[Sun Jul 15 09:04:25 2012] Detection parameters:
  Position = (257.7, 292.2) = 16 14 15.72 -23 2 0.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.7 +/- 13.2
  Background counts = 30.0
  Rate = 0.002 +/- 0.0003

[Sun Jul 15 09:04:25 2012] Off-axis axis estimate = 2.99'
[Sun Jul 15 11:04:05 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 11:04:05 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Sun Jul 15 11:04:05 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.160
[Sun Jul 15 11:04:05 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.92"
[Sun Jul 15 11:58:57 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src21.ximg exists
[Sun Jul 15 11:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src21.csv
[Sun Jul 15 11:58:57 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Jul 15 11:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src21.csv
[Sun Jul 15 11:58:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 11:58:57 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Jul 15 11:58:57 2012] fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Jul 15 11:58:57 2012] Fit fullrun_mos1_xmm0109060201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Jul 15 12:58:26 2012] Source 29 is offset by 4.021225 and -1.115494 pixels which is larger than
2 X fitted extent = 0.957163 x 0.957163, not incorporating fit results
[Sun Jul 15 12:58:26 2012] Spatial fit model total counts = 552.001000, observed total counts = 552.000000
[Sun Jul 15 12:58:26 2012] Offset between fit and detection position for source 29 = 0.163729 pixels
[Sun Jul 15 12:58:26 2012] 560.938100 total counts/ 531.627000 bgd. counts: snr = 1.271243
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.163729 pixels
  Position = (257.6, 292.3) = 16 14 15.76 -23 2 1.5
  Extent = 4.3 (2.6-7.2)", rotation angle = 0
  Source counts = 29.3 +/- 23.7
  Background counts = 531.6
  Rate = 0.0006 +/- 0.0004
  Deleting source due to low Poisson probability