[Sun Jul 15 09:04:54 2012] Detection parameters:
  Position = (261.1, 290.8) = 16 14 14.65 -23 2 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.0 +/- 13.0
  Background counts = 37.2
  Rate = 0.001 +/- 0.0003

[Sun Jul 15 09:04:54 2012] Off-axis axis estimate = 2.76'
[Sun Jul 15 11:58:58 2012] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 11:58:58 2012] Initial guess for spatial extent in simple fitting = 7.81"
[Sun Jul 15 11:58:58 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.949
[Sun Jul 15 11:58:58 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 7.81"
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src37.ximg exists
[Sun Jul 15 12:58:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src37.csv
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src37_1.ximg exists
[Sun Jul 15 12:58:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src37.csv
[Sun Jul 15 12:58:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 12:58:12 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sun Jul 15 12:58:12 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sun Jul 15 12:58:12 2012] Fit fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Sun Jul 15 12:58:34 2012] Spatial fit model total counts = 662.096000, observed total counts = 663.000000
[Sun Jul 15 12:58:34 2012] Offset between fit and detection position for source 36 = 7.079519 pixels
[Sun Jul 15 12:58:34 2012] 664.493000 total counts/ 510.602000 bgd. counts: snr = 6.810390
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 7.079519 pixels
  Position = (268.2, 290.8) = 16 14 12.42 -23 2 8.1
  Extent = 15.6 (15.6-31.2)", rotation angle = 0
  Source counts = 153.9 +/- 25.8
  Background counts = 510.6
  Rate = 0.003 +/- 0.0005
[Sun Jul 15 12:58:34 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 12:58:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 12:58:34 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 12:58:34 2012] Source does appear to be extended
[Sun Jul 15 12:58:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 12:58:34 2012] Source is confused with source 32
[Sun Jul 15 15:47:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 15:47:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 15 15:47:30 2012] Initial guess for spatial extent in simple fitting = 15.62"
[Sun Jul 15 15:47:30 2012] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.956
[Sun Jul 15 15:47:30 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 15.62"
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src33.ximg exists
[Sun Jul 15 16:44:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src33.csv
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src33_1.ximg exists
[Sun Jul 15 16:44:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src33.csv
[Sun Jul 15 16:44:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 16:44:39 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sun Jul 15 16:44:39 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sun Jul 15 16:44:39 2012] Fit fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Sun Jul 15 16:45:01 2012] Warning, spatial fit 33 centroid is now closest to src. 38
[Sun Jul 15 16:45:01 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:45:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:45:01 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 16:45:01 2012] Source does appear to be extended
[Sun Jul 15 16:45:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 21:20:47 2012] XMMSAS src. selection expression = ellipse(23282.370000, 25253.662400, 937.272027, 937.272027, 0.000000, X, Y)
[Sun Jul 15 21:20:47 2012] Writing source region out to fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src36_src.reg
[Sun Jul 15 21:20:47 2012] Extracting stamp from image fullrun_mos2_xmm0109060201_pi300-10000_cl_sm2.00.img.gz, (214, 237) - (322, 345)
[Sun Jul 15 21:20:47 2012] XMMSAS bgd. selection expression = annulus(23282.370000, 25253.662400, 1562.120045, 3124.240090, X, Y) && !ellipse(23668.847504, 21075.158676, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26148.650940, 26544.058600, 415.974412, 415.974412, 0.000000, X, Y) && !ellipse(22752.864680, 28189.386600, 398.454411, 398.454411, 0.000000, X, Y) && !ellipse(21375.605800, 26021.342000, 481.432014, 274.724808, 77.359494, X, Y) && !ellipse(24811.167600, 25214.448800, 1124.664032, 1124.664032, 0.000000, X, Y) && !ellipse(23885.068000, 27249.052000, 1224.416035, 1224.416035, 0.000000, X, Y) && !ellipse(24103.738647, 24834.200928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23245.180200, 25989.776000, 1201.896035, 1201.896035, 0.000000, X, Y)
[Sun Jul 15 21:20:47 2012] Writing fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src36.gif
[Sun Jul 15 21:43:15 2012] Mean detx,y = (3790.84, -1743.22) 
[Sun Jul 15 21:43:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 21:43:33 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 21:43:33 2012] Setting source spectrum file to fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sun Jul 15 21:43:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sun Jul 15 22:30:14 2012] Updating aperture counts using extracted products
[Sun Jul 15 22:30:14 2012] Error reading totcts from fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sun Jul 15 22:30:15 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:30:15 2012] Using photon index=1.80, rate=0.00289, arf fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src36.arf
[Sun Jul 15 22:30:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:30:15 2012] Updating source flux to 3e-14
[Sun Jul 15 22:31:14 2012] Flag c found in src. 36 procflags, skipping spectral fitting