[Sun Jul 15 09:04:54 2012] Detection parameters:
  Position = (272.6, 242.8) = 16 14 11.02 -23 5 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12726.5 +/- 135.2
  Background counts = 30.3
  Rate = 0.3 +/- 0.003

[Sun Jul 15 09:04:54 2012] Off-axis axis estimate = 4.45'
[Sun Jul 15 11:58:58 2012] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 11:58:58 2012] Initial guess for spatial extent in simple fitting = 8.65"
[Sun Jul 15 11:58:58 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.009
[Sun Jul 15 11:58:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.65"
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 15 12:58:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 15 12:58:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 12:58:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 15 12:58:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 15 12:58:11 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 15 12:58:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jul 15 12:58:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 12:58:34 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.776810 pixels away
[Sun Jul 15 12:58:34 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 12:58:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 12:58:34 2012] Assessing source extent using major
[Sun Jul 15 12:58:34 2012] Source does appear to be extended
[Sun Jul 15 12:58:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 15:47:30 2012] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 15:47:30 2012] Initial guess for spatial extent in simple fitting = 8.65"
[Sun Jul 15 15:47:30 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.009
[Sun Jul 15 15:47:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.65"
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 15 16:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 15 16:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 16:44:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 15 16:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jul 15 16:44:38 2012] fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 15 16:44:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jul 15 16:44:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 16:45:01 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.558287 pixels away
[Sun Jul 15 16:45:01 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:45:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:45:01 2012] Assessing source extent using major
[Sun Jul 15 16:45:01 2012] Source does appear to be extended
[Sun Jul 15 16:45:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 21:20:46 2012] Counts = 12726.515625, rescaling region sizes by 3.000000
[Sun Jul 15 21:20:46 2012] XMMSAS src. selection expression = ellipse(23668.847504, 21075.158676, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sun Jul 15 21:20:46 2012] Writing source region out to fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 15 21:20:46 2012] Extracting stamp from image fullrun_mos2_xmm0109060201_pi300-10000_cl_sm2.00.img.gz, (160, 130) - (385, 355)
[Sun Jul 15 21:20:46 2012] XMMSAS bgd. selection expression = annulus(23668.847504, 21075.158676, 9787.500000, 19575.000000, X, Y) && !ellipse(26148.650940, 26544.058600, 415.974412, 415.974412, 0.000000, X, Y) && !ellipse(26309.295380, 29285.447815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42587.115387, 30486.686615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35184.962738, 14398.814041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19052.992783, 16201.390427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22932.732666, 33947.310211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22752.864680, 28189.386600, 398.454411, 398.454411, 0.000000, X, Y) && !ellipse(33341.010376, 40497.469269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23871.564301, 40922.072174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12779.460000, 29402.393000, 624.977618, 624.977618, 0.000000, X, Y) && !ellipse(26969.350000, 36467.991600, 501.017614, 501.017614, 0.000000, X, Y) && !ellipse(34261.723600, 33085.046000, 389.741611, 389.741611, 0.000000, X, Y) && !ellipse(42339.223267, 26908.001831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29068.249400, 27515.804400, 547.079216, 547.079216, 0.000000, X, Y) && !ellipse(32763.334400, 19467.997800, 347.008810, 347.008810, 0.000000, X, Y) && !ellipse(28812.375200, 32555.935200, 372.752011, 372.752011, 0.000000, X, Y) && !ellipse(21375.605800, 26021.342000, 481.432014, 274.724808, 77.359494, X, Y) && !ellipse(37710.609802, 38953.142273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34588.797150, 21521.579285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19702.144791, 18013.835556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15610.674286, 32493.063049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24811.167600, 25214.448800, 1124.664032, 1124.664032, 0.000000, X, Y) && !ellipse(23885.068000, 27249.052000, 1224.416035, 1224.416035, 0.000000, X, Y) && !ellipse(24103.738647, 24834.200928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23245.180200, 25989.776000, 1201.896035, 1201.896035, 0.000000, X, Y) && !ellipse(30483.628021, 11777.419983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23282.370000, 25253.662400, 1249.696036, 1249.696036, 0.000000, X, Y) && !ellipse(22858.092400, 38306.125600, 412.796812, 412.796812, 0.000000, X, Y) && !ellipse(12157.812668, 29375.986969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26739.694214, 13742.757629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21905.864243, 38445.338715, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 15 21:20:46 2012] Writing fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src1.gif
[Sun Jul 15 21:20:54 2012] Mean detx,y = (4354.30, -5897.12) 
[Sun Jul 15 21:20:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 21:27:51 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 21:27:51 2012] Setting source spectrum file to fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 15 21:27:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 15 21:44:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 15 21:44:31 2012] rmf not generated due to insufficient counts
[Sun Jul 15 22:30:14 2012] Updating aperture counts using extracted products
[Sun Jul 15 22:30:14 2012] Error reading totcts from fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 15 22:30:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:30:14 2012] Using photon index=1.80, rate=0.319, arf fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src1.arf
[Sun Jul 15 22:30:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:30:14 2012] Updating source flux to 3.7e-12
[Sun Jul 15 22:31:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jul 15 22:32:23 2012] xmm0109060201/analysis//spectral/fullrun_mos2_xmm0109060201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete