[Sun Jul 15 09:04:54 2012] Detection parameters:
  Position = (301.2, 305.8) = 16 14 1.99 -23 1 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8533.4 +/- 110.9
  Background counts = 35.5
  Rate = 0.2 +/- 0.002

[Sun Jul 15 09:04:54 2012] Off-axis axis estimate = 0.57'
[Sun Jul 15 11:58:58 2012] Using EEF radius (= 6.71 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 11:58:58 2012] Initial guess for spatial extent in simple fitting = 6.71"
[Sun Jul 15 11:58:58 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.958
[Sun Jul 15 11:58:58 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 6.71"
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jul 15 12:58:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src2.csv
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jul 15 12:58:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src2.csv
[Sun Jul 15 12:58:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jul 15 12:58:11 2012] Fit fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Jul 15 12:58:34 2012] Source 4 is offset by 6.419475 and -6.523642 pixels which is larger than
2 X fitted extent = 1.090879 x 1.090879, not incorporating fit results
[Sun Jul 15 12:58:34 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 12:58:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 12:58:34 2012] Assessing source extent using major
[Sun Jul 15 12:58:34 2012] Source does appear to be extended
[Sun Jul 15 12:58:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 15:47:30 2012] Using EEF radius (= 6.71 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 15:47:30 2012] Initial guess for spatial extent in simple fitting = 6.71"
[Sun Jul 15 15:47:30 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.958
[Sun Jul 15 15:47:30 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.71"
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jul 15 16:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src2.csv
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jul 15 16:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src2.csv
[Sun Jul 15 16:44:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jul 15 16:44:38 2012] Fit fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Jul 15 16:45:01 2012] Spatial fit model total counts = 7756.070000, observed total counts = 7694.000000
[Sun Jul 15 16:45:01 2012] Offset between fit and detection position for source 4 = 0.182595 pixels
[Sun Jul 15 16:45:01 2012] 7746.270000 total counts/ 1986.590000 bgd. counts: snr = 129.224313
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.182595 pixels
  Position = (301.1, 305.7) = 16 14 2.04 -23 1 3.6
  Extent = 5.2 (5.1-5.3)", rotation angle = 0
  Source counts = 5759.7 +/- 88.0
  Background counts = 1986.6
  Rate = 0.1 +/- 0.002
[Sun Jul 15 16:45:01 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:45:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:45:01 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 16:45:01 2012] Source does appear to be extended
[Sun Jul 15 16:45:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 21:20:46 2012] Counts = 5759.680000, rescaling region sizes by 2.000000
[Sun Jul 15 21:20:46 2012] XMMSAS src. selection expression = ellipse(26148.650940, 26544.058600, 623.961618, 623.961618, 0.000000, X, Y)
[Sun Jul 15 21:20:46 2012] Writing source region out to fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src4_src.reg
[Sun Jul 15 21:20:46 2012] Extracting stamp from image fullrun_mos2_xmm0109060201_pi300-10000_cl_sm2.00.img.gz, (265, 270) - (337, 342)
[Sun Jul 15 21:20:47 2012] XMMSAS bgd. selection expression = annulus(26148.650940, 26544.058600, 2079.872060, 4159.744120, X, Y) && !ellipse(23668.847504, 21075.158676, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26309.295380, 29285.447815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22752.864680, 28189.386600, 398.454411, 398.454411, 0.000000, X, Y) && !ellipse(29068.249400, 27515.804400, 547.079216, 547.079216, 0.000000, X, Y) && !ellipse(24811.167600, 25214.448800, 1124.664032, 1124.664032, 0.000000, X, Y) && !ellipse(23885.068000, 27249.052000, 1224.416035, 1224.416035, 0.000000, X, Y) && !ellipse(24103.738647, 24834.200928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23245.180200, 25989.776000, 1201.896035, 1201.896035, 0.000000, X, Y) && !ellipse(23282.370000, 25253.662400, 1249.696036, 1249.696036, 0.000000, X, Y)
[Sun Jul 15 21:20:47 2012] Writing fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src4.gif
[Sun Jul 15 21:27:55 2012] Mean detx,y = (838.81, -1064.08) 
[Sun Jul 15 21:27:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 21:28:09 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 21:28:09 2012] Setting source spectrum file to fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jul 15 21:28:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jul 15 22:30:14 2012] Updating aperture counts using extracted products
[Sun Jul 15 22:30:14 2012] Error reading totcts from fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jul 15 22:30:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:30:14 2012] Using photon index=1.80, rate=0.108, arf fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src4.arf
[Sun Jul 15 22:30:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:30:14 2012] Updating source flux to 1.1e-12
[Sun Jul 15 22:31:14 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Sun Jul 15 22:32:23 2012] Reading fit data from xmm0109060201/analysis//spectral/fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src4_pl.csv
[Sun Jul 15 22:32:23 2012] Spectral fit parameter nH value = 4.42935e+21
[Sun Jul 15 22:32:23 2012] Spectral fit parameter PhoIndex value = 4.26198
[Sun Jul 15 22:32:23 2012] Failed to get F(0.3-8.0) from xmm0109060201/analysis//spectral/fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Sun Jul 15 22:32:23 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:32:23 2012] Using Nh = 4.4e+21, photon index=4.26, rate=0.108, arf fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src4.arf
[Sun Jul 15 22:32:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:32:23 2012] Updating source flux to 7.5e-13