[Sun Jul 15 09:04:54 2012] Detection parameters:
  Position = (335.0, 317.0) = 16 13 51.36 -23 0 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.6 +/- 15.1
  Background counts = 28.3
  Rate = 0.002 +/- 0.0003

[Sun Jul 15 09:04:54 2012] Off-axis axis estimate = 2.97'
[Sun Jul 15 11:58:58 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 11:58:58 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Sun Jul 15 11:58:58 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.744
[Sun Jul 15 11:58:58 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.91"
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src17.ximg exists
[Sun Jul 15 12:58:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src17.csv
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Jul 15 12:58:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src17.csv
[Sun Jul 15 12:58:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Jul 15 12:58:11 2012] Fit fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun Jul 15 12:58:34 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 11.053937 pixels away
[Sun Jul 15 12:58:34 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 12:58:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 12:58:34 2012] Assessing source extent using major
[Sun Jul 15 12:58:34 2012] Source does appear to be extended
[Sun Jul 15 12:58:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 15:47:30 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 15:47:30 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Sun Jul 15 15:47:30 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.744
[Sun Jul 15 15:47:30 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.91"
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src15.ximg exists
[Sun Jul 15 16:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src15.csv
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Jul 15 16:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src15.csv
[Sun Jul 15 16:44:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Jul 15 16:44:38 2012] Fit fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Jul 15 16:45:01 2012] Spatial fit model total counts = 374.357000, observed total counts = 387.000000
[Sun Jul 15 16:45:01 2012] Offset between fit and detection position for source 31 = 0.351298 pixels
[Sun Jul 15 16:45:01 2012] 382.762700 total counts/ 290.542000 bgd. counts: snr = 5.410332
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.351298 pixels
  Position = (334.7, 316.8) = 16 13 51.46 -23 0 15.0
  Extent = 6.8 (4.8-8.5)", rotation angle = 0
  Source counts = 92.2 +/- 19.6
  Background counts = 290.5
  Rate = 0.002 +/- 0.0004
[Sun Jul 15 16:45:01 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:45:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:45:01 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 16:45:01 2012] Source does appear to be extended
[Sun Jul 15 16:45:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 21:20:47 2012] XMMSAS src. selection expression = ellipse(29068.249400, 27515.804400, 410.309412, 410.309412, 0.000000, X, Y)
[Sun Jul 15 21:20:47 2012] Writing source region out to fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src31_src.reg
[Sun Jul 15 21:20:47 2012] Extracting stamp from image fullrun_mos2_xmm0109060201_pi300-10000_cl_sm2.00.img.gz, (311, 293) - (358, 340)
[Sun Jul 15 21:20:47 2012] XMMSAS bgd. selection expression = annulus(29068.249400, 27515.804400, 683.849020, 1367.698039, X, Y)
[Sun Jul 15 21:20:47 2012] Writing fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src31.gif
[Sun Jul 15 21:38:09 2012] Mean detx,y = (-2209.32, -691.96) 
[Sun Jul 15 21:38:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 21:38:18 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 21:38:18 2012] Setting source spectrum file to fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun Jul 15 21:38:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sun Jul 15 22:01:46 2012] Not generating rmf since there are only 92 counts
[Sun Jul 15 22:01:46 2012] rmf not generated due to insufficient counts
[Sun Jul 15 22:30:14 2012] Updating aperture counts using extracted products
[Sun Jul 15 22:30:14 2012] Error reading totcts from fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun Jul 15 22:30:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:30:14 2012] Using photon index=1.80, rate=0.00173, arf fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src31.arf
[Sun Jul 15 22:30:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:30:14 2012] Updating source flux to 1.9e-14
[Sun Jul 15 22:31:14 2012] Source 31 has fewer than 100.000000 counts, skipping spectral fitting