[Sun Jul 15 09:04:54 2012] Detection parameters:
  Position = (266.9, 300.9) = 16 14 12.83 -23 1 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.8 +/- 13.7
  Background counts = 37.0
  Rate = 0.001 +/- 0.0003

[Sun Jul 15 09:04:54 2012] Off-axis axis estimate = 2.30'
[Sun Jul 15 11:58:58 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 11:58:58 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Sun Jul 15 11:58:58 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.796
[Sun Jul 15 11:58:58 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 7.58"
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src34.ximg exists
[Sun Jul 15 12:58:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src34.csv
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src34_1.ximg exists
[Sun Jul 15 12:58:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src34.csv
[Sun Jul 15 12:58:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 12:58:12 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sun Jul 15 12:58:12 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sun Jul 15 12:58:12 2012] Fit fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Sun Jul 15 12:58:34 2012] Source 32 is offset by -5.101992 and 5.849563 pixels which is larger than
2 X fitted extent = 3.911766 x 3.911766, not incorporating fit results
[Sun Jul 15 12:58:34 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 12:58:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 12:58:34 2012] Assessing source extent using major
[Sun Jul 15 12:58:34 2012] Source does appear to be extended
[Sun Jul 15 12:58:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 12:58:34 2012] Source is confused with source 36
[Sun Jul 15 15:47:30 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 15:47:30 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Sun Jul 15 15:47:30 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.796
[Sun Jul 15 15:47:30 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 7.58"
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src30.ximg exists
[Sun Jul 15 16:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src30.csv
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src30_1.ximg exists
[Sun Jul 15 16:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src30.csv
[Sun Jul 15 16:44:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 16:44:39 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sun Jul 15 16:44:39 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sun Jul 15 16:44:39 2012] Fit fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sun Jul 15 16:45:01 2012] Spatial fit model total counts = 758.986000, observed total counts = 759.000000
[Sun Jul 15 16:45:01 2012] Offset between fit and detection position for source 32 = 1.815924 pixels
[Sun Jul 15 16:45:01 2012] 637.804000 total counts/ 524.031000 bgd. counts: snr = 4.970050
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 1.815924 pixels
  Position = (267.7, 299.3) = 16 14 12.55 -23 1 31.3
  Extent = 15.0 (14.8-15.2)", rotation angle = 0
  Source counts = 113.8 +/- 25.3
  Background counts = 524.0
  Rate = 0.002 +/- 0.0005
[Sun Jul 15 16:45:01 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:45:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:45:01 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 16:45:01 2012] Source does appear to be extended
[Sun Jul 15 16:45:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 21:20:47 2012] XMMSAS src. selection expression = ellipse(23245.180200, 25989.776000, 901.422026, 901.422026, 0.000000, X, Y)
[Sun Jul 15 21:20:47 2012] Writing source region out to fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src32_src.reg
[Sun Jul 15 21:20:47 2012] Extracting stamp from image fullrun_mos2_xmm0109060201_pi300-10000_cl_sm2.00.img.gz, (216, 247) - (320, 351)
[Sun Jul 15 21:20:47 2012] XMMSAS bgd. selection expression = annulus(23245.180200, 25989.776000, 1502.370043, 3004.740086, X, Y) && !ellipse(23668.847504, 21075.158676, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26148.650940, 26544.058600, 415.974412, 415.974412, 0.000000, X, Y) && !ellipse(26309.295380, 29285.447815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22752.864680, 28189.386600, 398.454411, 398.454411, 0.000000, X, Y) && !ellipse(21375.605800, 26021.342000, 481.432014, 274.724808, 77.359494, X, Y) && !ellipse(24811.167600, 25214.448800, 1124.664032, 1124.664032, 0.000000, X, Y) && !ellipse(23885.068000, 27249.052000, 1224.416035, 1224.416035, 0.000000, X, Y) && !ellipse(24103.738647, 24834.200928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23282.370000, 25253.662400, 1249.696036, 1249.696036, 0.000000, X, Y)
[Sun Jul 15 21:20:47 2012] Writing fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src32.gif
[Sun Jul 15 21:42:19 2012] Mean detx,y = (3719.54, -1198.23) 
[Sun Jul 15 21:42:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 21:42:40 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 21:42:40 2012] Setting source spectrum file to fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sun Jul 15 21:42:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sun Jul 15 22:30:14 2012] Updating aperture counts using extracted products
[Sun Jul 15 22:30:14 2012] Error reading totcts from fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sun Jul 15 22:30:15 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:30:15 2012] Using photon index=1.80, rate=0.00213, arf fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src32.arf
[Sun Jul 15 22:30:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:30:15 2012] Updating source flux to 2.2e-14
[Sun Jul 15 22:31:14 2012] Flag b found in src. 32 procflags, skipping spectral fitting
[Sun Jul 15 22:31:14 2012] Flag c found in src. 32 procflags, skipping spectral fitting