrun_pn_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jul 15 11:04:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jul 15 11:04:04 2012] fullrun_pn_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jul 15 11:04:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jul 15 11:04:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 12:58:21 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.351103 pixels away
[Sun Jul 15 12:58:21 2012] Spatial fit model total counts = 1657.810000, observed total counts = 1344.000000
[Sun Jul 15 12:58:21 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 15 12:58:21 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 12:58:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 12:58:21 2012] Assessing source extent using major
[Sun Jul 15 12:58:21 2012] Source does appear to be extended
[Sun Jul 15 12:58:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 12:58:45 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 12:58:45 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Sun Jul 15 12:58:45 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.756
[Sun Jul 15 12:58:45 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.83"
[Sun Jul 15 15:01:08 2012] fullrun_pn_xmm0109060201_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jul 15 15:01:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060201_pi300-10000_cl_pass1_src5.csv
[Sun Jul 15 15:01:08 2012] fullrun_pn_xmm0109060201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jul 15 15:01:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060201_pi300-10000_cl_pass1_src5.csv
[Sun Jul 15 15:01:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109060201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109060201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 15:01:08 2012] fullrun_pn_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jul 15 15:01:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jul 15 15:01:08 2012] fullrun_pn_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jul 15 15:01:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jul 15 15:01:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 16:44:51 2012] Spatial fit model total counts = 10106.300000, observed total counts = 8912.000000
[Sun Jul 15 16:44:51 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 15 16:44:51 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:44:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:44:51 2012] Assessing source extent using major
[Sun Jul 15 16:44:51 2012] Source does appear to be extended
[Sun Jul 15 16:44:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 16:45:13 2012] Counts = 10360.170898, rescaling region sizes by 3.000000
[Sun Jul 15 16:45:13 2012] XMMSAS src. selection expression = ellipse(26296.774261, 29264.937714, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sun Jul 15 16:45:13 2012] Writing source region out to fullrun_pn_xmm0109060201_pi300-10000_pass1_cl_src5_src.reg
[Sun Jul 15 16:45:13 2012] Extracting stamp from image fullrun_pn_xmm0109060201_pi300-10000_cl_sm2.00.img.gz, (190, 224) - (415, 449)
[Sun Jul 15 16:45:13 2012] XMMSAS bgd. selection expression = annulus(26296.774261, 29264.937714, 9787.500000, 19575.000000, X, Y) && !ellipse(23663.167200, 21066.248200, 1338.758439, 1338.758439, 0.000000, X, Y) && !ellipse(26138.329622, 26548.386811, 1391.387538, 1348.120618, 32.474498, X, Y) && !ellipse(12207.298000, 18069.438000, 2095.312060, 595.219217, 71.517600, X, Y) && !ellipse(18990.468170, 16146.351669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33285.933800, 40501.915400, 559.415216, 385.991211, 0.000000, X, Y) && !ellipse(22915.705963, 33868.280609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12860.166000, 29291.685400, 796.386423, 796.386423, 0.000000, X, Y) && !ellipse(22762.911682, 28248.804901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35326.791748, 14802.983841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11349.078144, 16771.149200, 520.650415, 520.650415, 0.000000, X, Y) && !ellipse(23849.634000, 40947.146800, 518.294415, 518.294415, 0.000000, X, Y) && !ellipse(34394.881775, 42055.212128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29804.388301, 43153.002335, 989.698319, 410.300232, 355.827130, X, Y) && !ellipse(37684.428558, 38929.778015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21962.923477, 38384.727051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15421.705231, 34548.363708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15579.623718, 32467.181824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12155.140381, 29435.717163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23584.505188, 25438.631622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12517.190796, 17167.959152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31579.456848, 43647.953583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22836.684326, 38303.889374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27019.773254, 36476.291992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35115.090332, 32400.588379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26023.635468, 30855.504700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19126.643295, 30425.262512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16845.127920, 29425.088820, 351.522410, 351.522410, 0.000000, X, Y) && !ellipse(28945.657166, 13425.630310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26978.214081, 28338.821014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32280.928864, 27713.797913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33569.254400, 27573.699800, 553.432816, 553.432816, 0.000000, X, Y) && !ellipse(29079.272400, 27532.488200, 370.528811, 370.528811, 0.000000, X, Y) && !ellipse(22367.346832, 26825.255188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24886.773163, 26585.277710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31585.255432, 26062.348450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33818.711212, 26010.453247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22854.207520, 26033.315704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21330.374695, 26025.385132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24395.677704, 25336.707703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21856.172000, 25126.334000, 1267.152036, 1267.152036, 0.000000, X, Y) && !ellipse(22693.402000, 25383.363600, 1267.152036, 1267.152036, 0.000000, X, Y) && !ellipse(39258.725525, 25289.132233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23666.524353, 24515.788574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22946.660950, 24822.840057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24529.084961, 24315.957794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9314.420990, 24101.314606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23074.020050, 24221.813110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21178.024794, 22220.471400, 374.292811, 374.292811, 0.000000, X, Y) && !ellipse(34529.807200, 21535.949000, 473.371214, 473.371214, 0.000000, X, Y) && !ellipse(24268.000000, 21331.144653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32735.557495, 19454.439850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24026.110901, 19781.392105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19630.099243, 17962.566940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24404.208313, 17712.172455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24765.026794, 15961.487289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35533.209656, 15488.564178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17743.000000, 11553.916962, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 15 16:45:13 2012] Writing fullrun_pn_xmm0109060201_pi300-10000_pass1_cl_src5.gif
[Sun Jul 15 17:00:26 2012] Mean detx,y = (-24.52, -1656.87) 
[Sun Jul 15 17:00:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 17:13:44 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 17:13:44 2012] Setting source spectrum file to fullrun_pn_xmm0109060201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jul 15 17:13:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109060201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jul 15 18:04:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 15 18:04:21 2012] rmf not generated due to insufficient counts
[Sun Jul 15 22:30:11 2012] Updating aperture counts using extracted products
[Sun Jul 15 22:30:11 2012] Error reading totcts from fullrun_pn_xmm0109060201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jul 15 22:30:12 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:30:12 2012] Using photon index=1.80, rate=0.243, arf fullrun_pn_xmm0109060201_pi300-10000_pass1_cl_src5.arf
[Sun Jul 15 22:30:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:30:12 2012] Updating source flux to 5.9e-13
[Sun Jul 15 22:32:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting