[Sun Jul 15 09:04:24 2012] Detection parameters:
  Position = (303.0, 335.3) = 16 14 1.43 -22 58 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3552.1 +/- 78.0
  Background counts = 30.5
  Rate = 0.08 +/- 0.002

[Sun Jul 15 09:04:25 2012] Off-axis axis estimate = 2.70'
[Sun Jul 15 11:04:05 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 11:04:05 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Sun Jul 15 11:04:05 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.764
[Sun Jul 15 11:04:05 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.78"
[Sun Jul 15 11:58:57 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jul 15 11:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src3.csv
[Sun Jul 15 11:58:57 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jul 15 11:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src3.csv
[Sun Jul 15 11:58:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 11:58:57 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jul 15 11:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jul 15 11:58:57 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jul 15 11:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jul 15 11:58:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 12:58:26 2012] Spatial fit model total counts = 2742.360000, observed total counts = 3318.000000
[Sun Jul 15 12:58:26 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 15 12:58:26 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 12:58:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 12:58:26 2012] Assessing source extent using major
[Sun Jul 15 12:58:26 2012] Source does appear to be extended
[Sun Jul 15 12:58:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 15:01:09 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 15:01:09 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Sun Jul 15 15:01:09 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.764
[Sun Jul 15 15:01:09 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.78"
[Sun Jul 15 15:47:29 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jul 15 15:47:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_src3.csv
[Sun Jul 15 15:47:29 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jul 15 15:47:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_src3.csv
[Sun Jul 15 15:47:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 15:47:29 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jul 15 15:47:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jul 15 15:47:29 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jul 15 15:47:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jul 15 15:47:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109060201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 16:44:56 2012] Source 4 is offset by -7.102245 and 6.494304 pixels which is larger than
2 X fitted extent = 0.893890 x 0.893890, not incorporating fit results
[Sun Jul 15 16:44:56 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 16:44:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 16:44:56 2012] Assessing source extent using major
[Sun Jul 15 16:44:56 2012] Source does appear to be extended
[Sun Jul 15 16:44:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 20:35:31 2012] Counts = 3552.098633, rescaling region sizes by 2.000000
[Sun Jul 15 20:35:31 2012] XMMSAS src. selection expression = ellipse(26316.750702, 29126.358459, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jul 15 20:35:31 2012] Writing source region out to fullrun_mos1_xmm0109060201_pi300-10000_pass1_cl_src4_src.reg
[Sun Jul 15 20:35:31 2012] Extracting stamp from image fullrun_mos1_xmm0109060201_pi300-10000_cl_sm2.00.img.gz, (228, 260) - (378, 410)
[Sun Jul 15 20:35:31 2012] XMMSAS bgd. selection expression = annulus(26316.750702, 29126.358459, 4350.000000, 8700.000000, X, Y) && !ellipse(23673.117800, 21074.407600, 423.628812, 423.628812, 0.000000, X, Y) && !ellipse(26148.527600, 26553.319000, 424.072812, 424.072812, 0.000000, X, Y) && !ellipse(22964.745688, 33949.532521, 631.624088, 482.040176, 359.048933, X, Y) && !ellipse(22767.104800, 28200.043000, 399.696012, 399.696012, 0.000000, X, Y) && !ellipse(23590.413400, 25452.650540, 1185.880034, 1185.880034, 0.000000, X, Y) && !ellipse(34278.965600, 33085.284600, 409.967212, 409.967212, 0.000000, X, Y) && !ellipse(28836.230133, 32618.837097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23537.171326, 27634.231995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27048.418365, 36496.441010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21360.906204, 26065.014099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24166.956000, 24252.656000, 1189.016034, 1189.016034, 0.000000, X, Y) && !ellipse(29087.409340, 27567.955400, 299.489609, 299.489609, 0.000000, X, Y) && !ellipse(22824.395400, 38316.499800, 707.348020, 348.092810, 320.407724, X, Y) && !ellipse(24688.376099, 25345.647186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24856.704956, 24245.495972, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 15 20:35:31 2012] Writing fullrun_mos1_xmm0109060201_pi300-10000_pass1_cl_src4.gif
[Sun Jul 15 20:36:25 2012] Mean detx,y = (1734.63, -309.82) 
[Sun Jul 15 20:36:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 20:40:05 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 20:40:06 2012] Setting source spectrum file to fullrun_mos1_xmm0109060201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jul 15 20:40:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109060201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jul 15 21:01:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 15 21:01:24 2012] rmf not generated due to insufficient counts
[Sun Jul 15 22:30:13 2012] Updating aperture counts using extracted products
[Sun Jul 15 22:30:13 2012] Error reading totcts from fullrun_mos1_xmm0109060201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jul 15 22:30:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 22:30:13 2012] Using photon index=1.80, rate=0.0821, arf fullrun_mos1_xmm0109060201_pi300-10000_pass1_cl_src4.arf
[Sun Jul 15 22:30:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 22:30:13 2012] Updating source flux to 7.9e-13
[Sun Jul 15 22:30:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting